Latest Stories
Products Software
Bus Analyzer Plus Data Reconstruction
Data Device Corporation (DDC) (Bohemia, New York) has added data reconstruction and troubleshooting capabilities to its dataSIMS bus analyzer software. Reconstruction, or On-Line Replay, mode enables users...
Briefs Mechanical & Fluid Systems
Parallel Hybrid Vehicles Using Fuzzy Logic Control
A fuzzy logic controller for hybrid vehicles with parallel configuration was proposed. Using the state-of-charge (SOC) of the energy storage, the driver command, and the motor/generator speed, a set of rules was developed. The fuzzy logic controller can determine the split between the electric...
Briefs Mechanical & Fluid Systems
Nozzles for Focusing Aerosol Particles
Several nozzles have been designed to aerodynamically focus aerosol particles into a small-diameter jet, so that individual particles can be illuminated by a laser beam and their light scattering and/or laser-induced fluorescence (LIF) spectra can be measured. An additional nozzle can aerodynamically puff...
Briefs Manufacturing & Prototyping
Functionalized Silk Materials
T he goal of this work was to exploit the novel structural, physical, and biological features of silk proteins towards functionalization of materials systems generated from this family of protein. A new generation of functional silk systems is sought to provide novel materials with precise control of material features....
Briefs Manufacturing & Prototyping
Surface-Plasmon-Enhanced Organic Thin-Film Solar Cells
Fabrication of two-dimensional metal nanoparticle arrays was achieved both by thermal annealing and nanosphere lithography techniques, which are both very fast and economic. The surface plasmon resonance of the fabricated nanostructure was analyzed experimentally by optical absorption...
Briefs Materials
Shape Memory Polymer Process Development
This work introduces a simple technique of separately fabricating electrospun short fibers. This technique employs a paper mesh, which is placed between the needle tip and counter electrode of the...
Briefs Mechanical & Fluid Systems
Nonlinear, High-Fidelity, Aeroelastic Analysis for Novel Configurations
Efforts to develop morphing air vehicles with multiple mission capabilities have recently been undertaken by several research teams, including NASA’s Aircraft Morphing program and the Defense Advanced Research Projects Agency’s (DARPA) Morphing Aircraft Structures program....
Briefs Mechanical & Fluid Systems
Membrane Pump for Synthetic Muscle Actuation
A synthetic muscle has been developed that uses inflatable balloons to produce a tensile force from a positive pressurization. Mechanical supply and ducting is used to provide the required pressurization. However, the mechanical supply and ducting that is currently used is limited in several respects. To...
Briefs Manufacturing & Prototyping
Micro-Propulsion Devices Made of Low-Temperature Co-Fired Ceramics
In the satellite industry, the trend is towards decreasing the size of satellites and clustering of small satellites. Technological advancements in microelectronics have made it more economical to launch a cluster of satellites with a single vehicle rather than the traditional one...
Briefs Manufacturing & Prototyping
Solution Deposition Methods for Carbon Nanotube Field-Effect Transistors
Extensive research has been done on carbon nanotube field-effect transistors (CNTFETs), which may revolutionize electronics. Single-walled carbon nano-tubes (SWNTs) act as...
Briefs Mechanical & Fluid Systems
Designing a Sensorless Torque Estimator for Direct Torque Control of an Induction Motor
Induction motors often are the preferred choice among industrial motors due to the modern power electronics that improve their speed control. Vitally...
Briefs Mechanical & Fluid Systems
Eccentric Mounting and Adjustment System for Belt-Driven Devices
This design relates to an eccentric mounting and adjustment (EMA) system for belt driving, or for belt-driven devices, that is installed and operated within the restricted confines of an engine compartment, typically a motor vehicle. It satisfies two essential requirements for...
Briefs Mechanical & Fluid Systems
Lightcraft Propulsion for Launching a Small Satellite
A study of lightcraft propulsion systems in general has led to the conception and analysis of such a system for launching a small (having a mass no more than a few kilograms) satellite into...
Briefs Mechanical & Fluid Systems
Stability Analysis of Distributed Engine Control Systems
Full Authority Digital Engine Control (FADEC), based on a centralized architecture framework, is being widely used for gas turbine engine control. However, current FADEC is not able to...
Briefs Mechanical & Fluid Systems
Developing Fleets of Autonomous Underwater Vehicles
Autonomous underwater vehicles (AUVs) have a demonstrated capability to collect valuable data for scientific and military purposes. Historically, individual vehicles have been used. To reduce the overall time and cost of acquiring data over large areas, multiple vehicles must be used. A fleet of...
Tech Transfer Reports Software
Scheduling Software Enables On-Time Aircraft Deliveries
Building next-generation aircraft may be a daunting task logistically, but using new software developed with Missile Defense Agency (MDA) funding could save manufacturers time, cost, and...
Tech Transfer Reports Data Acquisition
Web-Based Software Uses Patient Data to Diagnose Cancer
Physicians may soon be able to better prevent and more accurately diagnose breast cancer with the help of battlefield planning software designed for missile defense. Medical Information...
Briefs Data Acquisition
Multi-Agent Software for Airspace Control in the Combat Zone
AGENTFLY software is part of a computer-based system technology that will enhance airspace operation, providing ever-increasing support to personnel without freeing them from the ultimate responsibility. AGENTFLY features distributed coordination mechanisms based on collective...
Briefs Software
Medical Information Network Decision Support System
In order to facilitate a more rapid and systematic transfer of new medical knowledge and capabilities into mainstream clinical practice, a new Medical Information Network Decision Support (MINDS) system has been proposed. This system is intended to be a platform for storing and fusing medical data...
Briefs Software
Software Suite for a Large Defense System
A suite of software tools was developed to enable networks composed of many hundreds, thousands, or even millions of commodity computers to protect themselves against a variety of security threats. These tools include Anagram, a content-based anomaly detection (AD) tool; ASSURE, which provides automatic...
Briefs Software
Virtual Network Computing Software for DataWall Remote Display
VNC (Virtual Network Computing) is open-source software that allows a user to view and interact with a remote computer (known as the VNC server) from a local computer (known as the VNC viewer/client). VNC is used to display multiple remote desktops on the DataWall. The original VNC...
Briefs Manufacturing & Prototyping
Manufacturing Cylindrical Parts Using Deep Draw Technology
In applications where product performance is mission critical, commercial, military, and aerospace companies require technology to manufacture deep- drawn cylindrical product...
Briefs Mechanical & Fluid Systems
Using a Steering Shaping Function to Improve Human Performance in By-Wire Vehicles
Currently, there is a performance issue regarding vehicle control at higher speeds for some indirect-vision, by-wire military vehicles; that is, those vehicles...
Briefs Sensors/Data Acquisition
Microfabrication and Testing of a Thermoelectric Device for Generating Mobile Electrical Power
Several attractive features of thermo-electric (TE) technology include no moving parts, light weight, modularity, covertness, silence, high power...
Briefs Physical Sciences
Considerations of Aeroacoustics in Turbojet-Engine Testing
A study of the aeroacoustics of a turbojet-engine test cell has been performed as one step in the development of a computational aeroacoustics capability (CAA) that could provide...
Briefs Manufacturing & Prototyping
Fabricating Biologically Inspired Artificial Haircell Sensors
As electronics packaging and equipment have decreased in size and weight, so have the potential dimensions of unmanned aircraft. Specifically, a classification of micro air vehicles...
Briefs Mechanical & Fluid Systems
Sensing for Controls and Propulsion Health Management in Turbine Engines
Advances in engine performance and reliability require sensor components that operate reliably under extreme engine operating conditions (e.g., takeoff, max thrust) and in...
Tech Transfer Reports Materials
Ceramic Manufacturing Technique Opens New Markets
Traditionally, ceramics have been thought of as hard and brittle, yet able to tolerate high temperatures. Now, Advanced Ceramics Research (ACR) of Tucson, AZ has developed a method of...
Briefs Mechanical & Fluid Systems
Axial Field Electric Motor
An axial field electric motor comprises one or more elements such as a rotor mounted for rotation and multiple axial flux permanent magnets carried by the rotor. The axial flux permanent magnets are oriented such that...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Energy
SAE Automotive Podcast: Solid-State Batteries
Power
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
