Latest Stories
INSIDER Defense
What is the Defense Innovation Unit’s New Blue Manufacturing Program?
For nearly a decade, the Defense Innovation Unit (DIU) has identified, prototyped and scaled commercial technologies that deliver advantages to warfighters. To meet...
INSIDER Design
A New Additive Manufacturing Strategy for the UK Defense Industry
The U.K.'s Ministry of Defense (MoD) published a new 17-page strategy outlining their vision for the wider use of advanced manufacturing and specifically additive...
INSIDER Defense
Two Startups Partner to Expand Hydrogen-Powered Drone Production
Two U.S.-based startups have formed a new partnership that will see the use of a "survivable manufacturing network" to produce hydrogen-powered drones. California-based...
Application Briefs Manufacturing & Prototyping
6.8 MM Ammunition Production Facility
The U.S. Army’s Joint Program Executive Office for Armaments and Ammunition, along with the Joint Munitions Command, officially broke ground on a new 6.8 mm ammunition production facility in support of the Next Generation Squad Weapon Program at the Lake City Army Ammunition Plant in Missouri. Read on to learn more about the 6.8 mm family of ammunition, set to be produced at the new facility.
Application Briefs Manufacturing & Prototyping
Eurofighter Common Radar System Upgrade
The Eurofighter Common Radar System Mark 1 project is the next-generation Eurofighter radar that is to be fielded by the air forces of Germany and Spain. This E-Scan radar will enhance the capabilities of the Eurofighter — which Airbus produces for the German and Spanish air forces — in air-to-air and air-to-ground operations and also equip it with electronic warfare capabilities. Read on to learn more.
Articles Mechanical & Fluid Systems
Manufacturing Spotlight: Advanced Drilling, Threading and Milling Tools Maximize Productivity in Challenging Aerospace Materials
Before threading holes, drilling is a necessary and critical step. Drilling challenging aerospace materials demands an application-specific solution. Stainless, titanium, and nickel- based alloys are highly heat resistant so heat generated during the drilling process is pushed into the cutter. Read on to learn more.
INSIDER Manufacturing & Prototyping
GE Aerospace is Investing $1 Billion in New Facilities, Materials and Parts
GE Aerospace plans to invest nearly $1 billion in its U.S. factories and supply chain to strengthen manufacturing and increase the use of innovative new parts and...
Videos Semiconductors & ICs
Intel's Progress on Developing Next-Generation Computer Chips for Defense Applications
Watch this video from Aerospace & Defense Technology to learn how Intel has been advancing the development of prototype computer chips for defense applications in recent years, as well as insights about their Intel18A technology.
INSIDER Defense
Smart Stacking Tool Improves Rotor Assembly Process for F-35 Engines
The Oklahoma City Air Logistics Complex has implemented a modernized method to assemble rotor components in the F135 jet engine.
INSIDER Manned Systems
3D-Printed Temporary Use Parts Reduce Downtime for Army Vehicles
Army additive manufacturing experts are using an advanced materials process to replace damaged ground vehicle parts more quickly, reducing vehicle down-time in formations.
INSIDER Defense
Microsoft, PsiQuantum Designing Quantum Computer Prototypes for DARPA US2QC Program
The Defense Advanced Research Projects Agency (DARPA) has selected Microsoft and PsiQuantum to move to the final design stage of its Underexplored Systems...
INSIDER Defense
Startup Develops Manufacturing Breakthrough for Traveling-Wave Tubes
Traveling-wave tubes (TWTs) are a type of vacuum tube critical for many high-performance applications, including deep space missions, satellites, and electronic warfare....
INSIDER Design
3D Printing Parts for Ships, Submarines and Underwater Vehicles
Additive manufacturing has been a game-changer in helping to create parts and equipment for the Department of Defense’s (DoD's) industrial base. A naval facility in...
INSIDER Research Lab
DARPA is Transitioning NOM4D from Labs to In-Space Manufacturing Demos
Based on outstanding technical progress by research teams to date, DARPA has pivoted the third and final phase of its NOM4D (pronounced nō- mad) program[1] from planned...
Podcasts Electronics & Computers
UxV/35: A New Approach to Lowering the Cost of Designing Drones
On the first episode of Season 7 of the Aerospace & Defense Technology podcast, Dom Koenig, Marketing Manager, Kairos Autonomi, explains how the UxV/35 standard could be used to lower the cost of designing and manufacturing drones in the future.
Articles Mechanical & Fluid Systems
Manufacturing Spotlight: Machining Complex Parts and Materials for Space Flight and Exploration
This is the first article in a new section of Aerospace & Defense Technology called “Manufacturing Spotlight,” where we will cover some of the latest machines, tools, and other technologies being used by aerospace and defense industry design and manufacturing engineers. The first topic in this new section is “Machines,” specifically the computer numerical control machines. Read on to learn more.
Application Briefs Software
Quantum Processor Unit Manufacturing
STMicroelectronics has signed a new collaboration agreement with French quantum computing startup Quobly to produce quantum processor units at scale. This collaboration is set to make large-scale quantum computing feasible and cost-effective. Read on to learn more.
Application Briefs Aerospace
Updated High-Pressure Turbine Kit for A320neo Engine
In December, the Federal Aviation Administration and the European Union Aviation Safety Agency certified the updated high-pressure turbine hardware durability kit for the CFM LEAP-1A engines that power Airbus A320neo family aircraft. Read on to learn more about the durability kit.
Application Briefs Manufacturing & Prototyping
Autonomous Undersea Vehicle Completes 100-Hour Demonstration
Anduril Industries is trying to define the next frontier of autonomous maritime operations. Just as the Dive-LD set a new global standard for Large-Diameter Autonomous Undersea Vehicles (LD-AUV), the Dive-XL, Anduril’s commercial Extra-Large Autonomous Undersea Vehicle (XL-AUV), is setting a new global standard for what is possible for vehicles of this size. Read on to learn more.
Articles Materials
Shape-Shifting Antenna Poised to Transform Communications
By leveraging cutting-edge additive manufacturing techniques and shape memory alloys, researchers have created an antenna that can change its shape based on its temperature. This technology has transformative potential in a wide range of military, scientific and commercial applications. Read on to learn more.
INSIDER Materials
Clean Sky Demonstrator Fuselage Shows Potential of Thermoplastics in Aircraft Production
Suspended between discrete skeletal jigs, it wouldn't attract a second glance on an aircraft assembly line. Yet inside an anonymous hangar in northern...
INSIDER Manufacturing & Prototyping
Supernova to 3D Print Military Grade Energetic Materials
The American Center for Manufacturing & Innovation (ACMI) has awarded a $2 million subcontract to Supernova Defense & Space to 3D print military-grade energetic materials.
INSIDER Aerospace
How the Navy is Using Additive Manufacturing to Protect Submarine Hatch Bolts
Commander, Submarine Forces is researching the usage of additive manufacturing (AM) technology to address operational needs, in collaboration with midshipmen from...
INSIDER Defense
Using Squeezed Light to Develop Sensors That Defy Defense Limits
Raytheon’s BBN Technologies is developing next-generation, compact, low-power, deployable photonic sensors that will provide users with better awareness of environmental...
INSIDER Materials
Characterizing the Performance of Variable Emissivity Materials in Space
The Air Force Research Laboratory (AFRL) launched the Space Power InfraRed Regulation and Analysis of Lifetime, or SPIRRAL, experiment, Nov. 4, 2024. SPIRRAL, flown by...
INSIDER Design
Advancing Metal Alloy Systems and Processes for Defense Manufacturing
The Office of the Secretary of Defense (OSD), Innovation Capability and Modernization (ICAM) Office, in collaboration with the National Center for Defense Manufacturing...
INSIDER Manufacturing & Prototyping
Lockheed Martin Adds New Additive Manufacturing Machines to Texas Facility
Lockheed Martin recently added 16,000-square-feet of new additive manufacturing space to their facility located in Grand Prairie, Texas. This expansion includes some...
Articles Materials
Making a Material Difference in Aerospace & Defense Electronics
Laminate materials are indispensable in the manufacture of boards and flexible circuitry for aerospace and defense electronics. Their unique properties address stringent demands, ensuring systems perform reliably under extreme conditions. Read on to learn more.
Briefs Physical Sciences
Scientists Fuse Simulations and Machine Learning to Accelerate Novel Additively Manufactured Materials
Researchers at the Johns Hopkins Applied Physics Laboratory have demonstrated a novel approach for applying machine learning to predict microstructures produced by a widely used additive manufacturing technique. Read on to learn more.
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Energy
SAE Automotive Podcast: Solid-State Batteries
Power
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
