MOBILITY ENGINEERING Produced by SAE Media Group
MOBILITY ENGINEERING
Magazines
Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

NASA Tests Next-Generation Composite Wing

The Passive Aeroelastic Tailored wing is tested in a fixture at NASA Armstrong Flight Research Center’s Flight Loads Laboratory in California. (NASA Photo/Ken Ulbrich)

Two series of structural tests on a uniquely designed, high-aspect-ratio, lightweight experimental test article could demonstrate a new method of wing design and fabrication. The Passive Aeroelastic Tailored (PAT) wing – a tow steered composite wing – is the most highly instrumented wing NASA has ever tested.

The next step after completing the tests is to compare the actual results to those that were predicted and use that information to create a full-scale wing design for a commercial aircraft.

Source 

Topics:
Aerospace Aviation

More From SAE Media Group

    Top Stories

    INSIDERRF & Microwave Electronics

    Feature Image FAA to Replace Aging Network of Ground-Based Radars

    PodcastsDefense

    Feature Image A New Additive Manufacturing Accelerator for the U.S. Navy in Guam

    NewsSoftware

    Feature Image Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel

    Road ReadyPower

    Feature Image 2026 Toyota RAV4 Review: All Hybrid, All the Time

    INSIDERDefense

    Feature Image F-22 Pilot Controls Drone With Tablet

    INSIDERRF & Microwave Electronics

    Feature Image L3Harris Starts Low Rate Production Of New F-16 Viper Shield

    Webcasts