Latest Stories
News Manned Systems
Batteries Not the Only Route to EV Efficiency
Much of the talk around the switchover to electric power in commercial electric vehicles (EV) focuses on batteries, whether it be their range, weight, energy and power density, or expected...
News Energy
Solving the EV Range Vs. HVAC Dilemma
The loss in range from climate control operation on battery electric vehicles (BEV) has become a source of concern among automakers as many of them begin the transition from internal combustion...
News Power
Model-Based Analysis of E-Motor Designs
In the auto industry’s shift toward electric vehicles (EV), permanent magnet motors (PMMs) are increasingly serving a variety of roles, including the vehicle’s traction motor and various...
News Power
NVH Simulation Meets Realism
Vehicle development is amidst three concurrent revolutions – electrification, autonomy and the shift in product design and engineering to more up-front simulation. Any one of those would be a challenge for...
Q&A Lighting
Engineering a ‘Beast’ of an Electric SUV
General Motors calls it a “beast,” a nickname that the 2022 GMC Hummer SUV earns on its numbers alone. Like the electric Hummer pickup, the SUV packs a propulsion system capable of...
News Power
Suppliers Face the Electrified Future
Suppliers face critical decisions on a daily basis. Crises come and go. Dealing with erratic production schedules driven by semiconductor supply shortages and coping with rising prices for strategic...
News Energy
Is GaN the Future for EV Chips?
Technology advances in electric vehicles (EV) are steadily shrinking the vehicle bill-of-materials cost while creating power efficiencies and new design solutions. The combination of more power-dense...
News Energy
Jeep Engineers a Wrangler EV with Manual Gearbox
For 4x4 enthusiasts who see the electric-vehicle (EV) future as the conclusive death-blow to manual transmissions, there is hope. Jeep engineers have unveiled the first battery-electric...
Road Ready Power
Cadillac to Launch 2023 Lyriq EV Months Earlier Than Planned
Citing advances in its vehicle-development processes and tireless work from a global engineering team during the COVID-19 pandemic, executives and engineers for General Motors’...
News Software
Mercedes Kicks off Dedicated EV Lineup with Flagship EQS
Mercedes-Benz has revealed the all-new 2022 EQS EV sedan. The EQS is the first all-electric luxury 4-door model from Mercedes built upon a dedicated (and modular) EV platform. The...
Articles Sensors/Data Acquisition
Ford Gets in the ‘Hands-Free’ Game with BlueCruise
There's a whole lot about Ford's hands-free driving technology that the automaker isn't revealing just yet. But at least it now has a name – BlueCruise – and some preliminary...
News Connectivity
How 3D Printing Could Add Efficiency to EV Power Electronics
“Think production!” Perhaps that advice should be posted on the wall of every design office, R&D lab and advanced technology center in the auto industry. Although obeying...
News Mechanical & Fluid Systems
Bosch’s EV Efficiency Upgrade: Continuously Variable Transmissions
As electric vehicles (EVs) move from niche offerings to mainstream roles in the product portfolios of the world’s traditional automakers, research and development to...
Articles Energy
Pumping EV Heat
The Automotive Career Development Center (ACDC) that I founded over 20 years ago provides training and tech support to the world’s independent electric-vehicle (EV and hybrid) technicians, who will be asked to fix and...
News Energy
Charting the ICE Future with Mahle’s Martin Berger
Electrification nets the current headlines and Wall Street fervor, but the internal combustion engine (ICE) will easily soldier on for several decades, serving as the core of many...
News Power
Internal Combustion: Once More, with Feeling
Following its 2020 acquisition of Delphi Technologies, BorgWarner now has a vast portfolio of internal-combustion engine (ICE) foundation components, everything from fuel- and air-handling...
Supplier Eye Software
A Hard Look at New Sourcing Strategies
From COVID to chips: Just as the industry was beginning to put 2020 in the rearview mirror, it gets slammed with more supply-chain disruptions. Severe chip capacity issues out of China, Taiwan and...
Articles Materials
Electric-Truck Battery Enclosures Balance Demands
Manufacturers of battery-electric commercial trucks have similar requirements for their battery enclosures as do their passenger-vehicle counterparts. Lightweight construction is very...
News Energy
Actuating Hybrid and EV Efficiency
Axle-disconnect systems have been a fuel-efficiency enabler in recent years, delivering improvements of up to 10% in all-wheel drive and four-wheel-drive cars and light trucks, depending on vehicle...
Technology Report Energy
Constellium Develops New Alloys for EV Battery Enclosures
Aluminum is the dominant material for electric vehicle (EV) battery enclosures for one simple but significant factor: lightweighting capability. All currently available long-range...
Original Equipment Connectivity
Oshkosh Defense Selected to Assemble Next-Gen Mail Trucks
Oshkosh Defense won the long-awaited contract to manufacture the U.S. Postal Service’s next generation of postal delivery vehicles, which are expected to begin appearing on routes...
Road Ready Energy
2022 Bolt EUV: Super Cruise Comes to Chevy
General Motors has made the first step toward democratizing Super Cruise, its SAE Level 2 driver-assist system that is designed to reduce driver workload during long trips. In summer 2021, Super...
Q&A Power
Deere Bullish on Biodiesel, Renewable Diesel
Petroleum-based fuels long have been the industry standard for heavy equipment primarily due to the lack of acceptable, cost-effective and reliable alternatives. But with growing interest in...
News Connectivity
Preview: SAE 2021 WCX
SAE International’s 2021 WCX event will unfold entirely online April 13-15 with hundreds of technical paper presentations and insights from top mobility-industry leaders, who will share their perspectives on...
News Power
Atlis EV Pickup, Platform Targets Medium-Duty Market
Electric-vehicle (EV) startups no longer are a phenomena – and the subset of startups focused just on EV pickup trucks seems to add a new player nearly every quarter. The business plan...
News Manufacturing & Prototyping
Volkswagen Details Plan for New EV Battery Cell, Manufacturing
Volkswagen announced on March 15 a new development and business model for the production of batteries for electric vehicles (EVs) that is projected to yield as much as a 50%...
News Power
AI Points the Way to Better EV Battery Management
After two decades of significant advances in electric vehicle (EV) battery development, innovations continue to bring promises of greater battery performance, safety, faster charging,...
News Energy
Powering the IoT Without Batteries Using Energy Harvesting
Ensuring that vehicles are reliably connected to the Internet of Things (IoT) is only possible when every step of the IoT is itself robust. A vehicle-to-home-thermostat connection,...
News Power
German OEMs Flex 3D Manufacturing Muscle
A chief impediment for wider adoption of additive manufacturing long has been its potential for application in high-volume and high-throughput production. But continuing process and technique...
Top Stories
INSIDERRF & Microwave Electronics
FAA to Replace Aging Network of Ground-Based Radars
PodcastsDefense
A New Additive Manufacturing Accelerator for the U.S. Navy in Guam
NewsSoftware
Rewriting the Engineer’s Playbook: What OEMs Must Do to Spin the AI Flywheel
Road ReadyPower
2026 Toyota RAV4 Review: All Hybrid, All the Time
INSIDERDefense
F-22 Pilot Controls Drone With Tablet
INSIDERRF & Microwave Electronics
L3Harris Starts Low Rate Production Of New F-16 Viper Shield
Webcasts
Aerospace
Powering America’s EV Future: Connect, Collaborate, Innovate
Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Internet of Things
A FREE Two-Day Event Dedicated to Connected Mobility
Power
SAE Automotive Podcast: Solid-State Batteries
Power
SAE Automotive Engineering Podcast: Additive Manufacturing
Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force