Latest Stories

Application Briefs
Sensors/Data Acquisition

Nano-Unmanned Aerial Vehicle

FLIR SystemsWilsonville, OR503-498-3547www.flir.com/blackhornet.com FLIR Systems, Inc. was recently awarded a $2.6 million contract from the United States Army to deliver FLIR Black Hornet® Personal Reconnaissance...

Feature Image

Briefs
Aerospace

Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera

The concept of an imaging system that captures both spatial and spectral information has existed for a while. An example of one such imaging system that encodes both...

Feature Image

Briefs
Aerospace

Integrated Magneto-Optical Devices for On-Chip Photonic Systems

The magneto-optical (MO) oxide layer consists of (Bi,Y)3Fe5O12 or BiYIG, bismuth garnet. This material was selected because it has a better figure of merit than the CeYIG...

Feature Image

Briefs
Aerospace

Low Power Optical Phase Array Using Graphene on Silicon Photonics

Despite enormous advances in integrated photonics over the last decade, an efficient integrated phase delay remains to be demonstrated. This problem is fundamental – most...

Feature Image

Briefs
Photonics/Optics

Ultracompact, High-Speed Field-Effect Optical Modulators

The major goals of this research project included two parts. First, an ultracompact plasmonic electro-optical (EO) modulator was to be developed and investigated for efficient intensity...

Feature Image

Products
Sensors/Data Acquisition

New Products

Barometric Pressure Sensor Bosch Sensortec (Reutlingen, Germany) has introduced a new high performance barometric pressure MEMS sensor, the BMP388. The BMP388 delivers outstanding altitude stabilization in drones, where accurate...

Feature Image

Articles
Materials

Using Thermoplastics in Aerospace Applications

In August 2017, Qantas Airlines laid down the challenge to both Boeing and Airbus to offer an aircraft that can cross one of aviation's “last frontiers.” That “last frontier” was an...

Feature Image

Articles
RF & Microwave Electronics

Communicating from Space: The Front End of Multiscale Modeling

As satellites and astronauts travel further out in space, the more communication challenges they face. NASA launched the InSight Mission on May 5, 2018 from Vandenberg Air Force...

Feature Image

Articles
Software

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV)

Drone aircraft and their uses have been evolving quickly, supported by a great deal of ongoing research. One area of increasing interest is the decoy drone, designed to mimic the radar...

Feature Image

Articles
Electronics & Computers

Using Turbine Flow Meters for Aerospace Test and Measurement Applications

Turbine flow meters have long been a preferred technology for obtaining precise measurements of fluid flow in the aerospace industry. In addition to their high accuracy,...

Feature Image

Articles
Software

In-Flight Real-Time Avionics Adaptation

Avionics is a very restricting domain for obvious safety reasons. Along with miniaturization comes the idea of integration. More functionality on one spot requires a good management of privacy and...

Feature Image

Articles
Photonics/Optics

Laser-Based System Could Expand Space-to-Ground Communication

A new research project announced recently as a collaboration between the Georgia Institute of Technology and satellite communications provider Xenesis could help open the bottleneck...

Feature Image

Application Briefs
Sensors/Data Acquisition

Maritime Unmanned Aircraft System

AeroVironment, Inc.Monrovia, CA626-357-9983www.avinc.com AeroVironment, Inc., a specialist in unmanned aircraft systems (UAS) for both defense and commercial applications, and ESG Elektroniksystem- und...

Feature Image

Application Briefs
Aerospace

3D Printed Spacecraft Parts

Stratasys Ltd.Eden Prairie, MN952-937-3000www.stratasys.com/aerospace Phoenix Analysis and DesignTechnologies (PADT) Tempe, AZ1-800-293-PADTwww.padtinc.com Stratasys Ltd., a company that specializes in applied...

Feature Image

Application Briefs
Manufacturing & Prototyping

Diesel Frigate Engines

Fairbanks MorseBeloit, WI1-800-356-6955www.fairbanksmorse.com Fairbanks Morse - an EnPro Industries company - has been awarded a contract to deliver eight FM | Colt-Pielstick diesel engines to power four frigates for the...

Feature Image

Application Briefs
Robotics, Automation & Control

Optical Seeker for Munitions Systems

BAE SystemsNashua, NH603-885-4321www.baesystems.com The U.S. Defense Advanced Research Projects Agency (DARPA), through the U.S. Air Force Research Laboratory, has awarded BAE Systems a $13.1 million...

Feature Image

Briefs
Test & Measurement

Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison

As the medical community learns more about brain injury, the importance of blunt impact mitigation becomes more apparent. As such, it is critical to make sure that research labs...

Feature Image

Briefs
Electronics & Computers

Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section

The objective of this research was to hydraulically pressurize the internal diameter of one 102mm Polymer Matrix Composite (PMC) over-wrapped cylinder up to 25,000 pounds per...

Feature Image

Briefs
Data Acquisition

Permeation Tests on Polypropylene Fiber Materials

The Toxic Industrial Chemical/Toxic Industrial Material (TIC/TIM) Task Force MFR#1 published in February 2009 focuses on inhalation hazards in an operational environment and provides a list of...

Feature Image

Articles
Materials

Meeting Environmental Objectives and Regulations

Gone are the days when the impact of products on the environment or human health were optional business concerns. Regulatory constraints on materials and chemicals are increasing, and many...

Feature Image

Articles
Software

Using the Full CAD-CAM-CNC Process Chain in Ultrasonic and Conventional 5-Axis Machining

DMG MORI manufactures a wide variety of conventional chip-cutting and ultrasonic machining centers for OEMs and production job shops serving the aerospace...

Feature Image

Products
Data Acquisition

New Products

RF and Microwave Power Amplifier Accessories Pasternack (Irvine, CA) has released a new series of RF and microwave power amplifier accessories that includes heat sinks, heat sinks with cooling fans, and power control cable...

Feature Image

Articles
Aerospace

Improving Component Life in Abrasive, Corrosive Aerospace Environments

In industries such as aerospace, characterized by extreme operating environments that push materials and components to the edge of their design capabilities, companies are...

Feature Image

Articles
Aerospace

Beyond VMEbus A New Concept

Deployability and life-cycle management of large and disparate collections of weapons, combat and C4ISR computing systems is one of the most critical challenges facing the Department of Defense today. Numerous...

Feature Image

Articles
Photonics/Optics

Taming the Thermal Behavior of Solid-State Military Lasers

Laser diodes and laser diode arrays (LDAs) are widely used throughout military systems, for sighting and range finding, but also at high power levels as offensive and defensive weapons....

Feature Image

Articles
Test & Measurement

Surviving the Challenge of Thermal Design in Aerospace Electronics

The aerospace sector places some uniquely challenging demands on electronics designers. For a start, the environments that the electronics are exposed to are much harsher than...

Feature Image

Articles
Aerospace

Validation of Ubiquitous 2D Radar

Seastema SpA, a company owned by Fincantieri (Genova, Italy), designs, develops, and supplies integrated automation systems for different areas of the marine industry. The company established an Innovation...

Feature Image

Articles
Test & Measurement

New Pulse Analysis Techniques for Radar and EW

Pulsed signals are widespread in radar and other electronic warfare (EW) applications, and they must be accurately measured for manufacturing, design of countermeasures, and threat assessment;...

Feature Image

Articles
Materials

How Additive Manufacturing is Changing the Aerospace Industry

Additive manufacturing was invented more than 30 years ago and, from small beginnings in prototyping, has developed and grown into a $6 billion industry. While additive manufacturing...

Feature Image