Northrop Grumman to Demonstrate Robotic Manufacturing in Space
Made In Space (MIS) has awarded Northrop Grumman Corporation a subcontract to support NASA’s Space Technology Mission Directorate (STMD) demonstration of the autonomous robotic manufacturing and assembly platform, Archinaut, on a flight mission. The flight demonstration contract award marks the second phase of the NASA-funded Archinaut technology development program which was initially awarded in 2016.
“Demonstrating additive manufacturing in space will open up new doors in the design and construction of space structures that to date have been limited by the volume of a launch vehicle,” said Richard Stapp, vice president, resiliency and rapid prototyping, Northrop Grumman. “Effectively building structures in space is one of the next big steps in our continuous journey of space exploration.”
The objective of Archinaut’s flight demonstration mission is to construct two 10-meter solar arrays, on orbit, to power a small satellite. The Archinaut system will be integrated into an ESPA class satellite bus and launched into space. Once in orbit, Archinaut will employ its extended structure additive manufacturing capabilities and advanced robotics to manufacture and assemble the satellite’s power generation system. The Archinaut-created solar array will yield nearly five times the power currently available to ESPA-class satellites.
Archinaut’s flight demo mission will demonstrate transformative, near-term benefits for the satellite industry. Robust small satellite power systems manufactured on-orbit, would reduce launch mass and cost by allowing small satellites to host power-intensive payloads previously reserved for larger platforms. These benefits could drastically lower the barrier of entry for new users and revolutionize satellite design.
This flight demonstration contract award follows a successful ground-based testing campaign of Archinaut’s core additive manufacturing and robotic assembly technologies, qualifying the Archinaut platform for spaceflight. Northrop Grumman supported phase 1 of Archinaut development by hosting thermal vacuum testing at Space Park in California. This testing marked a critical milestone in the Archinaut program to validate the technology readiness of Archinaut’s system for the space environment. Northrop Grumman’s resiliency and rapid prototyping program leveraged its extensive engineering expertise in avionics and systems integration during the first phase of the program.
Top Stories
NewsPower
Off-Highway Hybrids Are Entering Prime Time
INSIDERAerospace
Are Boeing 737 Rudder Control Systems at Risk of Malfunctioning?
INSIDERMaterials
Is the Department of Defense Stockpiling Enough Critical Materials?
INSIDERMechanical & Fluid Systems
Designing Next-Generation Carbon Dioxide Removal Technology for Better Life in...
INSIDERAerospace
Barracuda: Anduril's New Software-Defined Autonomous Air Vehicles
INSIDERAerospace
Webcasts
Software
Automotive Hardware Security Modules: Functionality, Design, and...
RF & Microwave Electronics
The Benefits and Challenges of Enabling Direct-RF Sampling
Test & Measurement
The Testing Equipment You Need to Keep Pace with Evolving EV...
Materials
Advances in Zinc Die Casting Driving Quality, Performance, and...
Transportation
Fueling the Future: Hydrogen Solutions for Commercial Vehicle...
Defense
Maximize Asset Availability in the Aerospace and Defense Industry