Latest Stories
News Regulations/Standards
General Atomics Plans First Trans-Atlantic Flight of Medium-Altitude, Long-Range Remotely Piloted Aircraft
General Atomics Aeronautical Systems Inc. (GA-ASI) in San Diego plans to make the first-ever, trans-Atlantic flight of a...
News Manned Systems
Northrop Grumman Acquires Orbital ATK, Adds Solid Rocket Motors to Space Portfolio
Northrop Grumman Corp., an aerospace and defense technology company in Falls Church, Va., has acquired Orbital ATK Inc., one of only two leading U.S....
News Defense
Paterson Composites to Build Components for Astro Aerospace Autonomous Passenger Drone
Astro Aerospace, in Carpinteria, Calif., is partnering with carbon composite manufacturer Paterson Composites in Toronto to build components for its new,...
News Manufacturing & Prototyping
Boeing Virtualizes, Secures Additive Manufacturing Across Supply Chain with Assembrix
Boeing officials in Chicago are collaborating with Tel Aviv-based Assembrix to manage and protect intellectual property (IP) shared with vendors across...
News Defense
FAA, SAE International Focus on Engine Fire Protection System Standards for Aerospace
Aerospace systems, subsystems, and components must continue to operate as intended when exposed to fire, rather than going up in flames and ceasing to...
News Sensors/Data Acquisition
Insitu ScanEagle SUAS Boosts Coast Guard Mission Effectiveness
U.S. Coast Guard officials are expanding their deployment of small unmanned aircraft systems (sUAS) for intelligence, surveillance, and reconnaissance (ISR) operations, after...
News Design
A New ‘Works’ Is in the Works
This week, Pratt & Whitney, a division of United Technologies Corp. (UTC), announced the establishment of GatorWorks, a newly formed prototyping arm that will focus on the rapid and agile development...
News Aerospace
Additive Manufacturing Adoption Up, Growing Rapidly in Aerospace
The 3D printing materials market will experience high double-digit growth in the aerospace industry through 2024, as manufacturers of aircraft and spacecraft vehicles and...
News Test & Measurement
ONERA and DLR Shake up the Airbus BelugaXL Cargo Aircraft
The first five Airbus BelugaXL aircraft are slated to enter service in 2019. But, to reach that milestone, an exhaustive schedule of test and certification work must be completed.
News Test & Measurement
SAE International Issues First Technical Standards for Aerospace Additive Manufacturing
The Aerospace Material Specification committee on Additive Manufacturing (AMS-AM) at SAE International in Warrendale, Pennsylvania, has released its first...
News Automotive
AFRL Demos Advanced Multipurpose Robotics for Aerospace
Engineers from the Air Force Research Laboratory’s (AFRL’s) Manufacturing Technologies Division successfully demonstrated the capabilities of a new multi-purpose maintenance and...
News Manned Systems
The EVTOL Disruption Goes Viral
(This article is part two in a series by Richard Gardner. To read part one, please click here). Even at the early stages of this new era of urban air mobility, there is already a scramble amongst well-known...
News Aerospace
Embraer X EVTOL Debuts Design at Uber Elevate 2018
Autonomous flying cars and air-taxis have been the subject of science fiction movies for decades, but Brazilian aerospace manufacturer Embraer has now announced plans to develop a...
News Manned Systems
NASA Invites Proposal from Space-Based Large-Scale 3D-Printing Company
The International Space Station (ISS) is the most collectively expensive object built by humans. The total estimated cost is believed to be close to $150 billion. Aside...
News Aerospace
Boeing to Broaden Its Services Portfolio
June 2017 marked the launch of Boeing’s third major business unit Boeing Global Services. The new unit, which combined aspects of Boeing’s previous Commercial Aviation Services and Global Services...
News Manufacturing & Prototyping
GE Aviation Delivers Improved Turbine Engine During U.S. Army Preliminary Design Review
An updated version of GE Aviation’s T901-GE-900 turboprop engine used in the AH-64 Apache attack and UH-60 Black Hawk utility helicopters...
News Manned Systems
OA-X Phase Two Kicks Off
Yesterday, the sound of turboprops was heard again over Holloman Air Force Base in New Mexico.
News Robotics, Automation & Control
Beyond Catch and Release
Instead of relying on a few multi-million dollar unmanned aircraft, future warfighters may use swarms of hundreds of low-cost unmanned aerial vehicles (UAVs) to accomplish missions. In the face of air defenses, a...
News Aerospace
Avoiding EMI
Aircraft produced and operated today increasingly rely electrical and electronic equipment to perform various functions. If one of these electronic functions were to fail, the impact felt by, say, a passenger jet could be as...
News Regulations/Standards
Rolls-Royce Starts Lean-Burn Combustion Engine Icing Tests
In March, a new demonstrator engine by Rolls-Royce, featuring a cutting-edge lean-burn and low-emissions combustion system for future jet engine programs, began icing tests at the...
News Aerospace
AeroVironment Releases New Puma 3
Last month, AeroVironment, Inc. began accepting orders for their new Puma 3 unmanned aerial system (UAS). The company, which also manufacturers UASs for commercial applications, developed the Puma 3 with...
News Manufacturing & Prototyping
The Next Material Disruption
In a recent joint paper by the Aerospace Technology Institute (ATI) and the National Graphene Institute (NGI) at the University of Manchester, researchers outlined the disruptive impact potential of graphene...
News Aerospace
X Marks the Spot
LiquidPiston Inc., an advanced internal combustion engine (ICE) technology company, has reimagined combustion engines with a new platform that can run on multiple fuels, including diesel, jet fuel, and gasoline. This...
News Imaging
EU to Deploy UAV Traffic Management System by 2019
The Geneva-based body that navigates international air services for Switzerland and certain bordering countries, skyguide, joined forces with AirMap unmanned traffic management (UTM) to...
News Data Acquisition
Connect Them All
Traditionally, unmanned aerial vehicle (UAV) design was focused on airframe and propulsion system integration. UAV ground control systems were often thought of as a tool for flight-testing, sometimes after-the-fact. The...
News Manufacturing & Prototyping
Rolls-Royce's Next Move
It seems that every large Original Equipment Manufacturing (OEM) aerospace group has now realized that over the long term, there is enhanced profitability to be gained by offering customers a total package that...
News Materials
Breaking Bonds
Bonded composite airframe structures offer a potential to achieve more affordable manufacturing and more efficient structures, ultimately meeting United States Air Force (USAF) goals to increase range and reduce fuel...
News Defense
A Career in Aviation and Advocacy Takes Flight
For as long as he can remember, Ryan Gibson has wanted to work in the aircraft industry. Raised in an aviation family—his grandfather trained pilots during World War II, his father was a...
News Unmanned Systems
Boeing Unveils New Unmanned Cargo Air Vehicle Prototype
Amazon continues to push ahead with unmanned aerial delivery vehicles as part of its Prime Air service. Start-up company Zipline is delivering medical supplies across East Africa with...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Energy
SAE Automotive Podcast: Solid-State Batteries
Power
SAE Automotive Engineering Podcast: Additive Manufacturing
Aerospace
A New Approach to Manufacturing Machine Connectivity for the Air Force
Software
Optimizing Production Processes with the Virtual Twin
