Active Flow Control System for Simple-Hinged Flaps
The system represents a breakthrough in flow separation control technology to efficiently achieve necessary lift performances while requiring low pneumatic power.
Conventional high-lift systems allow transport aircraft to safely operate at low speeds for landing and takeoff. These high-lift devices, such as Fowler flaps, are complex, heavy, and have high part counts. Fowler flap mechanisms also protrude externally under the wings, requiring external fairings, which increase cruise drag. Simple-hinged flaps are less complex, and an ideal choice for low-drag cruise efficiency. However, simple-hinged flaps require high flap deflections to achieve lift comparable to Fowler flaps. These flap deflections cause severe adverse pressure gradients, which generate flow separation that is difficult to control. In response to these challenges, NASA developed the High Efficiency Low Power (HELP) active flow control (AFC) system.
Although simple-hinged flaps represent optimal high-lift systems for reducing cruise drag, previous attempts to design flow control systems enabling such technology in transport aircraft have been unsuccessful. This is largely because such systems generally require a tradeoff between (a) the ability to achieve the required lift performance, and (b) possessing sufficiently low pneumatic power to enable feasible aircraft system integration (i.e., avoiding excess weight penalties associated with high pneumatic power).
NASAs HELP AFC system represents a breakthrough in flow separation control technology to efficiently achieve necessary lift performances while requiring low pneumatic power relative to alternative flow control techniques. It uses a unique two-row actuator approach comprised of upstream sweeping jet (SWJ) actuators and downstream discrete jets, which share the same air supply plenum. The upstream (row 1) SWJ actuators provide good spanwise flow-control coverage with relatively mass flow, effectively pre-conditioning the boundary layer such that the downstream (row 2) discrete jets achieve better flow control authority.
The two-row actuator system, working together, produce a total aerodynamic lift greater than the sum of each row acting individually. The result is a system that generates sufficient lift performance for simple-hinged flaps with pneumatic power requirements low enough to enable aircraft integration.
This simple, elegant invention can control flow separation resulting from the high flap deflections required by simple-hinged flap systems making such flaps a viable option for aircraft designers. Aircraft with simple-hinged flap systems will achieve reduced cruise drag, thereby increased fuel efficiency.
NASA is actively seeking licensees to commercialize this technology. Please contact NASA’s Licensing Concierge at
Top Stories
INSIDERManned Systems
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERMaterials
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERImaging
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
INSIDERManned Systems
Stratolaunch Approaches Hypersonic Speed in First Powered TA-1 Test Flight -...
INSIDERUnmanned Systems
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
ArticlesEnergy
Can Solid-State Batteries Commercialize by 2030? - Mobility Engineering...
Webcasts
AR/AI
From Data to Decision: How AI Enhances Warfighter Readiness
Energy
April Battery & Electrification Summit
Manufacturing & Prototyping
Tech Update: 3D Printing for Transportation in 2024
Test & Measurement
Building an Automotive EMC Test Plan
Manufacturing & Prototyping
The Moon and Beyond from a Thermal Perspective
Software
Mastering Software Complexity in Automotive: Is Release Possible...