Latest Stories
INSIDER Aerospace
Air Force to Inspect KC-135 Fleet for Non-Conforming Tail Pins
The Air Force is directing inspections of KC-135 tanker aircraft for a non-conforming part in the vertical tail assembly. The Time Compliance Technical Order (TCTO) restricts...

News Manufacturing & Prototyping
Keeping Your Silicon Cool
Onboard electronics continue to evolve rapidly. Components are smaller. Systems are more complex. The sophisticated electronics components that make up modern vehicles require precision heat dissipation for...

News Mechanical & Fluid Systems
2022 Honda Civic Hatchback Enjoys Premium Assembly, Weight-Cutting Measures
As a veteran manufacturing engineer, Jill Fuel was an ideal choice for the project leader for the production launch of Honda’s 2022 Civic Hatchback at Honda's...

News Test & Measurement
SAE International Extends Call for Abstracts, Seeks Submissions for AeroTech Conference
Engineering Events staff at SAE International in Warrendale, Pennsylvania, have extended the call for abstracts through September 21 for the...

INSIDER Manned Systems
NASA Builds Welding Test Article for SLS Exploration Upper Stage
NASA completed manufacturing of a hydrogen tank barrel that will be tested as a weld confidence article for the Space Launch System (SLS) rocket’s Exploration Upper Stage...

Articles RF & Microwave Electronics
RF Technology Helps Connect Avionics Systems
A modular connector system provides smaller, lighter interconnections for denser, more tightly packed avionics systems.

Articles Materials
Using Open-Cavity Plastic Packages in Avionics Applications
See which methods can help semiconductors meet very tight time-to-market windows.

Products Test & Measurement
New Products
Single-board systems, self-encrypting drives, custom capacitor assemblies, and more.

Briefs Electronics & Computers
Novel Whisker Mitigating Composite Conformal Coat Assessment
DoD electronics have an increased failure risk due to tin whisker short circuits, unless properly mitigated by design.

News Communications
Quality Management Experts Provide Guidance on AS9100 Standard, Equipment Calibration
Quality management professionals across the global aerospace and defense community discuss the AS9100 international standard, audits, and equipment...

INSIDER Mechanical & Fluid Systems
Riveting Technology Enables Lightweight Magnesium Fasteners for Fuel Efficiency
If Rosie the Riveter had access to a new riveting technology, the erstwhile character of WWII fame could have worked faster and made lighter products. Today,...

Articles Electronics & Computers
Developing Thermoplastic Composites for Use in Commercial Aircraft
Thermoplastic composite materials (TPC) are gaining momentum for use in commercial airplanes and other aerospace applications, including electric vertical takeoff and landing (eVTOL) aircraft.

Articles Mechanical & Fluid Systems
Remanufacturing Reimagined: How Selective Electroplating Extends Service Life and Reduces the Cost of Aerospace Components
Selective brush plating has dramatically evolved from its origins of touching up existing plating jobs.

News Connectivity
Industry Invited to Participate in AeroTech Aerospace and Defense Technical Program
SAE International is inviting global participation in its AeroTech® aerospace and defense technology conference and exhibition, which is for the first...

Articles Electronics & Computers
Migrating Advanced Signal Processing Technology to Rugged SFF Platforms
By enabling distributed system architectures, SFF systems and subsystems solve many of the toughest problems facing embedded system designers.

Articles Mechanical & Fluid Systems
Pulse Plasma Nitriding for Aerospace Applications
Aerospace manufacturers who depend on nitriding components can benefit from greater uniformity of results, better-protected materials, and increased throughput.

Briefs Materials
MIL-DTL-32628/01-X Reusable EMI Shield Termination Band on MIL-DTL-38999 Electrical Connector Accessory Braid Termination/Tensile Qualification Test
A series of reusable bands were evaluated for tensile strength performance.

Products Unmanned Systems
New Products
Coaxial connectors, tactical servers, test benches, surge protectors, and more.

Articles Aerospace
Thermal Management Techniques in Avionics Cooling
Innovation is carrying airborne technologies farther and higher than ever before, and avionic cooling practices have had to evolve to keep up.

Application Briefs Materials
5-Axis Machining Center
Honeycutt Manufacturing made a major investment in a 5-axis universal machining center.

News Mechanical & Fluid Systems
Ford Details All-Electric F-150 Lightning
A day after a spirited mid-May drive by electric-vehicle (EV) proponent President Joe Biden, Ford revealed technical and market-focused details for the coming all-electric version of the F-150...

Products Electronics & Computers
New Products
4D radar sensors, edge databases, 3D simulation platforms, and more.

Articles Mechanical & Fluid Systems
A Comprehensive Way to Use Bonding to Improve RF Performance of Low Noise Amplifiers
Is RF engineering a form of black magic? Learn about the challenges in developing a low noise amplifier (LNA) for the aerospace market.

INSIDER Mechanical & Fluid Systems
Hinge Design Helps Quadrotors Climb
Army researchers invented a hinge that improves how quickly a quadrotor the size of a king-sized mattress can ascend from the ground to the rooftop of a two-story building, particularly with large...

Articles Mechanical & Fluid Systems
Increasing Innovation Efficiency with Additive Manufacturing
AM is a revolutionary technology that is changing the way that the aerospace industry is designing and producing parts.

Articles Manufacturing & Prototyping
Why Heat Exchanger Manufacturers Need to Rethink Design and Fabrication
Brazing isn't efficient, says an industry expert, and it's time for a change.

Articles Materials
Tips for Choosing CBN Grinding Wheels
Learn about the most common bond systems for CBN wheels: resin, vitrified, and electroplated matrixes.

Articles Mechanical & Fluid Systems
How Advanced Vacuum Bag Kits Streamline Composite Parts Manufacturing
The manufacturing of complex composite aerospace components is a labor-intensive process, especially the application of the vacuum bag layers needed for consolidation and cure.

Application Briefs Test & Measurement
Testing Services
Jamco America’s comprehensive dynamic test facility has an accelerator-type impact system.

Top Stories
INSIDERData Acquisition
University of Rochester Lab Creates New 'Reddmatter' Superconductivity Material...
INSIDERCommunications
MIT Report Finds US Lead in Advanced Computing is Almost Gone - Mobility...
INSIDERSensors/Data Acquisition
Airbus Starts Testing Autonomous Landing, Taxi Assistance on A350 DragonFly...
INSIDERManned Systems
Boeing to Develop Two New E-7 Variants for US Air Force - Mobility Engineering...
INSIDERWeapons Systems
PAC-3 Missile Successfully Intercepts Cruise Missile Target - Mobility...
INSIDERUnmanned Systems
Air Force Pioneers the Future of Synthetic Jet Fuel - Mobility Engineering...
Trending Stories
NewsPower
Volvo CE Previews ConExpo 2023 Display
ArticlesManufacturing & Prototyping
Low Distortion Titanium in Laser Powder Bed Fusion Systems
NewsPower
Webcasts
Manufacturing & Prototyping
How to Maximize the Benefits of Medical Device Onshoring
Electronics & Computers
Leveraging Machine Learning in CAE to Reduce Prototype Simulation...
Automotive
Driver-Monitoring: A New Era for Advancements in Sensor Technology
Electronics & Computers
Tailoring Additive Manufacturing to Your Needs: Strategies for...
Automotive
How to Achieve Seamless Deployment of Level 3 Virtual ECUs for...