Latest Stories
Briefs Materials
Some Advances in High-Temperature Superconductor Coatings
Several advances were made in a program focused on the science and technology of high-temperature superconductors [especially yttrium barium copper oxide ("YBCO")] deposited on normal electrical conductors. This program was part of a continuing effort to develop superconductor-coated normal...
Briefs Materials
Less-Polluting Resins for Molding Composite Structures
Liquid resins that are suitable for use in molding composite- material structural panels and that contain and emit smaller amounts of air-polluting volatile organic compounds than do...
Articles Defense
Micro Air Vehicles Serve as Eyes in the Sky for Ground Troops
Honeywell Aerospace has developed the Micro Air Vehicle (MAV), an unmanned aerial vehicle (UAV) based on ducted-fan technology that recently was deployed in Iraq to identify...
Briefs Mechanical & Fluid Systems
Generic Miniature Airplane for Research and Development
The Air Force Research Laboratory has promulgated the geometrical design of a miniature airplane denoted the Generic Micro Aerial Vehicle (GENMAV). This design is intended to serve as a...
Briefs Mechanical & Fluid Systems
Simulations of Brush Contacts of Homopolar Motor/Generators
A computational- simulation study of distributions of electric current and temperature in brushes and slip rings in two model homopolar- motor/generator configurations was performed in...
Briefs Manufacturing & Prototyping
Experiments in Vacuum Brazing of Titanium
An experimental study of vacuum brazing of titanium and of the effects of changes in brazing alloys and brazing process conditions has been performed. [As used here, “titanium” signifies both...
Briefs Manufacturing & Prototyping
Advances in Fabrication of Nanoscale Devices
Some advances have recently been made on several fronts in a continuing effort to develop of means of fabricating electronic and magnetic devices having dimensions of the order of tens to hundreds of...
Briefs Manufacturing & Prototyping
Inexpensive Free-Form Fabrication of Titanium-Alloy Parts
A continuing effort to devise relatively inexpensive means of manufacturing titanium-alloy parts has been focused on a free-form fabrication approach. As used here, “free-form...
Briefs Materials
Making Ultra-Hydrophobic Textured Silicone-Rubber Surfaces
Silicone-rubber surfaces microscopically textured in such a manner as to render them ultra-hydrophobic have been fabricated by a method in which breath figures are utilized. Originally,...
Briefs Materials
High-Temperature Resins for Composite Materials
Improved, readily processable thermosetting polymer resins are being developed for use as matrix materials in composite-material structures in applications in which there are requirements for...
Briefs Materials
High-Strain-Rate Tests of Epoxy/Aluminum-Powder Composites
Initial tests have been performed in a continuing experimental study to determine selected mechanical properties, at high strain rates, of an epoxy and of composite materials consisting...
Briefs Materials
Continuous Carbon Nanofibers for Structural Composites
A program of research has addressed key issues in the production of continuous carbon nanofibers and the utilization of carbon nanofibers as the reinforcing components in matrix/fiber...
Articles Design
Data-Centric Distributed Application Architecture for Shipboard Systems
System architects design distributed applications leveraging computer resources connected by a network infrastructure: CPU-intensive tasks may be located on powerful core...
Products Software
Military Training Simulation Software
Aptima, Inc., Woburn, MA, has announced the DDD 4.0 desktop simulation software for training military and civilian teams. DDD can model a range of environments, including AWACS air battle management,...
Briefs Mechanical & Fluid Systems
Establishment of a Center for Defense Robotics
A document presents an overview of the recently established Joint Center for Unmanned Ground Vehicles (JC-UGV), located at the Army's Detroit Arsenal in Warren, Michigan. The JC-UGV is intended to become the central facility for managing all phases of the life cycles of military robotic ground...
Briefs Physical Sciences
Castable, Relatively Stiff Acoustic-Damping Materials
A recently invented family of acoustic-damping materials offers advantages over prior acoustic-damping materials:
Briefs Materials
Low-Water-Permeability Encapsulants for Acoustic Sensors
Afamily of improved encapsulating materials for protecting underwater acoustic sensors has been invented. These materials could also be used for encapsulation or protective coating of...
Briefs Materials
Improved Dielectric-Breakdown Property of POSS-Filled Epoxy
A n experimental study has shown that the AC short-term dielectric breakdown potential of material specimens consisting of polyhedral oligomeric silsesquioxane (POSS) nanoparticles...
Briefs Materials
Alloys for Nozzles of Hypersonic Wind Tunnels
Alloys are being developed for nozzles of hypersonic wind tunnels to be used in testing components of future hypersonic missiles, aircraft, and space transportation systems. The nozzle components...
Tech Transfer Reports Mechanical & Fluid Systems
Piezoelectric Actuator Amplifies Small Motions
Engineers at Dynamic Structures and Materials, LLC (DSM, Franklin, TN) have used funding from a Missile Defense Agency (MDA) Small Business Innovation Research (SBIR) Phase II grant to squeeze an...
Briefs Manufacturing & Prototyping
Fabrication of Lightweight Armored Doors for HMMWVs
A document describes a concept for fabricating lightweight armored doors for the Army’s high-mobility multipurpose wheeled vehicles (HMMWVs). Essentially, the concept is to reinforce high-hard (HH) steel armored doors used on some HMMWVs with a laminated, woven, high-tensile-strength glassfiber/...
Briefs Test & Measurement
Small-Scale Combustion-Chamber Testing Facility
A small-scale combustion-chamber testing facility has been designed and partly built for use in evaluating advanced combustor designs for future gas turbine engines. The specific model combustor...
Briefs Mechanical & Fluid Systems
Some Advances in Reducing Drag and Suppressing Convection
Theoretical and computational research has yielded some advances in the art of designing active feedforward and feedback controllers to suppress thermal convection and reduce drag (by...
Briefs Mechanical & Fluid Systems
Hybrid Three-Axis Vibration Reducers
Hybrid (passive/active) devices have been developed to reduce the magnitudes of possibly threedimensional vibrations coupled from vibrating equipment on platforms to bases that support the platforms. These...
Briefs Materials
Self-Lubrication of Hot YSZ-Ag-Mo Nanocomposite Coatings
An experimental study has been performed to learn about the physical and chemical mechanisms of self-lubrication of coatings that comprise nanostructured composites of yttria-stabilized...
Briefs Materials
Photonic Analog-to-Digital Converters
Early steps have been taken toward the development of analog-to-digital converters (ADCs) that would incorporate photonic quantizers based on the technology of InP semiconductors. These photonic ADCs are...
Briefs Physical Sciences
Solid-State Viscosity Sensors For Military and Aerospace Applications
Embedded OEM application markets such as the military and aerospace industries are experiencing a growing demand for sensors that provide instantaneous and continuous process...
Briefs Materials
Nanoparticle AlxMoyOz/Al Thermites
Research on the microstructures, chemical compositions, and reactivities of thermites that consist of or contain mixtures of MoO3 and Al particles has led to development of a process for making thermites that...
Briefs Materials
Polymeric “Smart” Skin Materials
"Smart” skin materials based, variously, on polymers, dendrimers, carbon nanotubes, and/or other tailored molecular components are being developed for use as conformal coating surfaces of mechanical structures, including those of aircraft, to impart enhanced functionality to the coated surfaces. As used here,...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Automotive
Hydrogen Engines Are Heating Up for Heavy Duty
Power
SAE Automotive Podcast: Solid-State Batteries
Automotive
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
