Latest Stories

Application Briefs

Manufacturing & Prototyping

Digital Manufacturing Solution

The U.S. Navy is looking to tackle supply-line problems by aligning the skill sets of a trio of outside expert organizations to develop an end-to-end additive manufacturing (AM) system that could be utilized across the entire Department of Defense (DoD).

News

Software

2023 Cadillac Lyriq Executive Chief Engineer: New EV Her ‘North Star’

At the Cadillac Lyriq’s media drive program in Utah, SAE Media spoke one-on-one with Jamie Brewer, Lyriq executive chief engineer, about developing the...

Application Briefs

Defense

CAD-CAM-CNC System

Siemens Industry, Inc.
Munich, Germany
1-800-743-6367
www.siemens.com

DMG MORI manufactures a wide variety of conventional chip-cutting and ultrasonic machining centers for OEMs and production job shops...

News

Software

Addressing Electromagnetic Compatibility in the Context of Aircraft Electrification

In the current context of aircraft electrification, the aerospace industry needs to address increased design complexity and higher levels of integration,...

News

Manufacturing & Prototyping

Virtual Meets Mixed Reality for Vehicle Development

Automakers developing stand-alone technologies, such as driver-interface systems, will increasingly need to consider moving to a company-wide virtual model to create a digital twin of...

Articles

Software

Using Advanced Computational Engineering Software to Meet Aerospace & Defense Industry Challenges

Advanced computational engineering software and additive manufacturing are now delivering solutions that offer innovation and efficiency together.

Application Briefs

Test & Measurement

Reverse Engineering Technology

A company was retrofitting older avionics and needed a CAD model of the panel to see how it would fit.

Technology Report

Software

Multiphysics Helps Transform Modeling, Simulation

Modeling and simulation are showing no signs of slowing their expansion as critical elements of most design processes. Design software providers continue to advance tool capabilities,...

Application Briefs

Software

CAM Software

HyperMILL ® CAM software and 5-axis machining is being used to make parts for an advanced NASA satellite mission.

Briefs

Aerospace

Development and Verification of Body Armor Target Geometry Created Using Computed Tomography Scans

Previous methods of target geometry can be replaced by more accurate computer scanning technology.

News

Software

Embracing the Digital Transformation in Aerospace & Defense

The aerospace & defense (A&D) industry has always been known for great innovation and high expectations. Even during the difficult times with the impact of COVID-19,...

Articles

Software

Lightweight Design Beyond CAD

Automakers have been focused on lightweighting their vehicles for years, motivated by fuel economy, performance and safety. This engineering task is becoming increasingly difficult as the areas to trim...

News

Unmanned Systems

Origin of the Species

“I was a vehicle-dynamics engineer my entire career—but maybe not a good one, because they put me in charge of a self-driving car!” jokes Jason Fischer, chief engineer for the Cruise Origin, the autonomous...

News

Unmanned Systems

Roush Lands in AV Territory

Famous as an engineering-services company, a NASCAR racing icon, and the name behind many high-performance Ford cars and trucks, the Roush brand is a go-to for OEMs and suppliers needing projects executed on...

Articles

Software

A 'STEP' Forward for Product Lifecycle Management

CAD is constantly changing, which predicates the need for a solution to share validated and accurately translated data.

Technology Report

Software

Ford Demos Latest Digital Tools at Flagship Transmission Plant

Ford recently provided media with a look at some of its latest digital manufacturing tools, opening up the floor at one of the world’s largest transmission plants to...

News

Manufacturing & Prototyping

Honda Brings ‘Totalled’ SUV to Auto Show Floor to Highlight Latest Advances in Crash-Safety Engineering

Most of the gleaming product gracing auto shows has been meticulously prepared for public display. In an unusual move, Honda...

Briefs

Defense

Reusable Rapid Prototyped Blunt-Impact Simulator

Rapid prototyping (RP) is the term most commonly used to describe additive manufacturing technologies. An additive manufacturing technology is any manufacturing process that fabricates a part...

News

Software

Advanced Simulation Techniques Drive Powertrain Design

Commercial vehicle designers are using a variety of simulation and validation tools as they attempt to find new ways to improve many aspects of vehicle design. Engineers are working...

Articles

Unmanned Systems

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV)

Drone aircraft and their uses have been evolving quickly, supported by a great deal of ongoing research. One area of increasing interest is the decoy drone, designed to mimic the...

Articles

Software

Using the Full CAD-CAM-CNC Process Chain in Ultrasonic and Conventional 5-Axis Machining

DMG MORI manufactures a wide variety of conventional chip-cutting and ultrasonic machining centers for OEMs and production job shops serving the...

News

Manned Systems

Augmented, Mixed and Virtual Reality Transform Heavy-Vehicle Engineering

Augmented, mixed and virtual reality (AR, MR and VR) are everywhere. Over the past 12-18 months the number of new devices and apps being released has risen...

Articles

Mechanical & Fluid Systems

CAM Software Technology Keeps Pace with Aerospace Manufacturing Challenges

Aerospace industry component manufacturing is in a large growth cycle. Advancements to materials and engine efficiency have created clear benefits for replacing a...

Briefs

Robotics, Automation & Control

GPS Enabled Semi-Autonomous Robot

The primary objective of this research is to integrate GPS and local sensory data to allow a robot to operate semi-autonomously outside of a laboratory environment. The Pioneer 3-AT, a robust platform...

Articles

Mechanical & Fluid Systems

Quality Control for Additive Manufacturing Parts Using Non-Destructive Testing

Additive Manufacturing (AM) is growing in importance as a fabrication process for the space industry, enabling weight and cost savings through optimized designs...

Articles

Aerospace

Improving the Surface Finish of Additive Manufactured Parts

South West Metal Finishing has been working on an additive manufacturing surface treatment process for the last three years and believes it could be the future choice of aircraft...

Articles

Test & Measurement

Quality and Validation of Digital Designs for Aerospace and Defense

As aerospace and defense manufacturing becomes increasingly digitized—from the earliest design stages to the factory floor and beyond—data accuracy is fundamental to...

Articles

Defense

Using System Simulation to Manage Increasing Thermal Loads on Aircraft Fuel Systems

Today’s modern military fighter jets are like “a flying thermos bottle” according to Steve Iden, AFRL Invent Program Manager ^[1]. Many...

Articles

RF & Microwave Electronics

Designing Electronic Warfare to Regain Airborne Military Dominance

For decades, military aircraft have relied on electronic warfare (EW) solutions to protect assets and dominate airspace. The ability of the United States to detect and track...