MOBILITY ENGINEERING Produced by SAE Media Group
MOBILITY ENGINEERING
Magazines
Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Nanotube Fibers Made by Hand to Cut Production Time

A method developed at Rice University allows researchers to make short lengths of strong, conductive fibers from small samples of bulk nanotubes in about an hour. It can take grams of material and weeks of effort to optimize the process of spinning continuous fibers, but the new method cuts that down to size, even if it does require a bit of hands-on processing.

The process reproduces the high nanotube alignment and high packing density typical of fibers produced via spinning, but at a size sufficient for strength and conductivity tests.

Source 

Topics:
Aerospace Materials

More From SAE Media Group

    Top Stories

    INSIDERLighting Technology

    Feature Image Using Ultrabright X-Rays to Test Materials for Ultrafast Aircraft

    INSIDERManufacturing & Prototyping

    Feature Image New 3D-Printable Nanocomposite Prevents Overheating in Military Electronics

    INSIDERDefense

    Feature Image F-22 Pilot Controls Drone With Tablet

    Technology ReportAR/AI

    Feature Image Talking SDVs and Zonal Architecture with TE Connectivity

    INSIDERManufacturing & Prototyping

    Feature Image New Defense Department Program Seeks 300,000 Drones From Industry by 2027

    INSIDERAerospace

    Feature Image Anduril Completes First Semi-Autonomous Flight of CCA Prototype

    Webcasts