Latest Stories
News Robotics, Automation & Control
Marvin Test Solutions Tailors GX3800e PXI Express FPGA Module for Test, Automation, Instrumentation Engineering
Marvin Test Solutions Inc., a global provider of test solutions for aerospace, defense, and manufacturing, in Irvine, California,...
News Manned Systems
Astronaut Garbage Is a Serious Operational Concern When Travelling to the Moon and Mars
For decades, the approach to managing astronaut refuse has involved temporarily storage and then disposal – either by returning it to Earth or by...
News Defense
Boeing Delivers First Airplane from New 737 Completion and Delivery Center in Zhoushan, China
Boeing and joint venture partner Commercial Aircraft Corporation of China, Ltd (COMAC) marked the delivery of the first aircraft from the new 737...
News Test & Measurement
Northrop Grumman Tests, Qualifies Orion Launch Abort Motor for Flight in Cold Conditions
Northrop Grumman Corp. (NYSE:NOC), NASA, and Lockheed Martin engineers brought the Orion spacecraft one step closer to its first flight atop NASA’s...
News Test & Measurement
USAF Take Rates Continue to Drop Despite Retainment Bonuses
Despite the May 2018 decision to increase the cap for pilot retainment bonuses – or “take rates” – the United States Air Force (USAF) is still suffering from a major pilot...
INSIDER Aerospace
Virtual Runway, Real Pilot Practice
When a plane overshoots the final approach, often the pilot’s natural — and dangerous — instinct is to pitch the aircraft up to slow down and land. It’s one of the leading causes of accidents,...
INSIDER Aerospace
Improving Performance of Hybrid-Electric Aircraft
Although hybrid-electric cars are becoming commonplace, similar technology applied to airplanes comes with significantly different challenges. University of Illinois aerospace engineers are...
News Manned Systems
Mitsubishi Heavy Industries Aero Engines Completes Assembly of First Pratt & Whitney GTF PW1200G Engine
The first Pratt & Whitney PW1200G Geared Turbofan (GTF) engine assembly was completed at the Mitsubishi Heavy Industries Aero...
News RF & Microwave Electronics
High-Altitude Pseudo Satellites: New Battle for Inner Space, Part II
A new development applicable to the production of the Airbus Zephyr lightweight, solar unmanned aircraft is the Airbus Spider radar payload, a novel commercial...
News Energy
High-Altitude Pseudo Satellites: New Battle for Inner Space, Part I
Farnborough International Airshow 2018 coincided with the opening of the world’s first serial HAPS assembly line by Airbus Defence and Space, with the Farnborough-based...
News Manned Systems
Latest Boeing Business Jets 777X VIP Cabin Concept Debuts at MEBAA in Dubai
Pulling out all stops, Boeing Business Jets debuted the “Shaheen” BBJ 777X at the 2018 Middle East Business Aviation Association (MEBAA) show in Dubai, United...
News Aerospace
Japan Signs on for Second Boeing KC-46 Military Tanker and Transport Aircraft
Japan officials continue to boost the country’s defenses against threats, exercising the option to add a second Boeing KC-46 Pegasus military aerial refueling...
News Automotive
Moog to Collaborate on Bell Air Taxi
Forth Worth, Texas-based Bell Helicopter, a subsidiary of Textron Inc., will collaborate with Elma, New York-based Moog, for the development of the Flight Control Actuation System (FCAS) to support...
INSIDER Sensors/Data Acquisition
AUDS Goes Undetected With New Ammunition
For the third iteration, the AUDS (anti-unmanned aerial vehicle defense system) recently returned to Fort Sill for the Maneuver Fires Integrated Experiment (MFIX). During the last few MFIX events,...
INSIDER Defense
Wind Tunnel, Lasers Provide Hypersonic Proving Ground
It’s about speed, and Sandia National Laboratories, with a hypersonic wind tunnel and advanced laser diagnostic technology, is in a position to help U.S. defense agencies understand...
INSIDER Power
Self-Generated Power Will Reduce Soldier Load
The bionic power knee harvester, also known as the PowerWalk, is an energy-harvesting device that is attached to both the upper and lower areas of both legs and generates power from movement....
News Power
Could This Infinitely Variable Compression Mechanism Be the Next Piston Engine Game-Changer?
Whether its for economic incentives or reaching environmental goals, automotive and aerospace engine makers are continually chasing fractions of...
News Weapons Systems
Automation Streamlines Accreditation to Speed Aerospace and Defense Technology Deployment
Government agencies are not known for moving quickly, and the Risk Management Framework (RMF) accreditation process is a prime example. For defense...
News Defense
FADA-CATEC Uses 3D Printing to Slim down the CHEOPS Satellite
The “CHaracterising ExOPlanets Satellite” (CHEOPS) – the first European Space Agency (ESA) scientific satellite to developed and manufactured in Spain – will launch in...
News Manned Systems
German Air Traffic Controllers Shift to Completely Remote Operations at Saarbrücken Airport
Yesterday, a Luxair regional airliner arriving at Saarbrücken Airport was the first aircraft remotely cleared for landing from the Deutsche...
INSIDER Aerospace
Smart Skin Simplifies Spotting Strain in Aircraft
Thanks to one peculiar characteristic of carbon nanotubes, engineers will be able to measure the accumulated strain in an airplane over the entire surface or down to microscopic levels....
News Regulations/Standards
National Space Council Receives Report on Human Spaceflight in Low-Earth Orbit
As requested by the National Space Council; NASA, the Department of State, and the Department Commerce have submitted a report outlining future opportunities...
Articles Materials
Optimizing Plasma Treatments to RESOLVE Challenging Adhesion Issues
The process of determining the ideal plasma treatment that will resolve a challenging bonding or adhesion issue is an exact science, often the domain of chemists and...
Articles Materials
Does Your Coating System Require Climate Control? What to Look For and What to Expect
There is one aspect of the paint and coatings finishing business virtually guaranteed to give the budget director heart failure: climate control. There's no...
Articles Software
Lightweighting Parts Using 3D Metal Printing
Metal additive manufacturing (3D printing), also known as Direct Metal Laser Sintering (DMLS) or Powder Bed Fusion (PBF), is changing the way metal parts are designed and produced. New software,...
Articles Test & Measurement
Applying Augmented Reality Technology to Aerospace Manufacturing
New and powerful projection based augmented reality (AR) technology is transforming the way products — ranging from turbine engines to pacemakers — are made, while...
Application Briefs Test & Measurement
Laser Guided Rocket System
Arnold DefenseSt. Louis, MO636-575-9190www.arnolddefense.com Arnold Defense, the St Louis based international manufacturer and supplier of 2.75-inch rocket launchers, recently announced the commencement of initial...
Application Briefs Photonics/Optics
Biological Threat Detectors
FLIR Systems, Inc.Wilsonville, OR1-800-254-0630www.flir.com/IBAC2 FLIR Systems, Inc. announced recently that it has received a delivery order for FLIR IBAC™ 2 biological agent detector systems to support the United...
Top Stories
INSIDERManufacturing & Prototyping
How Airbus is Using w-DED to 3D Print Larger Titanium Airplane Parts
INSIDERManned Systems
FAA to Replace Aging Network of Ground-Based Radars
NewsTransportation
CES 2026: Bosch is Ready to Bring AI to Your (Likely ICE-powered) Vehicle
NewsSoftware
Accelerating Down the Road to Autonomy
EditorialDesign
DarkSky One Wants to Make the World a Darker Place
INSIDERMaterials
Can This Self-Healing Composite Make Airplane and Spacecraft Components Last...
Webcasts
Defense
How Sift's Unified Observability Platform Accelerates Drone Innovation
Automotive
E/E Architecture Redefined: Building Smarter, Safer, and Scalable...
Power
Hydrogen Engines Are Heating Up for Heavy Duty
Electronics & Computers
Advantages of Smart Power Distribution Unit Design for Automotive...
Unmanned Systems
Quiet, Please: NVH Improvement Opportunities in the Early Design...
