Design & Simulation
Battery & Electrification
Manufacturing & Materials
Fluid Power & Motion Control
Test & Measurement
RF & Microwave
Electronics & Computers
Vehicles & Robotics
Imaging & Optics
Lasers & Photonics
As a veteran manufacturing engineer, Jill Fuel was an ideal choice for the project leader for the production launch of Honda’s 2022 Civic Hatchback at Honda's...
Short-haul airline flights can be a great convenience for travelers, but they produce more CO2 emissions – about 250 g/km per person – than any other form of passenger...
Drone-mounted inspection tools are breaking barriers for the F-35.
The flexible, self-healing coating protects buildings, bridges, and anything above or below the water made of steel.
Volvo Group partners with SSAB on ‘green steel’ for off-highway machines and with Ovako for access to fossil-free hydrogen.
Eddy current displacement sensors can make measurements in harsh Industrial environments, even where pressure, dirt, or temperature fluctuations occur.
Aerospace manufacturers who depend on nitriding components can benefit from greater uniformity of results, better-protected materials, and increased throughput.
Honda body-engineering presentations have become a much-anticipated highlight of the annual Great Designs in Steel (GDIS) conference in Michigan. Honda’s ‘ACE’ vehicle structures are...
An entire 20-story concrete building could store energy like a giant battery.
When engineering an upscale, 3-row Jeep SUV, the development spider charts must get pretty crowded. You’ll need lots of in-cabin technology and thoughtful features for the third-row family...
In the auto industry’s shift toward electric vehicles (EV), permanent magnet motors (PMMs) are increasingly serving a variety of roles, including the vehicle’s traction motor and various...
General Motors calls it a “beast,” a nickname that the 2022 GMC Hummer SUV earns on its numbers alone. Like the electric Hummer pickup, the SUV packs a propulsion system capable of...
Manufacturers of battery-electric commercial trucks have similar requirements for their battery enclosures as do their passenger-vehicle counterparts. Lightweight construction is very...
There is a new way to design penetrators and projectiles: Composites.
This can be used in energy-recovery systems in industrial, space, automotive, and military applications.
Genetic material is delivered without producing inflammation or toxicity in the body.
See how Blue Joule developed and delivered the Mini Mount (MM) Gimbal to Johns Hopkins University.
Developing lightweight, stiff and crash-resistant vehicle body structures requires a balance between part geometry and material properties. High-strength materials...
This method creates a thin-film electrode for a bio-nanobattery.
Not since Ford’s epic switch to aluminum for its F-Series body structures has an automaker’s materials strategy created such a buzz. Tesla’s decision to use stainless steel for its...
In the constantly evolving world of automaking, Dr. Karl Haider, Chief Commercial Officer of Tata Steel Europe (TSE) is certain of one thing: that steel will continue...
Learn why stainless steel fixtures and equipment are the best choice for high-traffic and high use installations.
The coating protects parking decks, bridges, concrete piers, offshore platforms, buildings, and cooling towers.
Altering the traditional intensity distribution of fiber lasers improves weld quality.
Multifunctional iron nanowires selectively obliterate cancer cells with a triple-punch combination attack.
This process turns carbon dioxide into carbon nanotubes with small diameters.
Load-bearing structures in cars and airplanes could be manufactured from the metal foam.
When combined with saltwater, rust can be a source of electricity.
Biologics and personalized medicine are increasingly becoming more popular — causing the biomanufacturing industry to change. Instead of sticking to large-scale production...
Northrop Grumman to Unveil the B-21 Raider - Mobility Engineering Technology
Raytheon Pairs Laser Weapon with NASAMS Air Defense System - Mobility...
All-Electric Commuter Aircraft Makes Maiden Flight - Mobility Engineering...
Air Force Explores Use of Thermoplastic Fin for F-16 - Mobility Engineering...
Oscillating Heat Pipes Tested for Use in Space - Mobility Engineering Technology
Navy Gets Integrated Multi-Mission Laser Weapon System - Mobility Engineering...
Air Force Pioneers the Future of Synthetic Jet Fuel
The Internal-Combustion Engine’s Next Phase: Innovations and...
Safety and Efficiency With Vehicle Motion Control
Design and Simulation of Sustainable, High-Performance Thermal...
How to Analyze Spacecraft Thermal Performance with COMSOL®
Advanced Solutions to Increase Range Capabilities and Reduce Cost...
Developing the Ultimate Medical Sensor Technology