Latest Stories
News Electronics & Computers
Tracking the Trends in Commercial Vehicle Communications
Seasoned operators of commercial vehicles will say they can sense how their vehicles are performing based on the sounds and vibrations the vehicles produce. Today, the latest...
Articles Power
Improving Heavy-duty Engine Component Efficiencies
Cylinder deactivation (CDA) is an effective method to fine-tune engine displacement for maximum output and improve fuel economy by adjusting the number of active cylinders in combustion...
Articles Power
Pumping Up Hydraulic Capabilities
Hydraulic technologies are evolving rapidly as clever engineers figure out how to alter spools and valves. These mechanical changes pale in comparison to the advances that transpire as design teams...
Technical Innovation RF & Microwave Electronics
The Benefits and Advantages of Digital Signal Processing
In the quest for increased performance, flexibility, configurability, communications, and remote monitoring and control, the power electronics industry is increasingly moving from...
Technical Innovation Test & Measurement
Rugged Data-Acquisition Systems Speed Tests of Off-Highway Equipment
Just as engineers of consumer vehicles are being asked to shorten development cycles and improve performance, reliability, and safety, so are developers of off-highway...
News Software
Evaluating New Forestry Machines in a Fraction of the Time
The predominant forest harvesting method used in northern Europe is cut-to-length logging (CTL). CTL is based on a two-machine solution—a harvester is used for felling, delimbing,...
Articles RF & Microwave Electronics
Can Turning off the Engine Turn Customers On?
Stop-start systems have seen success in Europe, but development teams focused on the U.S. market are still working to get the right combination of fuel efficiency and comfort. Smooth restarts...
Product Briefs Aerospace
Self-Lubricating Plastic Bearing Material
The iglide L500 plastic bearing material from igus is suited for continuous operation in high-speed rotation applications under low loads. The material combines high wear resistance in long-running,...
News Mechanical & Fluid Systems
Electric Oil Pump
The Model OP40i brushless dc electric oil pump from Engineered Machined Products Inc. (EMP) features high-performance gerotor pumping technology, including a long-life, brushless, dc sensorless motor, which is sealed and...
Technology Report Manufacturing & Prototyping
Hot-Stamping Process from Schuler Employs Flexible 'Pressure Controlled Hardening'
In the press hardening method, parts are heated to 930°C (1,706°F) and then simultaneously cooled and hardened in the subsequent forming process, which gives the parts their extremely high rigidity.
Technical Innovation Transportation
Software's Growth Shines Spotlight on Eliminating Defects
Software’s becoming a greater factor in vehicle development, prompting a heightened focus on reducing the number of defects in code. Early planning, discipline, and continuous...
Products Manufacturing & Prototyping
SIP DC-DC Converters
Premier Magnetics (Lake Forest, CA) has announced additions to its PDCS family of self-contained, single- in-line-package (SIP) DC-DC converters for distributed power applications. The additions to the PDCS product family...
Products Manufacturing & Prototyping
5-Slot 3U Mission Computer
Curtiss-Wright Corporation (Ashburn, VA) announced that its Defense Solutions division has introduced a new fully integrated 5-slot 3U OpenVPX™ rugged mission computer designed to quickly deploy computer power on...
Products Manufacturing & Prototyping
Contactless Connectivity System
TE Connectivity’s (TE) (Berwyn, PA) new ARISO Contactless Connectivity system, available from Mouser Electronics (Mansfield, TX), is a hybrid interconnect system that allows for both power and data to be sent...
Products Manufacturing & Prototyping
Micro System-on-Module
Inforce Computing®, Inc. (Fremont, CA) has announced the ultrasmall Inforce 6501™ Micro System-on-Module (SOM). The Inforce 6501 Micro SOM is powered by the Qualcomm® Snapdragon™ 805 processor. The Snapdragon 805...
Products
Carbon-Graphite Bushings
Metallized Carbon Corporation (Ossining, NY) has announced Metcar® carbon- graphite bushings for use in gear pumps that pump aviation fuel for aircraft engines. The carbon- graphite bushings are used to support both...
Products Manufacturing & Prototyping
XMC Modules
Acromag’s (Wixom, MI) new XMC-7A200 is a XMC mezzanine module enhanced with Xilinx ® Artix® -7 FPGA for low-power consumption and exceptional 128M × 16-bit Quad DDR3 SDRAM processing performance. Reconfigurable Artix-7 FPGA is...
Products Manufacturing & Prototyping
Small Form Factor Systems
4DSP (Austin, TX) has announced two new additions to its Compact Embedded System (CES) line. The CES820 and the ruggedized CESCC820 variant both feature an upgraded Xilinx Kintex UltraScale FPGA and support for the new...
Products Manufacturing & Prototyping
Flow Transmitter
The AS-FT Flow Transmitter from FCI Aerospace (San Marcos, CA) features a rugged, highly reliable thermal dispersion technology sensor design that is ideal for mission-critical air, gas and fluid monitoring systems on...
Products
VPX Embedded Computer
Kontron (Augsburg, Germany) introduced its next-generation StarVX high performance embedded computing (HPEC) system based on the company’s VX3058 3U VPX single board computer (SBC). Leveraging the processing power of the...
Products Manufacturing & Prototyping
Flat Cable Assemblies
Cicoil's (Valencia, CA) flat cable assemblies are designed for use in targeting pods, thermographic camera and infrared sight systems typically utilized in multi-role fighter aircraft, attack helicopters and maritime...
Products Manufacturing & Prototyping
Aerospace Gimbals Test Service
A new test service introduced by Bal Seal Engineering, Inc. (Foothill Ranch, CA) offers OEMs verified performance results for Bal Seal® spring-energized rotary/face seals used in aerospace and defense gimbal...
Articles Aerospace
3-Phase Single-Step Power Correction in MilAero Systems
As OEMs seek advantages in Size, Weight, Power and Cost (SWaP-C), focus is shifting to advancements in power electronics. Gaining an advantage requires close attention not only to...
Articles Aerospace
Using Sensor Technology to Combat Legacy Issues in Defense Avionics
Reliance on aging military platforms has become a global concern and military aircraft today are expected to remain in service for longer than their original life cycles. This...
Articles Defense
Counterfeit Electronics in the DOD Supply Chain
Counterfeit semiconductor devices entering the Department of Defense (DOD) supply chain continue to pose risks to many of our country’s most sophisticated aerospace and defense systems. However,...
Articles Aerospace
Touch and Go
Since the digital revolution changed forever the pilot’s working environment, innovators and suppliers of cockpit systems have strived to provide a continuous stream of new developments and products that offer increasingly...
Articles Aerospace
Sandwich Cores for the Future
The search for lighter weight, stronger materials to construct airplanes and spacecraft remains as important as ever. But it takes a long time for new materials in aerospace structures to make their way into...
Articles Defense
Making AESA Radar More Flexible
A modular, building-block approach brings greater design flexibility to Active Electronically Scanned Array (AESA) radar technology, simplifying system integration, and permitting rapid first-line repair with no...
Articles RF & Microwave Electronics
Developing Secondary Surveillance Radar Automated Test Equipment
Unlike primary radars, Secondary Surveillance Radar (SSR) calculates the range and azimuth of a target, such as an aircraft, using a bidirectional communication link to gather...
Top Stories
INSIDERDefense
New 3D-Printable Nanocomposite Prevents Overheating in Military Electronics
Technology ReportSoftware
Talking SDVs and Zonal Architecture with TE Connectivity
NewsDesign
2026 Nissan Sentra Review: Putting the Pieces Together
INSIDERDesign
New Defense Department Program Seeks 300,000 Drones From Industry by 2027
INSIDERDefense
Anduril Completes First Semi-Autonomous Flight of CCA Prototype
INSIDERDefense
Webcasts
Transportation
Hydrogen Engines Are Heating Up for Heavy Duty
Manufacturing & Prototyping
SAE Automotive Podcast: Solid-State Batteries
Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
Automotive
Optimizing Production Processes with the Virtual Twin
