MOBILITY ENGINEERING Produced by SAE Media Group
MOBILITY ENGINEERING
Magazines
Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Cable Installation Simulator

A cable installation simulator from W. L. Gore & Associates aids in evaluating the stress of installation on microwave airframe assemblies, thereby minimizing the risk of cable assembly damage or failure during installation. By comparing signal integrity before and after installation, Gore can engineer assemblies that withstand airframe installation as well as the demands of the aircraft’s flight envelope. Use of the installation simulator gives aircraft manufacturers and installers evidence that their assemblies will provide the same level of electrical performance after installation as when they are new. In addition, they can be assured that the assemblies will continue to perform reliably throughout the service life of the aircraft.

Topics:
Aerospace Computer-Aided Design (CAD) Defense Manufacturing & Prototyping

More From SAE Media Group

    Top Stories

    INSIDERRF & Microwave Electronics

    Feature Image FAA to Replace Aging Network of Ground-Based Radars

    PodcastsDefense

    Feature Image A New Additive Manufacturing Accelerator for the U.S. Navy in Guam

    NewsSoftware

    Feature Image Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel

    Road ReadyPower

    Feature Image 2026 Toyota RAV4 Review: All Hybrid, All the Time

    INSIDERDefense

    Feature Image F-22 Pilot Controls Drone With Tablet

    INSIDERRF & Microwave Electronics

    Feature Image L3Harris Starts Low Rate Production Of New F-16 Viper Shield

    Webcasts