Latest Stories
News Unmanned Systems
NASA and AeroVironment Are Building a Helicopter for Mars
Last week, AeroVironment, Inc. of Monrovia, Calif. revealed its critical role in collaborating with NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, Calif. to build the “Mars...
News Automotive
ISS Launches Largest Satellite to Date to Test Active Debris Removal
Astronauts on the International Space Station (ISS) have launched RemoveDEBRIS, the first satellite with space debris-removal capabilities and the largest satellite ever...
News Power
Audi Confirms E-Tron EV to Use Cameras Instead of Side Mirrors
In what is claimed to be the world’s first series-production application of camera technology to replace exterior side-view mirrors, Audi announced that its upcoming e-tron...
News Defense
SAE International Issues, Revises Technical Reports for Aerospace Engineering
Standards development teams at SAE International in Warrendale, Pa., have issued 11 new technical documents and revised or reaffirmed another 54 technical reports...
INSIDER Manufacturing & Prototyping
Laser-Made Parts Could Transform Aircraft Industry
Researchers are manufacturing steel and titanium aircraft parts using laser metal deposition technology. It can be used to 3D-print parts from scratch or to fix existing parts with a bond...
News Green Design & Manufacturing
JAXA Establishes New Aircraft Electrification Consortium
The Japan Aerospace Exploration Agency (JAXA) launched the Electrification Challenge for Aircraft (ECLAIR) consortium in collaboration with IHI Corporation; Kawasaki Heavy...
INSIDER Aerospace
NASA UAV Flies Alone in Public Airspace
NASA’s remotely piloted Ikhana aircraft successfully flew its first mission in the National Airspace System without a safety chase aircraft on Tuesday. Flying these large remotely piloted aircraft...
News Manufacturing & Prototyping
First Airbus BelugaXL Oversize Cargo Airlifter Emerges from Paint Shop with Employee-Selected, Whale-Inspired Livery
The first BelugaXL transport aircraft from Airbus has rolled out of the paint shop, unveiling a special livery emulating a...
News Software
Boeing Debuts First Hypersonic Passenger Aircraft Concept
Officials and engineers at Boeing in Seattle are offering a glimpse into their vision for hypersonic air travel. They have released, for the first time, images of one of the...
News Defense
General Atomics Plans First Trans-Atlantic Flight of Medium-Altitude, Long-Range Remotely Piloted Aircraft
General Atomics Aeronautical Systems Inc. (GA-ASI) in San Diego plans to make the first-ever, trans-Atlantic flight of a...
News Electronics & Computers
AI Closes the Loop for Composites Manufacturing
Composite manufacturing, although state of the art in terms of product performance, remains something of a craft in terms of manufacturing. Even when processes are physically automated, highly...
News Defense
Northrop Grumman Acquires Orbital ATK, Adds Solid Rocket Motors to Space Portfolio
Northrop Grumman Corp., an aerospace and defense technology company in Falls Church, Va., has acquired Orbital ATK Inc., one of only two leading U.S....
News Data Acquisition
Aerospace Suppliers Harness PLM, Centralize Data for Collaborative System Design and Development
As the complexity of aircraft rises, it’s becoming more difficult to ensure that all the mechanical and electrical elements work together...
News Aerospace
Engineering, Simulation, Test Tools Help Bombardier Business Jet Achieve Milestones, Exceed Expectations
The Global 7500 business jet from BombardierInc. in Montreal appears to be on the fast track to entering service, thanks in large part to...
News Defense
Paterson Composites to Build Components for Astro Aerospace Autonomous Passenger Drone
Astro Aerospace, in Carpinteria, Calif., is partnering with carbon composite manufacturer Paterson Composites in Toronto to build components for its new,...
News Manufacturing & Prototyping
Boeing Virtualizes, Secures Additive Manufacturing Across Supply Chain with Assembrix
Boeing officials in Chicago are collaborating with Tel Aviv-based Assembrix to manage and protect intellectual property (IP) shared with vendors across...
News Aerospace
Equispheres Accelerates Additive Manufacturing Innovation with $5M from Lockheed Martin
Aerospace giant Lockheed Martin in Bethesda, Md., is investing $5 million in Ottawa-based materials science company Equispheres to help accelerate the...
INSIDER Aerospace
NASA CubeSats Head to Mars
NASA has achieved a first for the class of tiny spacecraft known as CubeSats. The MarCO-A and MarCO-B CubeSats are designed to trail InSight on the way to Mars, aiming to relay back data about InSight as it enters...
INSIDER Defense
Aircraft Scheduling Models Ease Traveler Frustration
Flight schedules that allow for a little carefully designed wiggle room could prevent the frustration of cascading airport delays and cancellations. By focusing on the early phases of flight...
News Manned Systems
FAA, SAE International Focus on Engine Fire Protection System Standards for Aerospace
Aerospace systems, subsystems, and components must continue to operate as intended when exposed to fire, rather than going up in flames and ceasing to...
News RF & Microwave Electronics
Insitu ScanEagle SUAS Boosts Coast Guard Mission Effectiveness
U.S. Coast Guard officials are expanding their deployment of small unmanned aircraft systems (sUAS) for intelligence, surveillance, and reconnaissance (ISR) operations, after...
News Manned Systems
A New ‘Works’ Is in the Works
This week, Pratt & Whitney, a division of United Technologies Corp. (UTC), announced the establishment of GatorWorks, a newly formed prototyping arm that will focus on the rapid and agile development...
News Defense
Additive Manufacturing Adoption Up, Growing Rapidly in Aerospace
The 3D printing materials market will experience high double-digit growth in the aerospace industry through 2024, as manufacturers of aircraft and spacecraft vehicles and...
News Automotive
ONERA and DLR Shake up the Airbus BelugaXL Cargo Aircraft
The first five Airbus BelugaXL aircraft are slated to enter service in 2019. But, to reach that milestone, an exhaustive schedule of test and certification work must be completed.
INSIDER Manufacturing & Prototyping
Scientists Join Effort to 3D Print Parts for U.S. Navy
Researchers at Lawrence Livermore National Laboratory (LLNL) are lending their expertise in metal additive manufacturing to a new collaboration aimed at 3D printing critical replacement...
INSIDER Sensors/Data Acquisition
New Device Detects Damage to Body Armor
Cardiff University’s School of Engineering joined forces with California-headquartered Microsemi to develop A-Ultra – a lightweight handheld system that uses ultrasound to spot damage to personal...
INSIDER Defense
Army Develops Dual Pulse Rocket Motor to Support Warfighter
A team at the U.S. Army Research, Development and Engineering Center, Aviation and Missile, has been working to develop a new dual pulse rocket motor incorporating insensitive...
News Manufacturing & Prototyping
SAE International Issues First Technical Standards for Aerospace Additive Manufacturing
The Aerospace Material Specification committee on Additive Manufacturing (AMS-AM) at SAE International in Warrendale, Pennsylvania, has released its first...
News Transportation
Equipmake's 'Cool' Motor Technology
There is a subdued hum in the emerging world of the EV: the sound of several types of electric motor vying for top podium position within the industry.
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Automotive
Hydrogen Engines Are Heating Up for Heavy Duty
Power
SAE Automotive Podcast: Solid-State Batteries
Automotive
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
