Latest Stories
Products Defense
PEEK Wear Compounds
The LUVOCOM 8000 series of PEEK wear compounds from Lehvoss North America incorporates proprietary additives that further elevate the wear resistance of PEEK compounds. Through research and testing, Lehvoss designed the LUVOCOM 8000 product line to have a tribological profile significantly surpassing previously known materials...
Products Aerospace
Wire Grid Polarizers
High-contrast IR wire grid polarizers from Edmund Optics are suited for broadband IR applications that require high transmission and contrast, including spectroscopy and thermal imaging. The polarizers are made by applying a thin layer of aluminum microwires to a glass window. They are designed using a lightweight, thin silicon...
Products Defense
Voltage Controlled Oscillator
Crystek’s CVCO25CL-0902-0928 VCO operates from 902 to 928 MHz, with a control voltage range of 0.5 to ~3.5V. It features a typical phase noise of -108 dBc/Hz @ 10 kHz offset and has excellent linearity. Output power is typically +3 dBm. The model is packaged in the industry-standard 0.5- × 0.5-in SMD. Input voltage...
Products
Rackmount Computer
The Trenton TMS4703 4U rackmount MIL-STD military computer from Trenton Systems (Gainesville, GA) is designed for mounting in a 19" component rack or a transit case. The TMS4703 has flexible MIL-DTL-38999 and MIL-STD-1553...
Products
Laser Encoders
HS10/HS20 laser encoders from Renishaw (Hoffman Estates, IL) allow Flow International Corporation’s Composite Machining Center (CMC) to machine 40-meter-long composite parts. With the precision of a laser interferometer, the...
Products
Tube Heaters
Birk Manufacturing (East Lyme, CT) has announced RAPT°R (Rigid and Pliable Tube of Resistance), a heated delivery system that ensures that any liquids or gases transported will remain at the same temperature or arrive at an...
Products
Avionics Digital Panel Meter
Specifically designed to replace “needle” meters in military aircraft, the new APM model from OTEK Corp. (Tucson, AZ) conforms to military and commercial 1"-diameter standards, as well as a variety of...
Products
Integrated Circuits Support
Rochester Electronics (Newburyport, MA) has expanded manufacturing and support services of obsolete and active MIL-STD-883 and MIL-PRF-38535 integrated circuits. Through its Extension-of-Life® products, Rochester...
Articles Aerospace
Using Forensic Lasers in Modern Warfare
In the conflicts in Iraq and Afghanistan, the enemy’s guerilla tactics have muddled the distinction between terrorism and warfare. To deal with the challenges of this new type of combat, the military...
Articles Defense
Open Generic Avionics Architectures and Distributed Processing Using Ethernet and VPX
The backplane and hardware module standards help to increase part commonality and the reuse of components in different system architectures and applications,...
Articles Aerospace
Comparing Blade-Element Momentum Modeling to 3-D CFD
Many small unmanned aerial vehicles (SUAVs) are driven by small-scale fixed-blade propellers, and the flow produced by the propeller can have a significant impact on the aerodynamics of the...
Articles Aerospace
Europe's Aerospace Industry Looking Confident
Talk of further consolidation within Europe’s dynamic aerospace sector has been on the lips of industry watchers for several years, but although the major European-based global players have not...
Articles Aerospace
Advances and Challenges in Developing Radar Applications
Radar is used to detect and/or track target objects and their attributes, such as range, speed, and other information obtained through signals at RF and microwave frequencies. The broad...
Articles Aerospace
Hybrid-electric distributed propulsion explored
A turboelectric distributed propulsion (TeDP) system is a powertrain consisting of a turboshaft engine used solely to provide electrical power through a generator to electric motors driving...
Articles Aerospace
Simulation Tools Prevent Signal Interference on Spacecraft
Launching a satellite into space requires painstaking preparation, not only to make sure that a multitude of technologies are functioning, but also to ensure that critical components...
Application Briefs Aerospace
Transparent Display Technology
Edgewood Chemical Biological Center Aberdeen, MD 410-436-7118 www.ecbc.army.mil The U.S. Army Edgewood Chemical Biological Center (ECBC) has partnered with the Massachusetts Institute of Technology’s Institute...
Application Briefs Defense
Spatial Disorientation Flight Simulator
Environmental Tectonics Corporation (ETC) Southampton, PA 215-355-9100 www.etcusa.com Aircrew Training Systems (ATS), a division of Environmental Tectonics Corporation, has been selected by the U.S. Army...
Application Briefs Defense
Multi-Role Close Air Support Weapon
MBDA Arlington, VA 703-387-7136 www.mbda-systems.com MBDA recently demonstrated its Dual Mode Brimstone (DMB) missile on an MQ-9 Reaper Remotely Piloted Aircraft (RPA), scoring nine direct hits against a...
Briefs Manufacturing & Prototyping
Manufacturing Robotic Tools for Piping Inspection and Repair
Fleet piping systems are complex, space-constrained systems that are difficult to inspect using standard external inspection techniques. Pipe lagging, as well as limited space, makes...
Briefs Materials
Fabricating Porous Systems for Super-Dense Memories and Sensors
This project was dedicated to solving basic scientific issues and developing the scientific basis that underlies the improvement of super-dense memories, towards the terabit-per-square-inch goal and the engineering of chemical and biological sensors. Both applications rely on porous...
Briefs Photonics/Optics
Design and Fabrication of a Radio Frequency Grin Lens Using 3D Printing
Engineered electromagnetic materials and meta-materials have been researched to explore devices that enable access to electromagnetic properties that are not available in nature. This new class of devices can not only open the door to new functionality, but also be effectively...
Briefs Manufacturing & Prototyping
Preparing Carbon-Coated Current Collectors for High-Power Lithium-Ion Secondary Batteries
Achieving high-power capability of a battery requires minimizing the overall resistance of the electrochemical system. For lithium-ion batteries, much...
Technology Update Defense
Enabling high-strength composites to reach their full potential
The use of composite materials for construction of aerospace components began in the early 1980s and is now the material of choice for commercial and military airframe designers....
Technology Update Software
Designing quieter aircraft via acoustic simulation
Greater fuel efficiency and low emission requirements have grown into such an urgent imperative in aircraft design that it often overshadows an equally significant factor in air travel—noise.
Articles Defense
Navigating Regulatory Compliance for UAV Electronics Development
Unmanned Aerial Vehicles (UAV) deliver sophisticated capabilities with tremendous cost advantage over traditional methods. While this technology has evolved from military...
Articles Robotics, Automation & Control
Simulating Lightweight Vehicles Operating on Discrete Terrain
Engineers increasingly rely on simulation to augment and, in some cases, replace costly and time consuming experimental work. However, current simulation capabilities are sometimes...
Articles Defense
UUV Developments for Defense and Commercial Applications
Autonomous Undersea Vehicles (AUVs), also commonly referred to as Unmanned Undersea Vehicles (UUVs), have a history dating back to 1957 with the Special Purpose Underwater Research...
Articles Aerospace
The Evolution of Tactical Robots
The lessons of yesterday and today are driving tomorrow’s robotic programs. A revolution in Unmanned Ground Vehicles (UGVs) is taking place today that focuses on formalizing the permanent integration of ground...
Articles Aerospace
Next-Generation Antenna Design
Materials and Processes Enable New Possibilities for Unmanned Systems Command & Control Unmanned vehicles are finding increasing usage in military engagements, not only for aerial applications but also for...
Top Stories
INSIDERDefense
New 3D-Printable Nanocomposite Prevents Overheating in Military Electronics
Technology ReportSoftware
Talking SDVs and Zonal Architecture with TE Connectivity
NewsDesign
2026 Nissan Sentra Review: Putting the Pieces Together
INSIDERDesign
New Defense Department Program Seeks 300,000 Drones From Industry by 2027
INSIDERDefense
Anduril Completes First Semi-Autonomous Flight of CCA Prototype
INSIDERDefense
Webcasts
Transportation
Hydrogen Engines Are Heating Up for Heavy Duty
Manufacturing & Prototyping
SAE Automotive Podcast: Solid-State Batteries
Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
Automotive
Optimizing Production Processes with the Virtual Twin
