Articles

Electronics & Computers

HMIs Offer Something for Everyone

Equipment buyers typically focus on factors like horsepower and lifting capability, but human-machine interfaces may be the most important factor for off-highway vehicle operators. Differentiating these...

Articles

Power

Hybrid Variety in Off-Highway

Perhaps the most interesting point about hybrids in the off-highway market is the sheer variety of architectures and energy storage choices.

News

Propulsion

Electrified Off-Highway Powertrains Search for Marketing Power

Electrified powertrains have seen success in commercial applications like buses and small vehicles, but in many fields, they’ve seen only limited success. Today’s low fuel...

News

Propulsion

HydraForce Strengthens Electrohydraulic-Controls Position in India

HydraForce, a manufacturer of hydraulic cartridge valves, manifolds, and electrohydraulic controls, has established a new LLC corporation in India. HydraForce India LLC,...

News

Energy

Volvo Launches First Hybrid Buses in India

The first Volvo hybrid city bus pilot will start in the first half of 2016 in Navi Mumbai with Navi Mumbai Municipal Transport (NMMT). To promote environmentally friendly vehicles, the Indian...

Product Briefs

RF & Microwave Electronics

Magnetostrictive Position Sensors

MTS Sensors has increased the scope of its GB-Series of highly accurate, programmable magnetostriction-based linear position sensors so that further applications can be addressed. For these latest additions to...

Product Briefs

Electronics & Computers

Angular Rate Sensor

Diversified Technical Systems, Inc. (DTS) offers the ARS PRO high-performance angular rate sensor, which is designed for a range of applications including vehicle handling, crash, biomechanics, and even high-rate ballistics...

News

RF & Microwave Electronics

Caterpillar's D6N Dozer Uses Technology to Improve Efficiency, Productivity

Caterpillar says its new D6N dozer delivers a 10 to 15% boost in fuel efficiency and up to 10% better productivity compared to the previous model. It is also the...

Articles

Electronics & Computers

Tracking the Trends in Commercial Vehicle Communications

Seasoned operators of commercial vehicles will say they can sense how their vehicles are performing based on the sounds and vibrations the vehicles produce. Today, the latest...

News

RF & Microwave Electronics

The Benefits and Advantages of Digital Signal Processing

In the quest for increased performance, flexibility, configurability, communications, and remote monitoring and control, the power electronics industry is increasingly moving from...

News

Test & Measurement

Rugged Data-Acquisition Systems Speed Tests of Off-Highway Equipment

Just as engineers of consumer vehicles are being asked to shorten development cycles and improve performance, reliability, and safety, so are developers of off-highway...

Technical Innovation

Software

Evaluating New Forestry Machines in a Fraction of the Time

The predominant forest harvesting method used in northern Europe is cut-to-length logging (CTL). CTL is based on a two-machine solution—a harvester is used for felling, delimbing,...

News

Materials

Self-Lubricating Plastic Bearing Material

The iglide L500 plastic bearing material from igus is suited for continuous operation in high-speed rotation applications under low loads. The material combines high wear resistance in long-running,...

News

Mechanical & Fluid Systems

Electric Oil Pump

The Model OP40i brushless dc electric oil pump from Engineered Machined Products Inc. (EMP) features high-performance gerotor pumping technology, including a long-life, brushless, dc sensorless motor, which is sealed and...

News

Test & Measurement

Software's Growth Shines Spotlight on Eliminating Defects

Software’s becoming a greater factor in vehicle development, prompting a heightened focus on reducing the number of defects in code. Early planning, discipline, and continuous...

News

Manufacturing & Prototyping

Hot-Stamping Process from Schuler Employs Flexible 'Pressure Controlled Hardening'

In the press hardening method, parts are heated to 930°C (1,706°F) and then simultaneously cooled and hardened in the subsequent forming process, which gives the parts their extremely high rigidity.

Articles

Automotive

Improving Heavy-duty Engine Component Efficiencies

Cylinder deactivation (CDA) is an effective method to fine-tune engine displacement for maximum output and improve fuel economy by adjusting the number of active cylinders in combustion...

Articles

Transportation

Pumping Up Hydraulic Capabilities

Hydraulic technologies are evolving rapidly as clever engineers figure out how to alter spools and valves. These mechanical changes pale in comparison to the advances that transpire as design teams...

Product Briefs

Electronics & Computers

Two-Way Communication System

The Sensear Heavy Vehicle Communication Solution (HVCS) enables clear transmission of two-way radio communications and stereo audio for operating heavy vehicles at industrial sites. The combination of noise from...

Q&A

Power

Daimler Trucks' Lessons Learned from SuperTruck Program

Daimler Trucks North America has referred to its $40 million, five-year SuperTruck program that concluded earlier this year as “a playground for our engineers.” Overseeing this...

News

Power

Doosan Introduces Tier 4 Final Wheeled Excavator

Doosan has expanded its wheeled excavator lineup with the Tier 4 Final DX210W-5 excavator, which replaces the -3 Tier 4 Interim model.

News

Photonics/Optics

Laser Distance Meter

Schmitt Industries, Inc., a manufacturer of laser distance meters under the Acuity product brand, announces availability of the AR 2000 line, with special capabilities for distance measurement on hot surfaces—e.g., red hot, glowing steel, and for outdoor use in bright lighting conditions with high constant or stray light...

Product Briefs

Photonics/Optics

Fiber Laser System

Prima Power has introduced the Laserdyne 430 Versa 3D fiber laser system with third-generation BeamDirector, designed for the typical laser processing needs of tool rooms, model shops, and R&D centers of manufacturers. The system provides a balance of cost, flexibility, and precision for laser cutting, welding, drilling,...

Product Briefs

Electronics & Computers

Inertial Measurement Unit

Tamagawa Seiki has launched a series of automotive and industrial-grade inertial measurement units (IMUs) for affordable high-performance applications. Model AU7595 features high accuracy and GPS for measuring...

News

Automotive

Thermal Shields

Interface Performance Materials has introduced two new thermal shields in the Select-a-Shield thermal product family—THH-1010 and TFP-3065—the first innovations in a series scheduled to be released through 2016. Suitable...

News

Automotive

Quick Connector for Fuel and Urea Systems

Norma Group has developed a new plastic quick connector for use on fuel and NOx-reducing diesel urea systems in passenger, commercial, and off-highway vehicles. Produced at a Norma Americas plant in...

News

Transportation

Clean-Sheet Design for Proterra's All-Electric City Bus

The Proterra Catalyst all-electric transit bus nabs double-digit miles per gallon equivalent (MPGe), vastly outperforming its diesel, compressed natural gas, and diesel hybrid-electric...

News

Power

Webasto Engine-Off Cooling Keeps Off-Highway Cabins Comfortable

The new Webasto Polar Cab TS engine-off cabin cooling system provides on-demand cooling during downtime, resulting in fuel savings, reduced idle time, increased productivity,...