Latest Stories
News RF & Microwave Electronics
FADA-CATEC Uses 3D Printing to Slim down the CHEOPS Satellite
The “CHaracterising ExOPlanets Satellite” (CHEOPS) – the first European Space Agency (ESA) scientific satellite to developed and manufactured in Spain – will launch in...
News Manned Systems
German Air Traffic Controllers Shift to Completely Remote Operations at Saarbrücken Airport
Yesterday, a Luxair regional airliner arriving at Saarbrücken Airport was the first aircraft remotely cleared for landing from the Deutsche...
News Test & Measurement
Logos Technologies Redkite Airborne, Wide-Area Sensor Takes Flight in the Netherlands
European government officials gained their first glimpse of Logos Technologies’ Redkite wide-area motion imagery (WAMI) sensor in operation, during a...
INSIDER Aerospace
Smart Skin Simplifies Spotting Strain in Aircraft
Thanks to one peculiar characteristic of carbon nanotubes, engineers will be able to measure the accumulated strain in an airplane over the entire surface or down to microscopic levels....
News Regulations/Standards
National Space Council Receives Report on Human Spaceflight in Low-Earth Orbit
As requested by the National Space Council; NASA, the Department of State, and the Department Commerce have submitted a report outlining future opportunities...
Technical Innovation Manufacturing & Prototyping
Mahle Keeps Fuel-cell Drive Components Cool and Clean
Diagnosis and monitoring of fuel cell stacks is critical to prevent damage and to control crucial input variables such as gas and air supply. Mahle’s Fuel Cell Monitor module has two microprocessors that process the signals from the fuel cell stack and provide feedback to the central control unit.
Application Briefs Communications
Missile Defense Battle Manager
Northrop Grumman CorporationFalls Church, VA703-280-2900www.northropgrumman.com The Northrop Grumman Corporation-developed Integrated Air and Missile Defense (IAMD) Battle Command System (IBCS) successfully...
Articles Aerospace
Metal Additive Manufacturing
Additive manufacturing (AM) – the process of building up solid layers of material to form a finished solid part — is an emerging and exciting technical discipline. Also referred to as “3D printing,” many...
Articles Test & Measurement
Cognitive Radio: The New Architecture of Space Communications
NASA spacecraft typically rely on human-controlled radio systems to communicate with Earth. As collection of space data increases, NASA looks to alternative radio technologies to...
Application Briefs Defense
Custom Flexible Shafts
S.S. White TechnologiesSt. Petersburg, FL727-626-2800www.sswhite.net S.S. White Technologies, a company that specializes in the design and manufacture of flexible shafts and related assemblies, is currently offering...
Application Briefs Mechanical & Fluid Systems
Compression Molding Press
Beckwood Press CompanyFenton, MO636-343-4100www.beckwood.com Beckwood Press Company, a company that specializes in the design and manufacturing of custom hydraulic presses, automation systems, and the Triform line of...
Articles Aerospace
Single Event Effects in High Altitude Aerospace Sensor Applications
There are many advantages to utilizing active electronics versus the passive systems often used in aircraft applications, such as pressure, temperature, and flow sensors. Some...
Briefs Materials
Microstructural and Mechanical Characterization of 2-D and 3-D SiC/SiNC Ceramic-Matrix Composites
The purpose of this endeavor was to investigate the effect of 3-D weave architecture on PIP-processed ceramic-matrix composites (CMC)....
Articles Robotics, Automation & Control
Testing Military Vehicle Steering Systems
Military vehicles play a vital role in protecting our society — and inevitably encounter many extreme conditions across their lifespan. From the varying weight, to the rough terrain, there is a lot...
Briefs Mechanical & Fluid Systems
Evaluation of Peel Ply Surface Preparation of Composite Surfaces for Secondary Bonding
Lightweight composite structures offer significant long-term cost-saving opportunities for the U.S. Army as replacements for traditional metal structures....
Briefs Energy
Enhanced Contacts for Inverted Metamorphic Multi-Junction Solar Cells Using Carbon Nanotube Metal Matrix Composites
In order to address issues related to mechanical and vibrational stresses that are commonly experienced in mounting, launch,...
Articles Electronics & Computers
Fiber-Reinforced Thermoplastic Composites
Reinforcing polymers with strong/stiff fibers is nothing new. Such materials have been used pretty much since aircraft were first created. In those pioneering days, wings were reinforced with woven...
Products Photonics/Optics
New Products
Round TFT LCD Displays Data Image (Winter Park, FL) has announced new round TFT LCD color displays in two sizes: 3" and 4.2" in diameter. They can be used as digital avionics, power meters, speedometers, rpm gauges, temperature...
Briefs Software
Reusable Rapid Prototyped Blunt-Impact Simulator
Rapid prototyping (RP) is the term most commonly used to describe additive manufacturing technologies. An additive manufacturing technology is any manufacturing process that fabricates a part by...
Application Briefs Test & Measurement
Biological Threat Detectors
FLIR Systems, Inc.Wilsonville, OR1-800-254-0630www.flir.com/IBAC2 FLIR Systems, Inc. announced recently that it has received a delivery order for FLIR IBAC™ 2 biological agent detector systems to support the United...
Application Briefs Aerospace
Laser Guided Rocket System
Arnold DefenseSt. Louis, MO636-575-9190www.arnolddefense.com Arnold Defense, the St Louis based international manufacturer and supplier of 2.75-inch rocket launchers, recently announced the commencement of initial...
Technical Innovation Software
Siemens Improves Optimization for Engine Development
Adding to its portfolio of NX CAD, Teamcenter, and simulation tools, Siemens in recent years acquired combustion simulation capabilities through Simcenter STAR-CCM+, 1D system simulation with Simcenter Amesim, and multidomain optimization with HEEDS.
Original Equipment Transportation
Iveco Pursues Natural Gas in Stralis NP Models
For long-haul efficiency, Iveco believes CNG- and LNG-powered trucks, such as this Stralis NP LNG demonstrator, provide a low-emissions solution without compromising range or load-carrying ability.
News RF & Microwave Electronics
A Chat with 2019 Toyota RAV4 Chief Engineer Yoshikazu Saeki
Yoshikazu Saeki (above) is the chief engineer for the Toyota RAV4 and Toyota Highlander. Saeki (54) joined the company in 1987 as a suspension engineer on the Land Cruiser team...
Articles Power
Delphi Injects Life into Diesel
Delphi Technologies is predicting a period of unprecedented change for the truck and off-highway powertrain markets. However, chief technology officer Mary Gustanski reports that the company is more than...
Articles Test & Measurement
Applying Augmented Reality Technology to Aerospace Manufacturing
New and powerful projection based augmented reality (AR) technology is transforming the way products — ranging from turbine engines to pacemakers — are made, while...
Articles Aerospace
Lightweighting Parts Using 3D Metal Printing
Metal additive manufacturing (3D printing), also known as Direct Metal Laser Sintering (DMLS) or Powder Bed Fusion (PBF), is changing the way metal parts are designed and produced. New software,...
Top Stories
INSIDERManufacturing & Prototyping
How Airbus is Using w-DED to 3D Print Larger Titanium Airplane Parts
NewsAutomotive
Microvision Aquires Luminar, Plans Relationship Restoration, Multi-industry Push
INSIDERAerospace
A Next Generation Helmet System for Navy Pilots
INSIDERDesign
New Raytheon and Lockheed Martin Agreements Expand Missile Defense Production
ArticlesAR/AI
CES 2026: Bosch is Ready to Bring AI to Your (Likely ICE-powered) Vehicle
Road ReadyDesign
Webcasts
Semiconductors & ICs
Advantages of Smart Power Distribution Unit Design for Automotive...
Unmanned Systems
Quiet, Please: NVH Improvement Opportunities in the Early Design...
Electronics & Computers
Cooling a New Generation of Aerospace and Defense Embedded...
Power
Battery Abuse Testing: Pushing to Failure
AR/AI
A FREE Two-Day Event Dedicated to Connected Mobility
