Latest Stories
Products Defense
Inductance-to-Digital Converter
Texas Instruments (Dallas, TX) unveiled an inductance-to-digital converter (LDC), a new data converter category that uses coils and springs as inductive sensors. Inductive sensing measures the position, motion,...
Products Defense
COTS Benchtop SDSI
The LibertyGT™ 1200B from RADX Technologies (San Diego, CA) combines RADX real-time measurement science software and firmware with NI PXI modules and NI LabVIEW system design software. The 1200B, a programmable benchtop...
Products Defense
Thermoelectric Air Conditioners
TECA Corporation (Chicago, IL) offers a flush-mounted thermoelectric air conditioner. For enclosures with limited space, flush-mounted air conditioners provide cooling without physical intrusion into the...
Products Defense
Printer Interface Unit
Sabtech (Yorba Linda, CA) has announced its new Printer Interface Unit™ (PIU). The technology allows any commercial off-the-shelf (COTS) printer to be used in place of a militarized PT-540 or compatible printer....
Products Defense
Optical Backplane Interconnect System
TE Connectivity (Harrisburg, PA) has released the new VITA 66.1 Ruggedized Optical Backplane interconnect system. The optical system is offered in both a receptacle (backplane) and mating plug...
Products Aerospace
Graphics Display Module
Curtiss-Wright Controls Defense Solutions (Ashburn, VA) has introduced a new embedded graphics module, the VPX3-716 3U OpenVPX™ six-head graphics display card. The module is designed for use on deployed airborne and...
Products Aerospace
Rackmount Recorders
Pentek (Upper Saddle River, NJ) has introduced the Model RTR 2728 rugged portable and the Model RTR 2748 rugged rackmount recorders. SSD (solid state drive) storage technology achieves aggregate recording and playback rates...
Products Defense
Interconnect Solutions
Molex (Lisle, IL) manufactures a variety of interconnect solutions for the aerospace and defense industry. Their high performance cable assemblies include a range of RF/Microwave cable assemblies utilizing Temp-Flex®...
Technology Update Defense
Automated drilling machine takes the burr out of fuselage joint
More than 1200 large-diameter (up to ¾-in) holes must be drilled into titanium/ carbon stacks for the side-of-body joint on a particular Boeing commercial aircraft fuselage. This...
Technology Update Defense
Redesign of composite parts for structural integrity
In the case of composite materials, material properties are vastly dependent on the manufacturing process. While shifting the manufacturing process of a composite part from preimpregnated to...
Products Aerospace
Shielded twisted pair cables
W. L. Gore & Associates’ Shielded Twisted Pair Cables reduce weight while maintaining reliable signal integrity. The cables meet ANSI/NEMA WC27500 standards for aerospace and industrial electrical cable, type...
Products Aerospace
Atomic force microscopy imaging
Asylum Research’s blueDrive photothermal excitation is available on its Cypher atomic force microscopes. blueDrive makes tapping mode imaging simple, stable, and accurate. It replaces the conventional piezoacoustic excitation mechanism, instead using a blue laser to directly excite the AFM cantilever...
Products Aerospace
Two-component electrically conductive epoxy
Two-component electrically conductive epoxy Made with silver-coated nickel filler, Master Bond EP79FL is a two-part, electrically conductive epoxy for bonding, sealing, and coating applications. It has a low-volume resistivity of less than 0.005 ohm-cm and is suitable for applications in the electronic,...
Products Aerospace
Custom dial face designs
Palmer Wahl Instrumentation Group's custom dial faces—its BiMetal and Direct Drive Dial thermometers, as well as its pressure gauges with screw-on bezels—may be customized, no matter the dial size. Customers may submit their own ideas and artwork, or they may work with the firm’s in-house engineering services to...
News Aerospace
Hybrid copter is first of its kind
Regulatory authorities in Germany decided to develop a new aircraft category called volocopter to accommodate the new 18-motor VC200. Read more at http://articles.sae.org/12585.
News Defense
Canadian researchers employ recycled carbon-fiber mats to produce thermoset composites
Carbon-fiber-reinforced thermoset composites continue to be difficult to recycle, as they are a complex mixture of different materials such as thermosetting polymers, carbon fibers, and fillers. Researchers from the Universite Du Quebec at Montreal, Bell...
News Defense
Overcoming design challenges of next-generation UASs
Next-generation unmanned air systems will require more performance and must integrate increasing capabilities for guidance control, weaponry, and surveillance—all in a very limited space. Read more at http://articles.sae.org/12546.
News Aerospace
Heated air technology helps optimize CFRP assembly
Assembly of large and complex carbon-fiber-reinforced plastic (CFRP) components requires the use of liquid resin-based materials for applications such as shimming and aerodynamic sealing. These materials generally require curing times up to 12 h; heated air technology can reduce that time to 2 h....
News Aerospace
A holistic approach to aircraft assembly
It is the "automation and tooling partner" who offers a performance-based and advanced manufacturing systems integration approach that offers the next step-change, say Bombardier Aerospace and AIP Aerospace Odyssey. Read more at http://articles.sae.org/12568.
Briefs Aerospace
Power Management for the Electric Taxiing System Incorporating the More Electric Architecture
With airlines increasingly directing their attention to operating costs and environmental initiatives, the More Electric Architecture for Aircraft and...
Briefs Physical Sciences
Simultaneous Vibration Suppression and Energy Harvesting
The goal of this work was to investigate the concept of using harvested energy to directly control the vibration response of flexible aerospace systems. Small, lightweight, flexible micro...
Briefs Physical Sciences
Cascading Failures in Coupled Distributed Power Grids and Communication Networks
Emerging distributed power grid systems will integrate tightly coupled networks, namely a power grid and a communication network, to provide distributed power monitoring and control. While distributing power monitoring and control away from a central site enhances the...
News Energy
Johnson Controls and Lawrence Tech Team on Batteries
Battery behemoth Johnson Controls and Lawrence Technological University in Southfield, MI, announced Jan. 29 that they will team to identify and validate new energy-storage technologies...
News Automotive
Dana Inaugurates Tech Center in India
Dana Holding Corp. on Jan. 28 dedicated an 8000-m² (86,000-ft²) technology center in Pune, India. Its 240-plus engineers there do work for OEMs in the light-vehicle, commercial-vehicle, and...
News Automotive
Study Says EV Charging Equipment Sales to Surge
Global sales of plug-in vehicles (PEVs) rose by more than 55% in 2013, and the market is expected to continue to grow at a steady pace over the next nine years, according to a recent report by...
News Green Design & Manufacturing
Oiling the Way to Greater EV Efficiency
Lubricant performance may not appear to be a salient challenge for EV operation even when it comes to the achievement of world electric speed records and on-track e-racecars. Not only is there no...
News Automotive
India Will Be First to See Datsun Future Design Vision
Nissan’s Datsun unit on Jan. 22 released a sketch of a concept car, saying it “represents a possible direction for the future expansion of Datsun’s model lineup for up-and-coming...
Top Stories
INSIDERLighting Technology
Using Ultrabright X-Rays to Test Materials for Ultrafast Aircraft
INSIDERManufacturing & Prototyping
New 3D-Printable Nanocomposite Prevents Overheating in Military Electronics
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
Technology ReportAR/AI
Talking SDVs and Zonal Architecture with TE Connectivity
INSIDERManufacturing & Prototyping
New Defense Department Program Seeks 300,000 Drones From Industry by 2027
INSIDERAerospace
Anduril Completes First Semi-Autonomous Flight of CCA Prototype
Webcasts
Test & Measurement
SAE Automotive Engineering Podcast: Additive Manufacturing
Information Technology
A New Approach to Manufacturing Machine Connectivity for the Air Force
Automotive
Optimizing Production Processes with the Virtual Twin
Power
EV and Battery Thermal Management Strategies
Manufacturing & Prototyping
How Packet Digital Is Scaling Domestic Drone Battery Manufacturing
Automotive
Advancements in Zinc Die Casting Technology & Alloys for Next-Generation...







