Breathable Electronics for Wearable Technologies
The material was designed specifically for biomedical or wearable technologies, since sweat and volatile organic compounds evaporate away from the skin.
Engineering researchers have created ultrathin, stretchable electronic material that is gas-permeable, allowing the material to “breathe” and making it more comfortable for users — especially for long-term wear.
The researchers used a technique called the breath figure method to create a stretchable polymer film featuring an even distribution of holes. The film is coated by dipping it in a solution that contains silver nanowires. The researchers then heat-press the material to seal the nanowires in place.
The resulting film shows an excellent combination of electric conductivity, optical transmittance, and water-vapor permeability. Because the silver nanowires are embedded just below the surface of the polymer, the material also exhibits excellent stability in the presence of sweat and after long-term wear.
The end result is extremely thin — only a few micrometers thick — enabling better contact with the skin and giving the electronics a better signal-to-noise ratio. The gas permeability is important for more than just comfort. If a wearable device is not gas-permeable, it can also cause skin irritation.
To demonstrate the material’s potential for use in wearable electronics, the researchers developed and tested prototypes for two representative applications. The first prototype consisted of skin-mountable, dry electrodes for use as electrophysiologic sensors. These have multiple potential applications such as measuring electrocardiography (ECG) and electromyography (EMG) signals. The sensors were able to record signals with excellent quality on par with commercially available electrodes.
The second prototype demonstrated textile-integrated touch sensing for human-machine interfaces. The researchers used a wearable textile sleeve integrated with the porous electrodes to play computer games.
For more information, contact Matt Shipman at
Top Stories
INSIDERManned Systems
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERMaterials
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERImaging
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
INSIDERManned Systems
Stratolaunch Approaches Hypersonic Speed in First Powered TA-1 Test Flight -...
INSIDERUnmanned Systems
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
ArticlesEnergy
Can Solid-State Batteries Commercialize by 2030? - Mobility Engineering...
Webcasts
AR/AI
From Data to Decision: How AI Enhances Warfighter Readiness
Energy
April Battery & Electrification Summit
Manufacturing & Prototyping
Tech Update: 3D Printing for Transportation in 2024
Test & Measurement
Building an Automotive EMC Test Plan
Manufacturing & Prototyping
The Moon and Beyond from a Thermal Perspective
Software
Mastering Software Complexity in Automotive: Is Release Possible...