Getting a Grip on EV Fasteners
TR Fastenings thinks the industry needs innovative EV fasteners and coatings.
It may not get much R&D fanfare, but fastenings and their coatings will play an essential engineering role in electrified vehicles (EVs). There is an increasing demand from the auto industry for innovative fastener engineering techniques to be applied throughout the design and manufacturing process. “Fastening innovations are crucial for EV and EV battery (EVB) manufacturers,” said Sven Brehler, engineering project manager at TR Fastenings.
Particularly relevant for EVB assembly according to Brehler are fasteners with electrically isolating coatings; lightweight, non-magnetic fasteners; battery retention bolts; cable management hardware; and compression limiters. All require robust and secure settings for the costly battery. Fasteners are also essential in charging units, battery casings and general infrastructure equipment.
According to Brehler, an EV’s battery module can be secured with plastic inserts. Designed to incorporate various coatings, inserts are fitted into the plastic during the injection-molding process. “Component suppliers are beginning to work closely with battery module manufacturers,” Brehler explained, “to develop and apply coatings which protect the inserts from corrosion to maintain good electrical connectivity or retain isolation where needed to avoid unwanted electrical resistance or potential short circuits.”
Along with the materials used in battery casings and structures, varying conditions must be considered when applying coatings, and there’s no single solution. "Many coatings and parts need to act as conductors to move electricity and current around the battery to ensure it reaches the right destination,” Brehler said, “with minimum resistance causing potential hotspots."
Managing battery heat
Brehler explained that conductive coatings can be applied to materials such as plastic fasteners or fasteners prone to corrosion. An increase in resistance increases losses and generates heat. “EV batteries can generate high levels of heat, so it’s essential that it is distributed over the assembly to provide general cooling and avoid localized overheating,” Brehler noted. “Busbars can support the distribution of heat from local hotspots to heat sinks when correctly tightened to optimize heat transfer between the various elements. Using fasteners with thermally and electrically conductive coatings will aid an effective service life.”
Insulating coatings are used to stop electricity from going where it shouldn’t. Specific coatings include PTFE (polytetrafluoroethylene) because it is highly heat resistant, able to retain its properties across a temperature range from -200 to 260°C (-328 to 500°F). “It also has low predictable friction,” Brehler said, “which can help to create secure joints through torque control essential when assembling the battery module.”
Plasma spray or High Velocity Oxygen Fuel (HVOF) spray techniques used in the aerospace and defense industries (facilitating lightweight materials while still maintaining hard, heat resistant and easily polished surfaces), are now being adopted by engineers within the auto industry to help solve specific challenges. Particularly in application to fasteners, Brehler noted this is a demonstration of the use of “sophisticated and advanced solutions to deliver efficiency and safety.”
Top Stories
INSIDERManned Systems
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERMaterials
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERImaging
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
INSIDERManned Systems
Stratolaunch Approaches Hypersonic Speed in First Powered TA-1 Test Flight -...
INSIDERUnmanned Systems
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
ArticlesEnergy
Can Solid-State Batteries Commercialize by 2030? - Mobility Engineering...
Webcasts
AR/AI
From Data to Decision: How AI Enhances Warfighter Readiness
Energy
April Battery & Electrification Summit
Manufacturing & Prototyping
Tech Update: 3D Printing for Transportation in 2024
Test & Measurement
Building an Automotive EMC Test Plan
Manufacturing & Prototyping
The Moon and Beyond from a Thermal Perspective
Software
Mastering Software Complexity in Automotive: Is Release Possible...