Latest Stories
News Electronics & Computers
Aluminum Electrolytic Capacitor
A new line of axial-lead aluminum electrolytic capacitors from Cornell Dubilier Electronics, Inc. (Liberty, SC) is available for applications that require very high-performance under all operating conditions....
Product Briefs RF & Microwave Electronics
Advanced Motor Control Tool
Microchip Technology Inc.'s (Chandler, AZ) advanced motor control software plug-in for MPLAB X Integrated Development Environment (IDE) features auto tuning and self-commissioning capability. The plug-in, called...
Product Briefs Automotive
Wobble Plate Compressor
An anchor product for T/CCI Manufacturing (Decatur, IL), the 7H wobble plate compressor is claimed to be the leading design in the industry for the heavy-duty truck and construction sector. According to the company, its...
Product Briefs Motion Control
Sensor-Controlled Air Springs
Equipped with Continental sensor technology, the height of ContiTech’s (Auburn Hills, MI) air springs can now be adjusted electronically, the internal pressure monitored and the internal temperature measured....
Articles Electronics & Computers
Longer, Lower, Wider Fashion Reaches Formula One for 2017
American Formula One viewers squinting through bleary eyes at the live early-morning broadcasts from Europe have noticed changes to the sophisticated race cars for the 2017: they are...
Articles RF & Microwave Electronics
Artificial Intelligence Becomes a Reality
The soaring role of software has already fostered many changes for automakers, but those transitions may pale in comparison to the challenges expected when artificial intelligence is employed in the...
Articles AR/AI
AI Digs Deeper
Artificial Intelligence has been around since the 1950s, but in many ways it’s still an emerging technology. Large systems for years have utilized various forms of AI, but the technology only now is becoming viable in mass...
News Propulsion
Meeting the Ignition Challenges of Next-Gen Off-Highway Gaseous-Fueled Engines
Environmental pressures and total cost of ownership are beginning to change the types of engines used for off-highway applications, and this trend is likely to...
Product Briefs Electronics & Computers
DEUTSCH Connector
The newly redesigned 2-pole DEUTSCH connector (MDC06-2S) from Murrelektronik, Inc. (Suwanee, GA) is an extremely compact connector—18-mm (0.71-in) long when plugged in—making it easier than ever to make connections, even in confined spaces. Pre-wired and 100% electrically tested, the DEUTSCH connector requires no work in the...
News Materials
High Temperature, Electrically Conductive Adhesive
The EO-98HT from EpoxySet (Lincoln, RI) is electrically conductive epoxy for electrical circuits.
News RF & Microwave Electronics
Lidar Heats up as Sensor Demand Rises
Many autonomous-driving development plans call for deploying a handful of solid-state Lidar sensors on each vehicle, but the Lidar modules used for today’s prototype vehicles all are mechanical...
News RF & Microwave Electronics
Magnetic Multiturn Encoder Technology
POSIHALL is ASM Sensors' (Elmhurst, IL) new magnetic multiturn encoder technology. According to the company, the new encoder technology measures true-absolute and is the robust alternative to optical...
Product Briefs Electronics & Computers
J1939 CAN Bus Splitter
The CAN bus splitter from Trombetta (Milwaukee, WI) provides a cost-effective and space-efficient way of connecting multiple devices to the J1939 CAN bus. Featuring a small footprint, this module reduces cost by eliminating Y adapters and extra harnesses typically used to provide additional connections to the bus. The module...
News RF & Microwave Electronics
Leveraging Connectivity to Drive Business
Connectivity in regard to hydraulic systems involves the utilization of “smart” components, which work together and communicate with one another on a common system. These components can include...
Executive Viewpoints Propulsion
Making Sure Next-Gen Diesels Are Right for the Next Generation of OEM Equipment
Today, OEMs are placing a greater emphasis on building long-term customer relationships that extend well beyond the original sale of the machine. Intense global...
Executive Viewpoints Green Design & Manufacturing
An Alternative Approach: FPT Industrial Invests in Industrial Engines Running on Natural Gas
The demand for greater environmental sustainability in urban areas coupled with the upcoming reforms that are expected to drastically reduce limits...
News Propulsion
Future Engine Emissions Reduction Strategies
Demands on off-highway vehicles and trucks today are exceedingly complex. Equipment must be more environmentally friendly, work in a more aggressive environment, run longer hours and rely upon...
Articles Sensors/Data Acquisition
Fast-Tracking Autonomous Vehicles with Simulation
Artificial intelligence developments are set to fundamentally transform mobility, whether it is mobility of weapon payloads, supply deliveries, urban commuters, warehouse goods, delivery...
Articles Aerospace
Developing a Multi-Modal UGV Robot Control Interface
Unmanned ground vehicles (UGV) are currently being used or developed for operational maneuvers (e.g., reconnaissance and IED defeat), maneuver support (e.g., route clearance), and sustainment...
Articles Energy
Solar Powering UAVs
One of the largest problems facing the aerospace industry involves size, weight, and power (SWaP) analysis and the increasing size of payloads with typically a finite amount of power to drive ever more demanding systems....
Articles Unmanned Systems
Deploying COTS Subsystems in UUVs
In December, 2016 the newest class of unmanned vehicles, Unmanned Underwater Vehicles (UUV) made international headlines after China, in an unprecedented act, seized an unclassified “ocean glider” operated...
Articles Defense
Interoperability Standards Pave the Way for Modular Robotic Manipulators
Unmanned vehicles have long been used by the military to handle situations characterized by the three Ds: dull, dirty, and dangerous. As the use of unmanned ground...
Articles Automotive
Innovations for Lightweighting: FCA slashes Pacifica mass with magnesium, hot-stamped steel
For the past 20 years, the steel industry has parried the most aggressive thrusts of its aluminum competitors and outpaced them in real-world...
Briefs Robotics, Automation & Control
Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency
It has been established theoretically that self-propulsion of deformable bodies in ideal fluid can occur with a careful specification of...
Briefs Aerospace
Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers
Afuture vision of the use of autonomous and intelligent robots in dismounted military operations is for soldiers to interact with robots as teammates, much like...
Briefs Aerospace
A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation
ARL's Intelligent Systems Enterprise vision is to enable the teaming of autonomous intelligent...
Briefs Robotics, Automation & Control
Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings
The main objective of this research was to better understand the flow physics of aircraft wings undergoing highly unsteady maneuvers. Reduced-order models play a central role in this study, both to elucidate the overall dynamical mechanisms behind various flow...
Briefs Robotics, Automation & Control
The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines
The rapid expansion of the remotely piloted aircraft market includes an interest in 10 kg to 25 kg vehicles (Group 2) for monitoring, surveillance, and...
Top Stories
INSIDERDefense
New 3D-Printable Nanocomposite Prevents Overheating in Military Electronics
Technology ReportSoftware
Talking SDVs and Zonal Architecture with TE Connectivity
NewsDesign
2026 Nissan Sentra Review: Putting the Pieces Together
INSIDERDesign
New Defense Department Program Seeks 300,000 Drones From Industry by 2027
INSIDERDefense
Anduril Completes First Semi-Autonomous Flight of CCA Prototype
INSIDERDefense
Webcasts
Transportation
Hydrogen Engines Are Heating Up for Heavy Duty
Manufacturing & Prototyping
SAE Automotive Podcast: Solid-State Batteries
Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
Automotive
Optimizing Production Processes with the Virtual Twin



