Latest Stories
Product Briefs Software
Savant and EMIT Simulation Software
The latest release of ANSYS' Savant and EMIT software gives engineers the power to design and predict the performance of installed antenna and radio frequency (RF) environments quickly and more accurately...
Product Briefs RF & Microwave Electronics
Vin Dc/dc Controller
Texas Instruments’ 2.2-MHz, dual-channel synchronous buck converter offers a unique set of features designed to significantly reduce electromagnetic interference and high-frequency noise in high-voltage dc/dc step-down...
News Automotive
Altair Names 2016’s Lightweight Standouts
The auto industry’s annual award program devoted exclusively to vehicle mass-reduction innovations recently named General Motors' Cadillac CT6 and ContiTech’s polyamide crossbeam as winners of...
Articles Design
Lightweighting: WHAT’S NEXT?
Are there any automakers who haven’t yet put at least one new model through the weight-reduction wringer? Vehicle mass efficiency has joined the vanguard of product development where every gram lost is...
Product Briefs Manufacturing & Prototyping
Probing Software Package
Renishaw offers an enhanced probing software package that automatically optimizes on-machine measurement cycles to minimize cycle time and maximize productivity. Inspection Plus with SupaTouch optimization uses...
Product Briefs Electronics & Computers
Kalman Filter Acceleration IP Core for ADAS
EnSilica offers the Kalman Filter acceleration IP core for use in situational awareness radar sensors for advanced driver assistance systems (ADAS), such as electronic stability-control systems,...
News Green Design & Manufacturing
Growth of FCVs and EVs Tied to Infrastructure
More hydrogen fueling stations in California and additional electric vehicle charging stations across the U.S. could reduce the range anxiety consumers have about driving these-advanced...
News Materials
Atmosphere Control System for Annealing
Linde LLC's Hydroflex atmosphere control system (ACS) is a solution for clean and bright oxide-free annealing of steel, stainless steel, copper, bronze or brass with high reliability and repeatability and is suitable for applications including automotive, aerospace and military components, construction and...
News Electronics & Computers
Blaupunkt Renews License Agreement for Infotainment Solutions in India
Car infotainment and audio accessory supplier Blaupunkt has renewed its license agreement for the brand in India. The agreement has been signed between brand holder Global Intellectual Property Development and Blaupunkt India Pvt. Ltd. for a tenure of five years, with an option...
News Automotive
‘Military-Grade’ Aluminum
When Teddy Roosevelt led his Rough Riders in their famous charge up San Juan Hill during the Spanish-American War, he was carrying a piece of leading-edge military technology: an aluminum canteen. Since that...
News Connectivity
Mahindra Launches E2o ElectriCity Car in the UK
Mahindra recently made its entry into the UK automotive market with the launch of the e2o electric city car. Designed specifically for easy urban commuting, the Mahindra e2o features several...
Q&A Green Design & Manufacturing
Driving the CAR Toward 54.5 Mpg
Chances are good that if you’re involved with automotive manufacturing strategy, you know Jay Baron. As President and CEO of the Center for Automotive Research (CAR) in Ann Arbor, Dr. Baron and his research...
News Software
Rolls-Royce Reveals a Vision of Its Future
“When it doesn’t exist, design it,” was Sir Henry Royce’s maxim aired some 100 years ago. Now it is being followed to the letter with the revealing in London of the Rolls-Royce Vision Next...
Articles Software
CAE's Next Leap Forward
The enormous complexity of today’s vehicles is well recognized. Not only are automakers turning to simulation as a cost-effective means to enhance physical test, it is becoming a fundamental tool in the design...
News Manufacturing & Prototyping
3D Printing Machines Can't Be Built Fast Enough, ORNL Expert Says
As Deposition Science and Technology Group Leader at Oak Ridge National Laboratory (ORNL), Ryan Dehoff facilitates the development of additive manufacturing of components,...
News Propulsion
Integration Can Simplify Motor Development Process
Texas Instruments aims to simplify the design process for the growing number of electric motors used in hybrids and in applications like electric power steering. TI recently unveiled a...
News Manufacturing & Prototyping
ZF Leverages Indian Operations
ZF has initiated the “Wind of Change” campaign to reinforce its supplier base in the Indian market. In an announcement on ZF India Supplier Day, the company said it aims to reach EUR100 million worth of...
News Manufacturing & Prototyping
GM Shines Brightest in Latest OEM-Supplier Relations Study
“The continuing challenge facing automakers is very simple: They need to understand the difference between process improvement and work relations improvement. Some OEMs don’t...
News Automotive
OEMs Expand Testing of FEV Variable-Compression Ratio Engine
Road testing of a new variable-compression ratio (VCR) combustion system in Europe has been “very successful to date” as OEMs validate the FEV-developed technology, reports...
News Test & Measurement
Mississippi State University's Car of the Future Features Novel Innovations
A rear-wheel-drive sports car’s estimated triple-digit mpg and predicted 5.7-s 0 to 60 mph (0 to 97 km/h) acceleration time are the prime performance cues...
Technology Report Software
Bolt EV Seat Design Cuts Weight, Delights Taller Passengers
Stepping into the back seat of Chevrolet’s 2017 Bolt EV, one attribute of the car is immediately evident: the designers and engineers didn’t neglect the outsized physical...
Product Briefs Automotive
Stanyl HGR1 Polyamide 46-Based Material
Based on Stanyl polyamide (PA) 46, Royal DSM’s new high performance Stanyl HGR1 reduces frictional torque in automobile engine timing systems. The new material will provide OEMs with a cost-effective...
Articles Manufacturing & Prototyping
Federal Lab Cost-Effectively Eliminates Diesel Idling to Condition Class 8 Sleeper Cabs
You see them at the side of roads, in parking lots and pull-off areas of highways—Class 8 over-the-road trucks with their diesel engines idling...
News Connectivity
OEMs and Tier 1s Prepare for China Uncertainty, Disruptions
As headwinds buffet China's economy, automotive OEMs and Tier 1s are expecting many changes in the near term. At the recent Global Automotive Forum in Chongqing, experts predicted...
News Propulsion
Nissan's New Direct-Injection V6 Muscles 2017 Pathfinder to 6000-Lb Towing Crown
The most significant mid-cycle revamp in the Nissan Pathfinder’s 30-year history provides the midsize SUV with a 6000 lb (2722 kg) towing capacity, a full...
News Propulsion
Volvo Bets on New PowerPulse, Not 48V, for Turbodiesel Boost Assist
Volvo is using a blast of compressed air to boost torque delivery and exorcise turbo "lag" of its new D5 diesel engine. It's a comparatively simple technology solution that...
News Automotive
China Shifts Focus to 'New Energy' Vehicles
Chinese planners are focusing on "new energy" vehicles (NEV) that don’t rely primarily on internal combustion engines to become a mainstay of its future automotive production and consumption....
News Software
Jaguar, Exa Say Simulation to Eliminate Prototypes by 2020
Finding the right ratio of "emphasis" (aka "compromise") between design and engineering priorities has long been part of the enduring magic behind the conception and creation of...
Top Stories
INSIDERDefense
New 3D-Printable Nanocomposite Prevents Overheating in Military Electronics
Technology ReportSoftware
Talking SDVs and Zonal Architecture with TE Connectivity
NewsDesign
2026 Nissan Sentra Review: Putting the Pieces Together
INSIDERDesign
New Defense Department Program Seeks 300,000 Drones From Industry by 2027
INSIDERDefense
Anduril Completes First Semi-Autonomous Flight of CCA Prototype
INSIDERDefense
Webcasts
Transportation
Hydrogen Engines Are Heating Up for Heavy Duty
Manufacturing & Prototyping
SAE Automotive Podcast: Solid-State Batteries
Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
Automotive
Optimizing Production Processes with the Virtual Twin
