Design & Simulation
Battery & Electrification
Manufacturing & Materials
Fluid Power & Motion Control
Test & Measurement
RF & Microwave
Electronics & Computers
Vehicles & Robotics
Imaging & Optics
Lasers & Photonics
Engineering Events staff at SAE International in Warrendale, Pennsylvania, have extended the call for abstracts through September 21 for the...
The critical role of spectrum superiority in the success of battlefield campaigns is evidenced by the enormous investments being made in electronic warfare (EW)...
Pulse shaping, as it is done today, is an effort to fix fidelity issues caused by the transmitting amplifier and is accomplished by a combination of imperfect methods, most external to the amplifier. This article...
A modular connector system provides smaller, lighter interconnections for denser, more tightly packed avionics systems.
The Explosive Ordnance Disposal jamming unit supports bomb disposal squads.
In the current context of aircraft electrification, the aerospace industry needs to address increased design complexity and higher levels of integration,...
Spectrum monitoring can detect signs of threats and provide insight into mitigating them.
SAE International is inviting global participation in its AeroTech® aerospace and defense technology conference and exhibition, which is for the first...
By enabling distributed system architectures, SFF systems and subsystems solve many of the toughest problems facing embedded system designers.
As radar and electronic warfare systems contend with an increasingly crowded environment, recording tests, interactions, and conflicts provide valuable insight.
The use of CA, MIMO, and beamforming technologies will lead to more antennas and radio ports that need to be tested.
Applying an iterative solution to the Maxwell equations may accommodate the nonlinear effects produced by directed energy weapons.
Radios are a staple of naval operations but their standards must change to keep up with the times.
Drones are useful technology; however, some seek to exploit the technology with bad intent.
Is RF engineering a form of black magic? Learn about the challenges in developing a low noise amplifier (LNA) for the aerospace market.
After years of transportation-industry tussle over competing technologies to enable communications between vehicles and a “connected” environment, the...
Channelization has made it possible to use one radio receiver to listen to many different radio stations simultaneously.
For SOSA/HOST systems, there are chassis platforms for development that provide relatively cost-effective, versatile, and powerful solutions.
A phenomenon called “Sporadic E” naturally occurs in the upper atmosphere and disrupts radio waves.
See the trends today that are helping satcom design engineers meet the data demands of their military and aerospace clients.
Army scientists have developed a first-of-its-kind antenna that could change how ground vehicles and airborne systems communicate, transmit, and receive radio frequency communications.
Learn about design considerations for manufacturing a battery pack that operates in extreme temperatures, absorbs shock and vibration, and maintains a watertight seal.
A key building block of microwave photonics is optical frequency combs, which provide hundreds of equidistant and mutually coherent laser lines.
Wireless communications is a broad market and PAs fill a wide array of those applications.
In many applications, conventional filters fall short.
The MPM has uses in military aerospace applications.
Conventional reconfigurable electrical and radio frequency (RF) structures commonly used in applications involving real-time reconfigurability in response to fast varying...
A centralized IMA approach offers several advantages.
Once firmly rooted in its analog origins, critical communications is now steadily evolving to provide enhanced situational awareness. The latest public safety and military communications...
B-21 Raider Passes First Loads Calibration Test
Collins Aerospace Completes Preliminary Design of 1MW Electric Motor
A New Approach to Counter-UAS Technology - Mobility Engineering Technology
Air Force and Lockheed Martin Complete ARRW Hypersonic Boosted Test Flight
Oscillating Heat Pipes Tested for Use in Space - Mobility Engineering Technology
Rocket Factory In-A-Box Missile Propulsion Anytime, Anywhere
Electronically Dimmable Aircraft Windows
Full-Field Optical Strain Measurement Systems for Materials and Structures...
Advances in Unmanned Aircraft: AI and Autonomy – Threats, Countermeasures,...
When Milliseconds Count: The Impact of Adaptive Lidar on...
Sensors Rated for Cryogenic Measurements
Product Development Lifecycle Management: Optimizing Quality,...
The Benefit of End-to-End EV Charging-Component Product...