Latest Stories
INSIDER Manned Systems
Marines Receive First Combat and Control Variant of Amphibious Combat Vehicle
BAE Systems delivered the first Amphibious Combat Vehicle Command and Control (ACV-C) variant under the full-rate production contract to the U.S. Marine Corps....
INSIDER Mechanical & Fluid Systems
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines
The Federal Aviation Administration is expanding its investigation into what caused the recent Alaska Airlines Flight 1282 incident to Boeing's manufacturing...
INSIDER Materials
How the US Navy Uses Organic Manufacturing to Combat Supply Chain Constraints
When supply chain constraints make it challenging to source parts for aircraft maintained at Fleet Readiness Center East (FRCE), the depot’s organic...
INSIDER Manufacturing & Prototyping
Army Launches $50 Million Advanced Manufacturing Initiative for Aviation and Weapon Systems
The U.S. Army has awarded a $50 million three-year research project to Auburn University to understand how new manufacturing materials and methods...
Application Briefs Defense
Autonomous Navigation Kits
Defense Innovation UnitWashington D.C. info@DIU.milwww.DIU.mil The Department of Defense (DoD) operates a vast array of military vehicles crucial for both sustainment and combat operations. Traditionally, these...
Application Briefs Materials
Cold Spray Technology
Naval Air Systems CommandNaval Air Station North Island, CA(619) 545-3415www.navair.navy.mil In the realm of naval aviation maintenance, repair, and overhaul, a transformative technology is taking flight. At the heart...
INSIDER Aerospace
Peregrine Spacecraft Suffers Propellant Leak After Successful Rocket Launch
Astrobotic's Peregrine lunar lander suffered a failure within its propulsion system after deploying from the United Launch Alliance (ULA) Vulcan Centaur rocket on...
INSIDER Defense
Bombardier to Start Building New Army HADES Prototype Spy Plane
Bombardier Defense has received a new contract award to develop a prototype spy plane for the Army’s High Accuracy Detection and Exploitation System (HADES) program. Under...
INSIDER Mechanical & Fluid Systems
New DARPA X-Plane Will Have No Moving Control Surfaces
Aurora Flight Sciences has begun manufacturing work on a new X-plane for the Defense Advanced Research Projects Agency’s (DARPA) Control of Revolutionary Aircraft with Novel Effectors...
INSIDER Materials
Boeing 737 MAX 9 Fleet Grounded Following In-Flight Loss of Cabin Door Plug
The Federal Aviation Administration has grounded 171 in-service Boeing 737 MAX 9s following an Alaska Airlines flight involving the aircraft type last week....
INSIDER Defense
New Report Finds Need for Defense Laboratories to Improve Quantum Workforce Planning
Quantum technologies build on quantum physics to process and communicate information in ways that existing technologies can't. Nations leading quantum...
INSIDER Manufacturing & Prototyping
New Mobile Rocket-Launching System to Support Counter UAS Operations in Ukraine
The U.S. Navy will complete the delivery of a new rocket-launching counter unmanned aircraft system (CUAS) weapon system to Ukraine this month. The new...
INSIDER Defense
Army Receives First Next Generation Precision Strike Missile
The U.S. Army has received the first delivery of its new Precision Strike Missiles (PrSM) from Lockheed Martin following the completion of production qualification testing at...
INSIDER Defense
DARPA-Funded Research Leads to Quantum Computing Breakthrough
A team of researchers working on the Defense Advanced Research Project Agency’s (DARPA’s) Optimization with Noisy Intermediate-Scale Quantum devices (ONISQ) program has...
INSIDER Wearables
DoD Starts Prototyping Commercial Lithium Batteries for Aviation, Ground Vehicle and Soldier Power
Under the new Family of Advanced Standard Batteries (FAStBat) project, the Defense Innovation Unit (DIU) and several other agencies are funding...
Articles Test & Measurement
Ensure Aerospace Composite Quality with Force Measurement, Material Testing
Force measurement and material testing is an essential process for product designers and manufacturers to ensure part integrity, and to gain insightful data for creating the highest quality composite components.
Articles Materials
How Distributed Metal Additive Manufacturing Can Add a Surge to Military Supplier Strategies
By embracing advanced metal additive manufacturing, ammunition and systems manufacturers can enhance their responsiveness to changing demands and better secure their supply chains against potential threats.
Products Electronics & Computers
New Products
See the new products, including the SST ESF3 third-generation embedded SuperFlash technology NVM solution in the GF 28SLPe foundry process; General Micro Systems' new rugged display using open-standard Thunderbolt™ 4 technology; Rohde & Schwarz' RF test and measurement solutions; and more.
Application Briefs Aerospace
Air Force Receives First Joby eVTOL
The U.S. Air Force received its first electric vertical takeoff and landing aircraft from Joby Aviation six months ahead of the expected 2024 delivery date. The delivery was completed during a September ceremony at Edwards Air Force Base.
Application Briefs Aerospace
New CFM56 High Pressure Turbine Blades
CFM International has introduced a new design for High-Pressure Turbine blades featured on the CFM56 engine, one of the most widely used engines on thousands of in-service commercial and military aircraft, including the Airbus A320 and the Next Generation Boeing 737.
Application Briefs Test & Measurement
Quantum Sensing Atomic Gyroscope
The Defense Science Board identified three areas of quantum technology that will be most relevant to the DoD's technological superiority: sensing, encryption, and communications.
Application Briefs Aerospace
RS-25 Rocket Engines
Aerojet Rocketdyne, an L3Harris Technologies company, recently completed installation of all four RS-25 main engines on the core stage of NASA’s second Space Launch System (SLS) exploration rocket, binding them to a common destiny: launching humans beyond low Earth orbit for the first time in more than five decades.
Briefs Manufacturing & Prototyping
Modeling and Experimenting with 2D Materials for CMOS Type Devices and Digital Integrated Circuits
Two-dimensional transition metal dichalcogenides have been proposed as novel optoelectronic materials for space applications due to their relatively light weight. MoS2 has been shown to have excellent semiconducting and photonic properties. Here, we report the effect of gamma irradiation on the structural and optical properties of a monolayer of MoS2.
Briefs Aerospace
Assessment of Noncommercial Icing Prediction Capabilities for Army Applications
Historically, smaller Unmanned Aerial Systems (UAS), such as Class 2 RQ-1B Raven and Class 3 RQ-7Bv2 Shadow, have been restricted to not be approved to fly in icing conditions under the assumption that any ice accretion would cause an unacceptable risk of loss of the aircraft.
Briefs Materials
Composite Repair Engineering Case Studies for U.S. Army Aerostructures
As technologies develop, aircraft mature, and strides are made in advanced materials development and analysis, aircraft have increased use of advanced composites within the aerostructure. These advanced materials are now being used in highly loaded structures, including aerodynamic profiles.
Briefs Green Design & Manufacturing
Towards Sustainable Recycling of Epoxy-Based Polymers: Approaches and Challenges of Epoxy Biodegradation
Epoxy polymers are widely used in various industries. However, the disposal of epoxy polymers and composites thereof has become a significant concern due to their recalcitrant nature and the adverse environmental effects caused by traditional recycling methods.
Articles RF & Microwave Electronics
Physicists Develop a New Type of Antenna
This research and demonstration presents a simple technique for a remote Rydberg-atom-based RF sensor, which was verified for distances of up to 30 m between the passive sensing unit and the base station — currently limited by the length of the hallway used in the demonstration.
Articles Weapons Systems
Key Measurements to Maintain Performance of Critical Electronic Systems on Military Aircraft and Warships
Wireless technology is a critical element of the modern battlefield, making accurate and consistent transmissions of high-speed data essential for mission success. Ensuring wireless system performance has additional challenges when implemented on warships and aircraft.
Top Stories
INSIDERManufacturing & Prototyping
How Airbus is Using w-DED to 3D Print Larger Titanium Airplane Parts
INSIDERManned Systems
FAA to Replace Aging Network of Ground-Based Radars
NewsTransportation
CES 2026: Bosch is Ready to Bring AI to Your (Likely ICE-powered) Vehicle
NewsSoftware
Accelerating Down the Road to Autonomy
EditorialDesign
DarkSky One Wants to Make the World a Darker Place
INSIDERMaterials
Can This Self-Healing Composite Make Airplane and Spacecraft Components Last...
Webcasts
Defense
How Sift's Unified Observability Platform Accelerates Drone Innovation
Automotive
E/E Architecture Redefined: Building Smarter, Safer, and Scalable...
Power
Hydrogen Engines Are Heating Up for Heavy Duty
Electronics & Computers
Advantages of Smart Power Distribution Unit Design for Automotive...
Unmanned Systems
Quiet, Please: NVH Improvement Opportunities in the Early Design...




