Mechanical & Fluid Systems
Latest Stories
INSIDER Manufacturing & Prototyping
GKN Expands Production Line for Additive Fabrication of A220 Engine Component
GKN Aerospace announced the expansion of its Newington, Connecticut facility, bringing a new production line dedicated to additive fabrication of the Fan Case...
Articles Test & Measurement
Redefining Modern US Navy Shipbuilding with Additive Manufacturing
For suppliers, embracing AM isn’t just about swapping out tools; it’s about rethinking the entire design process. Working to understand and prepare for AM-driven design and qualification changes is necessary to remain competitive in future U.S. Navy shipbuilding programs. This article will explain how new standards are driving qualification, supporting U.S. Navy construction goals and fleet readiness.
Supplier Eye Energy
Looking Ahead to 2026
September is unofficially known in the industry as a key forecasting month. It’s when several suppliers lock in their revenue forecasts for the next year. As we approach 2026, there are still several balls in the...
Briefs Aerospace
A Twist in Topology Optimization Leads to High-Performing Heat Exchanger
By combining topology optimization and additive manufacturing, a team of University of Wisconsin-Madison engineers created a twisty high-temperature heat exchanger that outperformed a traditional straight channel design in heat transfer, power density and effectiveness. Read on to learn more.
Road Ready Mechanical & Fluid Systems
Driving the New Nissan Leaf Prototype
The first two-generations of the Leaf were about as exciting to drive as watching a slug inch its way across a sidewalk. Scratch that — at least a slug leaves a sparkly trail behind it. The Leaf,...
Articles Propulsion
48V Is Coming, and Not Just for EVs
In every corner of the automotive power engineering world, there are discussions and debates over the merits of 48V power networks vs. legacy 12V power networks. The dialogue started over 20 years ago,...
Original Equipment Power
Workhorse’s W56 Is the People’s Champ of Electrified Work Vans
ACT Expo 2025 had a fleet of new commercial-vehicle launches as well as displays for models already on the market. One such existing chassis was the Workhorse W56, an...
Technical Innovation Power
Schaeffler Optimizes Rolling Bearings for Hydraulic and Axle Drives
Rolling bearings with optimized friction and performance characteristics can have a significant influence on reducing the power loss, design envelope and weight of...
Original Equipment Motion Control
Komatsu Logs a New Timber Machine
Komatsu has announced a new swing machine designed to move large quantities of timber in log loader and millyard environments. The TimberPro TN785D is Komatsu’s most powerful and highest capacity machine...
News Mechanical & Fluid Systems
Rotax Keeps EV Development In-House
I've ridden the Can-Am electric motorcycles twice. Once in Texas, where it was punishingly hot, and once in Austria, where it rained all day. In both instances, the motorcycles performed as predicted,...
News Manufacturing & Prototyping
Surviving Nature’s Worst: Why IP Ratings Matter for Bevel Boxes in Harsh Environment
Some areas in the U.S. can average up to 70 inches (178 cm) of rainfall annually. In these conditions, it's essential that critical components like...
News Manned Systems
No Fear of Loading: Driving the 2025 Ram Heavy Duty
The desert landscapes of the western United States have changed since Mr. Duke and Dr. Gonzo blazed a trail across them in a drug-infused haze. But their advice to buy the ticket and take...
News Mechanical & Fluid Systems
Slate and SK Executives on Bringing the Inexpensive EV to Market
In May of 2024, Slate had an idea and a presentation. It knew it wanted to build an affordable vehicle and that the vehicle would be electric. "We were talking to many...
Articles Power
New Volvo D13 VGT Utilizes 24V Architecture
When Volvo revealed its all-new VNR regional haul truck in March 2025, it also marked the launch of something new under the hood: the Volvo D13 VGT (variable geometry turbo) engine. The new D13...
News Manned Systems
Tariff Challenges, EV Advances at Mobility 360
The 2025 edition of Taiwan’s 360 Mobility show featured companies promoting a wide range of automotive solutions, but the show didn’t quite feel the way it used to.
Technology Report Mechanical & Fluid Systems
SkillReal Signs Tier 1 Supplier for NVIDIA-Powered AI Inspection
AI inspection company SkillReal has signed a contract to supply its system to a major Tier 1 global supplier in addition to global OEMs and other suppliers already using the...
Q&A AR/AI
WCX 2025: Stellantis Design Chief Gilles Asks - What's Wrong with Diversity?
“It’s not rocket science,” Stellantis design chief Ralph Gilles said when asked about diversity at the leadoff keynote of WCX 2025 in Detroit.
Articles Manufacturing & Prototyping
Manufacturing Spotlight: Advanced Drilling, Threading and Milling Tools Maximize Productivity in Challenging Aerospace Materials
Before threading holes, drilling is a necessary and critical step. Drilling challenging aerospace materials demands an application-specific solution. Stainless, titanium, and nickel- based alloys are highly heat resistant so heat generated during the drilling process is pushed into the cutter. Read on to learn more.
INSIDER Manufacturing & Prototyping
Startup Develops Manufacturing Breakthrough for Traveling-Wave Tubes
Traveling-wave tubes (TWTs) are a type of vacuum tube critical for many high-performance applications, including deep space missions, satellites, and electronic warfare....
Technology Report Manufacturing & Prototyping
Case Study: Accuracy Is Key in AHP Hydraulics’s New Ball Joint Tester
Belgian solutions integrator AHP Hydraulics faced a certified stumper of a challenge from client SIDEM NV, which develops and produces automotive suspension and...
News Design
Lighter, Recyclable Body Seal from Cooper Standard Wins SAA Award
A lighter, colorable and fully recyclable thermoplastic body seal from Cooper Standard won the annual Innovations in Lightweighting Award given by the Society for Automotive...
INSIDER Unmanned Systems
New Commercial Drones and Components Added to Blue UAS Framework
After three days of flight demonstrations at the Blue UAS Challenge at Marine Corps Air Ground Combat Center 29 Palms, Service evaluators selected 23 platforms and 14 unique...
INSIDER Manufacturing & Prototyping
3D Printing Parts for Ships, Submarines and Underwater Vehicles
Additive manufacturing has been a game-changer in helping to create parts and equipment for the Department of Defense’s (DoD's) industrial base. A naval facility in...
INSIDER Test & Measurement
Can Microvanes Improve Fuel Efficiency for Legacy Air Force Aircraft?
Air Force Operational Energy and Air Mobility Command are entering the final phase of evaluation for Microvane drag reduction technology on the C-17 Globemaster III....
Articles Manufacturing & Prototyping
Manufacturing Spotlight: Machining Complex Parts and Materials for Space Flight and Exploration
This is the first article in a new section of Aerospace & Defense Technology called “Manufacturing Spotlight,” where we will cover some of the latest machines, tools, and other technologies being used by aerospace and defense industry design and manufacturing engineers. The first topic in this new section is “Machines,” specifically the computer numerical control machines. Read on to learn more.
Road Ready Power
2025 BMW M5 First Drive: Stuffed like Schnitzel with PHEV Tech
Before BMW designed its first in-house car, the 3/20 of 1932, the Bavarian manufacturer had built a reputation on lightness. The company’s air-cooled radial aircraft engines...
INSIDER Aerospace
How the Navy is Using Additive Manufacturing to Protect Submarine Hatch Bolts
Commander, Submarine Forces is researching the usage of additive manufacturing (AM) technology to address operational needs, in collaboration with midshipmen from...
Original Equipment Mechanical & Fluid Systems
Komatsu Employs “Slick” Battery Swapping for Underground LHD
Komatsu introduced its first battery-electric load-haul-dump (LHD) machine, the WX04B, at the MINExpo tradeshow in September. The WX04B is designed specifically for narrow...
News Power
Caterpillar Expands Family of Next-Gen Compact Track Loaders and Skid Steers
Caterpillar has released a cavalcade of new compact track loaders and skid steer loaders. The new CTL models include the 275, 275 XE, 285 and 285 XE. These models...
Top Stories
INSIDERManufacturing & Prototyping
NASA’s Quiet Supersonic Demonstrator Jet Completes First Flight
INSIDERDefense
AUSA 2025: The Army's New Anti-Vehicle Terrain Shaping Munition is Ready for...
INSIDERManufacturing & Prototyping
AUSA 2025: Secretary Driscoll Wants Army to Save Time and Money by 3D-Printing...
INSIDERDesign
Helsing Unveils New Autonomous Fighter Jet 'CA-1 Europa'
PodcastsManned Systems
Autonomous Targeting Systems for a New Autonomous Ground Vehicle
INSIDERAerospace
AUSA 2025: New CMOSS Chassis, Plug-in-Card Prototypes in Development for Army...
Webcasts
Software
Smarter Machining from Design to Production: Integrated CAM...
AR/AI
Software-Defined Vehicle Summit 2025
Automotive
Leveraging Augmented Reality and Virtual Reality to Optimize...
Aerospace
Vibroacoustic and Shock Analysis for Aerospace and Defense...
Energy
Vehicle Test with R-444A: Better-Performing R-1234yf Direct...
