Latest Stories
News Defense
USAF Take Rates Continue to Drop Despite Retainment Bonuses
Despite the May 2018 decision to increase the cap for pilot retainment bonuses – or “take rates” – the United States Air Force (USAF) is still suffering from a major pilot...
News Propulsion
Mitsubishi Heavy Industries Aero Engines Completes Assembly of First Pratt & Whitney GTF PW1200G Engine
The first Pratt & Whitney PW1200G Geared Turbofan (GTF) engine assembly was completed at the Mitsubishi Heavy Industries Aero...
News Energy
High-Altitude Pseudo Satellites: New Battle for Inner Space, Part II
A new development applicable to the production of the Airbus Zephyr lightweight, solar unmanned aircraft is the Airbus Spider radar payload, a novel commercial...
News Photonics/Optics
High-Altitude Pseudo Satellites: New Battle for Inner Space, Part I
Farnborough International Airshow 2018 coincided with the opening of the world’s first serial HAPS assembly line by Airbus Defence and Space, with the Farnborough-based...
News Manned Systems
Latest Boeing Business Jets 777X VIP Cabin Concept Debuts at MEBAA in Dubai
Pulling out all stops, Boeing Business Jets debuted the “Shaheen” BBJ 777X at the 2018 Middle East Business Aviation Association (MEBAA) show in Dubai, United...
News Manned Systems
Japan Signs on for Second Boeing KC-46 Military Tanker and Transport Aircraft
Japan officials continue to boost the country’s defenses against threats, exercising the option to add a second Boeing KC-46 Pegasus military aerial refueling...
News Automotive
Moog to Collaborate on Bell Air Taxi
Forth Worth, Texas-based Bell Helicopter, a subsidiary of Textron Inc., will collaborate with Elma, New York-based Moog, for the development of the Flight Control Actuation System (FCAS) to support...
INSIDER Robotics, Automation & Control
AUDS Goes Undetected With New Ammunition
For the third iteration, the AUDS (anti-unmanned aerial vehicle defense system) recently returned to Fort Sill for the Maneuver Fires Integrated Experiment (MFIX). During the last few MFIX events,...
INSIDER Defense
Self-Generated Power Will Reduce Soldier Load
The bionic power knee harvester, also known as the PowerWalk, is an energy-harvesting device that is attached to both the upper and lower areas of both legs and generates power from movement....
News Energy
Could This Infinitely Variable Compression Mechanism Be the Next Piston Engine Game-Changer?
Whether its for economic incentives or reaching environmental goals, automotive and aerospace engine makers are continually chasing fractions of...
News Automotive
Automation Streamlines Accreditation to Speed Aerospace and Defense Technology Deployment
Government agencies are not known for moving quickly, and the Risk Management Framework (RMF) accreditation process is a prime example. For defense...
News Aerospace
FADA-CATEC Uses 3D Printing to Slim down the CHEOPS Satellite
The “CHaracterising ExOPlanets Satellite” (CHEOPS) – the first European Space Agency (ESA) scientific satellite to developed and manufactured in Spain – will launch in...
News Connectivity
German Air Traffic Controllers Shift to Completely Remote Operations at Saarbrücken Airport
Yesterday, a Luxair regional airliner arriving at Saarbrücken Airport was the first aircraft remotely cleared for landing from the Deutsche...
News Manned Systems
National Space Council Receives Report on Human Spaceflight in Low-Earth Orbit
As requested by the National Space Council; NASA, the Department of State, and the Department Commerce have submitted a report outlining future opportunities...
Articles Transportation
Testing Military Vehicle Steering Systems
Military vehicles play a vital role in protecting our society — and inevitably encounter many extreme conditions across their lifespan. From the varying weight, to the rough terrain, there is a lot...
Application Briefs Software
Compression Molding Press
Beckwood Press CompanyFenton, MO636-343-4100www.beckwood.com Beckwood Press Company, a company that specializes in the design and manufacturing of custom hydraulic presses, automation systems, and the Triform line of...
News Manufacturing & Prototyping
United Technologies Completes Acquisition of Rockwell Collins, Sheds Non-Aero Business Units
This week, United Technologies Corporation (UTC) of Farmington, Connecticut announced the completion of its acquisition of Cedar Rapids, Iowa-based...
News Defense
Etihad and Eos Partner to Develop 3D-Printed Cabin Interiors
EOS GmbH and Etihad Airways will partner to significantly expand local capabilities for industrial additive manufacturing – also known as 3D printing – in aviation. The...
News Manned Systems
NASA InSight Landing a Success
NASA's Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander successfully touched down on Mars after an almost seven-month, 300-million-mile (458-million-kilometer)...
News Test & Measurement
Boeing Completes Assembly of the First 777X
In a major production milestone called “final body join,” Boeing teams connected the major fuselage sections of the first 777X long-range, wide-body airliner in the company’s factory in...
News Manufacturing & Prototyping
SAE International Launches Aerospace Technology Symposium at Japan Aerospace 2018
SAE International, a global association committed to being the ultimate knowledge source for mobility engineering, is bringing together subject-matter experts...
News Manned Systems
Live Footage of NASA’s First Mars Landing in Six Years
NASA's Mars Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander is scheduled to touch down on the Red Planet at approximately 3 p.m....
News Electronics & Computers
Is Arm the Future for Airborne Platforms in Aerospace and Defense?
In recent years, Arm processors have made a quiet, understated entry into the aerospace and defense market. With a well-established reputation in commercial markets for...
News Test & Measurement
NASA’s Next X-Plane Passes Major Review
NASA has officially committed to a three-year development timeline that will lead to the first flight of its X-59 Quiet Supersonic Technology (QueSST) aircraft.
News Automotive
Lockheed Martin Skunk Works Begins Manufacturing X-59 Supersonic Aircraft Parts
Lockheed Martin (NYSE:LMT) Skunk Works in Palmdale, California, is manufacturing the first part for the X-59 Quiet Supersonic Technology aircraft, a milestone...
News Aerospace
Latest Enterprise Resource Planning Tool from Locatory Aimed at Revolutionizing Airline MRO
Aircraft maintenance, repair, and operational (MRO) services are full of strict deadlines, vital decisions, and intense documentation. With that...
News Defense
Space Tango Takes Its Next Steps in Orbital Manufacturing
Lexington, Kentucky-based Space Tango is aiming to launch an autonomous robotic orbital platform by the mid-2020s. The platform, called ST-42, is designed for scalable manufacturing...
News Defense
GKN Aerospace, COMAC, and AVIC to Manufacture Advanced Aerostructures
GKN Aerospace, COMAC subsidiary Shanghai Aircraft Manufacturing Company (SAMC), and Aviation Industry Corporation of China (AVIC International) are establishing a joint...
News Manned Systems
U.S. DoD Orders 255 Lockheed Martin F-35 Military Combat Aircraft in $22.7B Deal
Lockheed Martin Aeronautics Co., part of Lockheed Martin Corp., in Fort Worth, Texas, won a $22.7 billion contract from the U.S. Department of Defense (DoD) to...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Energy
SAE Automotive Podcast: Solid-State Batteries
Test & Measurement
SAE Automotive Engineering Podcast: Additive Manufacturing
Manufacturing & Prototyping
A New Approach to Manufacturing Machine Connectivity for the Air Force
Automotive
Optimizing Production Processes with the Virtual Twin
