Latest Stories
News Data Acquisition
Aerospace Suppliers Harness PLM, Centralize Data for Collaborative System Design and Development
As the complexity of aircraft rises, it’s becoming more difficult to ensure that all the mechanical and electrical elements work together...
News Defense
Paterson Composites to Build Components for Astro Aerospace Autonomous Passenger Drone
Astro Aerospace, in Carpinteria, Calif., is partnering with carbon composite manufacturer Paterson Composites in Toronto to build components for its new,...
News Design
Boeing Virtualizes, Secures Additive Manufacturing Across Supply Chain with Assembrix
Boeing officials in Chicago are collaborating with Tel Aviv-based Assembrix to manage and protect intellectual property (IP) shared with vendors across...
News Manufacturing & Prototyping
Equispheres Accelerates Additive Manufacturing Innovation with $5M from Lockheed Martin
Aerospace giant Lockheed Martin in Bethesda, Md., is investing $5 million in Ottawa-based materials science company Equispheres to help accelerate the...
INSIDER Aerospace
Aircraft Scheduling Models Ease Traveler Frustration
Flight schedules that allow for a little carefully designed wiggle room could prevent the frustration of cascading airport delays and cancellations. By focusing on the early phases of flight...
News Mechanical & Fluid Systems
FAA, SAE International Focus on Engine Fire Protection System Standards for Aerospace
Aerospace systems, subsystems, and components must continue to operate as intended when exposed to fire, rather than going up in flames and ceasing to...
News Manned Systems
ONERA and DLR Shake up the Airbus BelugaXL Cargo Aircraft
The first five Airbus BelugaXL aircraft are slated to enter service in 2019. But, to reach that milestone, an exhaustive schedule of test and certification work must be completed.
News Manufacturing & Prototyping
Additive Manufacturing Adoption Up, Growing Rapidly in Aerospace
The 3D printing materials market will experience high double-digit growth in the aerospace industry through 2024, as manufacturers of aircraft and spacecraft vehicles and...
INSIDER Manufacturing & Prototyping
Scientists Join Effort to 3D Print Parts for U.S. Navy
Researchers at Lawrence Livermore National Laboratory (LLNL) are lending their expertise in metal additive manufacturing to a new collaboration aimed at 3D printing critical replacement...
News Manned Systems
SAE International Issues First Technical Standards for Aerospace Additive Manufacturing
The Aerospace Material Specification committee on Additive Manufacturing (AMS-AM) at SAE International in Warrendale, Pennsylvania, has released its first...
News Defense
A State-Of-The-Art Coordinate Measurement Instrument
The next generation of civil aircraft are intended to achieve greater fuel efficiency, with natural laminar flow wings. They will also have to be built more quickly and at reduced cost,...
News Test & Measurement
AFRL Demos Advanced Multipurpose Robotics for Aerospace
Engineers from the Air Force Research Laboratory’s (AFRL’s) Manufacturing Technologies Division successfully demonstrated the capabilities of a new multi-purpose maintenance and...
INSIDER Aerospace
Automated Process Prints Aircraft Parts
Copper cables run through the fuselage of aircrafts. They transmit electrical signals for temperature-measuring sensors, LEDs in ceilings, or electronic connections in seats. During their...
Articles Software
Using the Full CAD-CAM-CNC Process Chain in Ultrasonic and Conventional 5-Axis Machining
DMG MORI manufactures a wide variety of conventional chip-cutting and ultrasonic machining centers for OEMs and production job shops serving the aerospace...
Articles Software
Meeting Environmental Objectives and Regulations
Gone are the days when the impact of products on the environment or human health were optional business concerns. Regulatory constraints on materials and chemicals are increasing, and many...
Articles Software
CAM Software Technology Keeps Pace with Aerospace Manufacturing Challenges
Aerospace industry component manufacturing is in a large growth cycle. Advancements to materials and engine efficiency have created clear benefits for replacing a...
Articles Materials
How Additive Manufacturing is Changing the Aerospace Industry
Additive manufacturing was invented more than 30 years ago and, from small beginnings in prototyping, has developed and grown into a $6 billion industry. While additive manufacturing...
Articles Aerospace
Validation of Ubiquitous 2D Radar
Seastema SpA, a company owned by Fincantieri (Genova, Italy), designs, develops, and supplies integrated automation systems for different areas of the marine industry. The company established an Innovation...
Articles Software
Surviving the Challenge of Thermal Design in Aerospace Electronics
The aerospace sector places some uniquely challenging demands on electronics designers. For a start, the environments that the electronics are exposed to are much harsher than...
Briefs Aerospace
In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance
The effective distribution of offensive weapon capabilities to naval units at the tactical edge is a critical focus for Navy leaders. A direct byproduct of this priority is...
Application Briefs Aerospace
Game-Based Training Environment
Charles River AnalyticsCambridge, MA617-491-3474www.cra.com Charles River Analytics Inc., a developer of intelligent systems solutions, has announced a two-year, $2 million Phase III contract to enhance the...
Briefs Transportation
Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments
After extensive review from the US Army Research Laboratory (ARL) Electrical Safety Office, it was...
Briefs Photonics/Optics
Co-Prime Frequency and Aperture Design for HF Surveillance, Wideband Radar Imaging, and Nonstationary Array Processing
A co-prime array uses two uniform linear subarrays to construct an effective difference coarray with certain desirable...
Briefs Photonics/Optics
Low-Cost Ground Sensor Network for Intrusion Detection
Perimeter surveillance of forward operating locations, such as Forward Arming and Refueling Points (FARPs), is crucial to ensure the survivability of personnel and materiel. FARPs are...
News Manufacturing & Prototyping
NASA Invites Proposal from Space-Based Large-Scale 3D-Printing Company
The International Space Station (ISS) is the most collectively expensive object built by humans. The total estimated cost is believed to be close to $150 billion. Aside...
News Connectivity
Boeing to Broaden Its Services Portfolio
June 2017 marked the launch of Boeing’s third major business unit Boeing Global Services. The new unit, which combined aspects of Boeing’s previous Commercial Aviation Services and Global Services...
News Materials
GE Aviation Delivers Improved Turbine Engine During U.S. Army Preliminary Design Review
An updated version of GE Aviation’s T901-GE-900 turboprop engine used in the AH-64 Apache attack and UH-60 Black Hawk utility helicopters...
Application Briefs Mechanical & Fluid Systems
Inertial Measurement Unit
Silicon Sensing Systems Ltd.Plymouth, UK+44 0 1752 723330www.siliconsensing.com Silicon Sensing Systems Ltd's latest DMU30 inertial measurement unit (IMU) has been chosen to provide highly accurate ship's attitude data...
Articles Mechanical & Fluid Systems
Educating UGVs
Advancements in the field of artificial intelligence (AI) are accelerating as the technology matures from being research-orientated to being deployed in a wide range of products and services, such as autonomous vehicles. While...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Energy
SAE Automotive Podcast: Solid-State Batteries
Power
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
