Latest Stories
Products Test & Measurement
New Products
Rapid Deployment SIGINT Sensor VStar Systems (San Diego, CA) announced the addition of a pod version of its MA-C SIGINT Sensor, the MA-C MiniPod™. Two active high frequency (HF) antennas allow for intercept and copy of land...
Articles Sensors/Data Acquisition
Robotic Applique Kits Leverage Existing Assets
When it comes to modern military operations, robotic technology provides a tremendous tactical advantage. Drones, ground robots and autonomous vehicles are routinely used for missions such as...
Briefs Mechanical & Fluid Systems
GPS Enabled Semi-Autonomous Robot
The primary objective of this research is to integrate GPS and local sensory data to allow a robot to operate semi-autonomously outside of a laboratory environment. The Pioneer 3-AT, a robust platform capable...
Briefs Defense
Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences
The advancement of robot capabilities and functionality has changed the way in which soldiers perform many of their...
Application Briefs Sensors/Data Acquisition
Automated Flight System Software
KittyhawkSan Francisco, CA+1 415-598-7757https://kittyhawk.io Kittyhawk recently announced new features to its flight system software platform. Kittyhawk is adding an automated flight system to its Flight Deck...
Articles Aerospace
New Technologies Tackle UAV Challenges
Unmanned vehicles for air, land, and water represent an increasingly-important capability for virtually all military services worldwide. Because each new generation of device technology promises...
Briefs Robotics, Automation & Control
Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs
A team from MIT's Computer Science and Artificial Intelligence Laboratory (CSAIL) unveiled “SoFi,” a soft robotic fish that can independently swim alongside real fish in the ocean....
Briefs Robotics, Automation & Control
Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL
The US Army Research Laboratory (ARL), US Army Tank Automotive Research Development and Engineering Center (TARDEC), DCS Corp., and Naval Surface...
News Manufacturing & Prototyping
Software for Additive Design, Manufacturing Evolves Quickly
The aerospace industry has taken a leadership position in the adoption of additive manufacturing processes, prompting major changes in both design and manufacturing. That’s...
News Aerospace
Avoiding EMI
Aircraft produced and operated today increasingly rely electrical and electronic equipment to perform various functions. If one of these electronic functions were to fail, the impact felt by, say, a passenger jet could be as...
News Aerospace
AeroVironment Releases New Puma 3
Last month, AeroVironment, Inc. began accepting orders for their new Puma 3 unmanned aerial system (UAS). The company, which also manufacturers UASs for commercial applications, developed the Puma 3 with...
News Aerospace
The Next Material Disruption
In a recent joint paper by the Aerospace Technology Institute (ATI) and the National Graphene Institute (NGI) at the University of Manchester, researchers outlined the disruptive impact potential of graphene...
News Electronics & Computers
Stratasys Unveils High-Production Additive Manufacturing Spin-Off
Traditional manufacturers have long sought to combine the benefits of additive manufacturing with the material, quality, and economics of traditional production processes....
Application Briefs Defense
Counter UAV System
SteekRock UAVLondon, UK+44 (0) 20 7491 8186www.sruav.co.uk The use of unmanned aerial vehicles (UAVs) is one of the most significant technological developments in the last decade. However, where once such equipment was unique...
Briefs Manufacturing & Prototyping
Validation of Automated Prediction of Blood Product Needs Algorithm Processing Continuous Non-Invasive Vital Signs Streams (ONPOINT4)
Hemorrhagic shock occurs frequently in natural and man-made disaster scenarios. To control bleeding and to...
Articles Propulsion
Engine Air-Brakes
Airplanes, one of humanity's greatest inventions, evoke feelings of awe and amazement for most people, unless you live uncomfortably close to a major airport, in which case the feeling may become annoyance and irritation....
Articles Aerospace
Designing With Plastics for Military Equipment
U.S. soldiers carry loads of equipment and protective gear that can weigh anywhere from 45 to 130 pounds. This is more than enough to quickly tire even the most well-conditioned personnel,...
Briefs Data Acquisition
Calculation of Weapon Platform Attitude and Cant Using Available Sensor Feedback
When firing artillery, there is typically a maximum angle that the platform cannot exceed relative to the Earth plane. This is due to the large recoil forces...
Articles Aerospace
XPONENTIAL 2018 – An AUVSI Experience
The Association for Unmanned Vehicle Systems International (AUVSI) is bringing this year's XPONENTIAL 2018 to the Colorado Convention Center in Denver, CO. The event, which runs from April 30 – May 3,...
Articles RF & Microwave Electronics
First Air-Worthy Metal-Printed RF Filter Ready for Takeoff
Within the aerospace industry, 2016 and onwards could be looked upon as the tipping point for direct metal printing (DMP), as the technology increasingly made the jump beyond...
Application Briefs Imaging
Rugged Server and Display System
General Micro SystemsRancho Cucamonga, CA(800) 307-4863www.gms4sbc.com General Micro Systems Inc. (GMS) recently announced that the U.S. Army will exclusively deploy powerful rugged server and display systems...
News Aerospace
Rolls-Royce's Next Move
It seems that every large Original Equipment Manufacturing (OEM) aerospace group has now realized that over the long term, there is enhanced profitability to be gained by offering customers a total package that...
News Manufacturing & Prototyping
Breaking Bonds
Bonded composite airframe structures offer a potential to achieve more affordable manufacturing and more efficient structures, ultimately meeting United States Air Force (USAF) goals to increase range and reduce fuel...
News Manufacturing & Prototyping
Roush to Support the Aerospace Industry with the King of Metal 3D Printers
Roush—the Michigan-based product developer—is the first service supplier in North America to install the Concept Laser Xline 2000R, the largest powderbed metal...
News Manufacturing & Prototyping
Faster, Lighter, Stronger: Aerospace Composites Join Together Advanced Materials
Boeing and Airbus forecast a worldwide demand for up to 40,000 new aircraft over the next two decades. With a 10-year production backlog and new aircraft...
News Software
Sharks on a Plane? Skin Scales Lift Aircraft Design
To improve a flying vehicle, sometimes you have to turn to a reliable model that has been operating for hundreds of millions of years.
News Manufacturing & Prototyping
Military, Suppliers Focus on Long-Term Technical Advances, Compatibility
Equipment developers are moving quickly to ensure that military users will have long-term access to boards and modules that provide higher performance, easy...
INSIDER Software
Drones Learn Autonomous Flying by Imitating Cars and Bikes
The algorithm DroNet allows drones to fly completely by themselves through the streets of a city and in indoor environments. It produces two outputs for each single input image: a...
Application Briefs Software
Unmanned Aircraft Training Materials
Bohemia Interactive Simulations (BISim)Orlando, FL+1 407-608-7000https://bisimulations.com The U.S. Air Force Academy has selected VBS3 and VBS Fires FST products from Bohemia Interactive Simulations and...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Energy
SAE Automotive Podcast: Solid-State Batteries
Power
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
