Latest Stories
INSIDER Materials
The Critical Impact Of SAE Aerospace Standards: Certified AS1895/7 and /23 Metal Seals
In an industry where failure is not an option and precision is paramount, aerospace manufacturers and suppliers are constantly seeking components and...
INSIDER RF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
The Federal Aviation Administration (FAA) has issued separate contract awards to RTX subsidiary Collins Aerospace and Indra for its "Radar System Replacement" program.
Podcasts Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
On this episode of the Aerospace & Defense Technology podcast, Corsha CEO Anusha Iyer explains how machine identity, continuous authentication, and secure connectivity are accelerating digital transformation for the U.S. Air Force Sustainment Center. Listen now!
INSIDER Materials
New 3D-Printable Nanocomposite Prevents Overheating in Military Electronics
U.S. Army and university researchers collaborated to develop a 3D-printable material using tiny particles that conduct heat and can be used to more efficiently cool...
INSIDER Manufacturing & Prototyping
APFIT Invests $50 Million into US-Made Drone Battery Production for Air Force, Army, Navy, and SOCOM
The Defense Department’s APFIT program has committed up to $50 million to Packet Digital to fast-track production of advanced batteries...
INSIDER Unmanned Systems
New Defense Department Program Seeks 300,000 Drones From Industry by 2027
The U.S. Department of War, on Dec. 2, outlined a new program where it is seeking the development of more than 300,000 drones "quickly and inexpensively" from...
Podcasts Manufacturing & Prototyping
How Packet Digital Is Scaling Domestic Drone Battery Manufacturing
On this episode of the Aerospace & Defense Technology podcast, Packet Digital CEO Terri Zimmerman breaks down the company’s push to expand U.S.-based production of advanced lithium-ion batteries for military unmanned aircraft systems. Listen now!
News Materials
SAE Books: 'Automated Fiber Placement' with Ramy Hari
Ramy Harik, a Fulbright alumnus and director of the Clemson Composites Center, is pushing the boundaries of manufacturing with his latest book, Automated Fiber Placement: Status,...
Articles Materials
High-Flying Output: Key Machining Techniques for Structural Aircraft Components
Structural aircraft components and the methods for making them have changed significantly, driven by advancements in technology and new demands in the industry. Aerospace assemblies are becoming lighter and more complex, while every aspect of how these components are designed and made is evolving. Read on to learn more.
Products Software
New Products
See the new products, including Kontron's VX307C, a rugged 3U VPX computing module based on the Intel® Xeon® D-1700/1800 platform; Concurrent's Narvi, a rugged XMC form factor GPGPU and graphics processing card developed in collaboration with EIZO Rugged Solutions; ITT Cannon’s C5 Warrior connectors; and more.
Application Briefs Manufacturing & Prototyping
A New Clean Room for Missile and Satellite Propulsion Components
Moog Inc. announced the groundbreaking on its new clean room in Niagara Falls, New York. This will support the growing demand Moog is seeing for innovative satellite and missile propulsion components and systems from space and defense customers. Read on to learn more.
Application Briefs Aerospace
Collaborative Combat Aircraft Engine Testing
Raytheon’s Pratt & Whitney is developing a new family of engines, scalable from 500 to 1,800 pounds of thrust, that are capable of powering munitions and Collaborative Combat Aircraft. Read on to learn more.
INSIDER Manufacturing & Prototyping
Using Ultrabright X-Rays to Test Materials for Ultrafast Aircraft
This might seem like an obvious statement, but designing an aircraft that flies at five to seven times the speed of sound is difficult. Paradoxically, materials for...
Podcasts Manufacturing & Prototyping
How Virtual Twins are Reshaping Aerospace Design and Manufacturing
On the latest episode of the Aerospace & Defense Technology podcast, we sit down with two experts from Dassault Systèmes: Mariah Otte, Aerospace & Defense Solution Architect, and Jason Roberson, Industry Value Expert. Listen now!
Podcasts Manned Systems
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
On this episode of the Aerospace & Defense Technology podcast we examine the technical and strategic foundations behind Guam’s new advanced manufacturing hub. Neal Orringer of ASTRO America and Alex Benham of GAMMA are the guests to discuss the facility’s additive manufacturing capabilities, supply-chain objectives, and workforce development plans. Listen now!
INSIDER Manned Systems
DESCAM Project to Establish Additive Manufacturing Supply Chain for Flight-Ready Parts
GKN Aerospace has joined the Digitally Enabled Competitive & Sustainable Additive Manufacturing (DECSAM) project.
INSIDER Test & Measurement
Stevens Researchers Test Morkovin's Hypothesis for Major Hypersonic Flight Breakthrough
If it were to become a reality, hypersonic flight, long the realm of science fiction, could revolutionize global travel, transforming day-long...
INSIDER Sensors/Data Acquisition
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
L3Harris is ready to start low-rate initial production of the Viper Shield, a next-generation software-defined electronic warfare (EW) upgrade for the U.S. Air Force fleet of F-16...
Podcasts Aerospace
The Hidden Heroes of Hydrogen Flight: Sealing and Materials
In this sponsored episode of the Aerospace & Defense Technology podcast, Margaux Ningre-Coirier, Aerospace Sales and Market Development Manager at Omniseal Solutions, is the guest to analyze how advanced sealing solutions are becoming the hidden enablers of safe, efficient hydrogen-powered advanced air mobility (AAM). Listen now!
INSIDER Mechanical & Fluid Systems
A New Solid Rocket Motor Facility for Lockheed Martin and Raytheon
Avio, the Italian space propulsion manufacturer, recently announced separate deals with Lockheed Martin and Raytheon to establish a new solid rocket motor (SRM) production...
INSIDER Test & Measurement
NASA’s Quiet Supersonic Demonstrator Jet Completes First Flight
Lockheed Martin Skunk Works, and NASA recently completed the first flight of the X-59, a quiet supersonic aircraft that is being flight tested to help establish an acceptable...
INSIDER Propulsion
Joby Taps NVIDIA for Superpilot, Starts Manufacturing eVTOL Propeller Blades
Joby Aviation, the California-based startup, recently announced major program milestones toward its goal of developing a new electric vertical takeoff and landing...
INSIDER Aerospace
Airbus Expands Assembly Lines to Prepare for Historic A320 Production Rate Increase
Responding to strong demand from airlines and lessors, Airbus is ramping up all its commercial aircraft programs. The company’s industrial capability is...
INSIDER Robotics, Automation & Control
Anduril Completes First Semi-Autonomous Flight of CCA Prototype
Anduril Industries has started flight testing its prototype Collaborative Combat Aircraft (CCA), the YFQ-44A, at an Air Force research facility in California.
INSIDER RF & Microwave Electronics
A New AI-Piloted VTOL Fighter Jet for Contested Environments
Shield AI unveiled its new artificial intelligence (AI)-powered vertical takeoff and landing (VTOL) fighter jet, X-BAT, during an event held in Washington D.C. last week.
INSIDER Defense
AUSA 2025: Secretary Driscoll Wants Army to Save Time and Money by 3D-Printing Replacement Parts
U.S. Army Secretary Dan Driscoll's brutally honest keynote speech to open AUSA's 2025 annual meeting included a focus on how much money the...
INSIDER Robotics, Automation & Control
AUSA 2025: The Army's New Anti-Vehicle Terrain Shaping Munition is Ready for Deployment
Textron Systems recently delivered the first XM204 Top Attack Munition to the U.S. Army in support of its European operations. XM204 is an anti-vehicle...
INSIDER Unmanned Systems
In-Flight 3D Printing of Drone Parts on a Black Hawk Helicopter
The Indiana Army National Guard, in collaboration with the Office of the Under Secretary of Defense for Research and Engineering, achieved a historic milestone during August's...
INSIDER Design
AUSA 2025: New CMOSS Chassis, Plug-in-Card Prototypes in Development for Army Vehicles
The U.S. Army has selected two companies to develop prototype chassis and plug-in-cards for aviation and ground vehicles. The selection is the Army’s...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Energy
SAE Automotive Podcast: Solid-State Batteries
Power
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
