Non-Destructive Evaluation of Structures Using Transient and Lock-in Thermography
Applications include avionics, data storage, process control, reconfigurable manufacturing lines, and civil and structural engineering.
Researchers at NASA Johnson improved their flash thermography capabilities by incorporating transient and lock-in thermography to their flash thermography NDE technology. This non-destructive evaluation (NDE) technology identifies flaws in materials used in airplanes, drones, and buildings.
By adding the transient thermography method, which detects flaws on thicker parts faster than other methods, and the lock-in thermography method, which uses a sinusoidal power cycle to provide a better flaw resolution, the flash thermography NDE technology suite has expanded its applicability to other commonly used infrared thermography techniques.
When using the transient and lock-in methods to evaluate materials, variations in the thermal diffusivity of the material manifest themselves as anomalies in the infrared (IR) image of the test surface. Both methods are specifically used to analyze thicker material than is possible by flash thermography alone. Post-processing of this raw IR camera data provides detailed analysis of the size and characterization of anomalies.
This technology includes a software that offers highly precise measurements.
The peak contrast and peak contrast time profiles generated through this tool provide quantitative interpretation of the images including detailed information about the size and shape of the anomalies. The persistence energy and persistence time profiles provide highly sensitive data for detected anomalies. Peak contrast, peak time, persistence time, and persistence energy measurements also enable monitoring for flaw growth and signal response to flaw size analysis.
This technology provides more comprehensive, detailed, and accurate NDE detection and characterization of subsurface defects in nonmetallic composite materials than current methods. This complete software suite normalizes and calibrates the data, which provides more stable measurements and reduces the occurrence of errors due to operator and camera variability.
NASA is actively seeking licensees to commercialize this technology. Please contact NASA’s Licensing Concierge at
Top Stories
INSIDERManned Systems
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERMaterials
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERImaging
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
INSIDERManned Systems
Stratolaunch Approaches Hypersonic Speed in First Powered TA-1 Test Flight -...
INSIDERUnmanned Systems
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
ArticlesEnergy
Can Solid-State Batteries Commercialize by 2030? - Mobility Engineering...
Webcasts
AR/AI
From Data to Decision: How AI Enhances Warfighter Readiness
Energy
April Battery & Electrification Summit
Manufacturing & Prototyping
Tech Update: 3D Printing for Transportation in 2024
Test & Measurement
Building an Automotive EMC Test Plan
Manufacturing & Prototyping
The Moon and Beyond from a Thermal Perspective
Software
Mastering Software Complexity in Automotive: Is Release Possible...