Design Treatment for Advanced Metals Enables Easier Machining
This method applies a surface-active agent to the surface of a metal to make it easier to cut and shape the material into parts and pieces.
Exotic and advanced metals are used in aircraft, orthopedic components, medical instruments, cars, solar panels, military equipment, and other applications. They are referred to as advanced or exotic because they are more difficult to find and more costly to use in manufacturing.
The conventional method of using advanced metals in manufacturing is high in cost, in part because they tend to be difficult to sculpt. A new process was developed for cutting these metals that may help make them easier to use and lead to significant changes in the future of manufacturing.
The method involves applying a designer surface-active agent — the name for a variety of chemicals used in metals processing — to the surface of a metal to make it easier to cut and shape the material into parts and pieces. Common alcohols were used on an aluminum surface to cut the metal more easily with at least 50 percent less force and produce a smoother end surface with fewer cracks and tears compared with aluminum without the alcohol treatment.
The same approach shows promise for other metal systems such as stainless steel, tantalum, copper, iron, and even nickel alloys. Each metal system requires a specific designer agent since alcohols do not interact with other metals in the same way they do with aluminum.
For more information, contact the Office of Technology Commercialization at
Top Stories
INSIDERManned Systems
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERMaterials
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERImaging
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
INSIDERManned Systems
Stratolaunch Approaches Hypersonic Speed in First Powered TA-1 Test Flight -...
INSIDERUnmanned Systems
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
ArticlesEnergy
Can Solid-State Batteries Commercialize by 2030? - Mobility Engineering...
Webcasts
AR/AI
From Data to Decision: How AI Enhances Warfighter Readiness
Energy
April Battery & Electrification Summit
Manufacturing & Prototyping
Tech Update: 3D Printing for Transportation in 2024
Test & Measurement
Building an Automotive EMC Test Plan
Manufacturing & Prototyping
The Moon and Beyond from a Thermal Perspective
Software
Mastering Software Complexity in Automotive: Is Release Possible...