Marvin Test Solutions Tailors GX3800e PXI Express FPGA Module for Test, Automation, Instrumentation Engineering

Marvin Test Solutions expands user-programmable PXIe FPGA product line, leverages VITA 57 FMC interface with GX3800e.

Marvin Test Solutions Inc., a global provider of test solutions for aerospace , defense, and manufacturing, in Irvine, California, is introducing its GX3800e High Performance PXI Express field-programmable gate array (FPGA ) module, designed to offer engineers the flexibility to develop high-performance, customized digital and mixed signal instrumentation for specific applications without the use of external interface cards.

“The broad adoption of user-programmable FPGAs for test and measurement  applications has allowed test engineers to create custom instrumentation and interfaces for complex, mission-critical applications from the flight line  to the factory,” Major General Stephen T. Sargeant, USAF (Ret.), CEO of Marvin Test Solutions, explains. “With the addition of the GX3800e which leverages commercial off-the-shelf (COTS) FMC modules and industry-standard IP cores and programming tools, our customers can realize a streamlined design process, long-term supportability, and the flexibility to adapt to future test needs.”

The GX3800e employs the Altera Cyclone V FPGA, which supports data rates up to 3.125 Gb/s and features over 300,000 logic elements and 12.2 Kb of user memory.

The GX3800e uses a daughter card for the I/O physical layer and these cards can be commercial off the shelf VITA 57 FPGA Mezzanine Card (FMC) modules, MTS’ line of daughter cards, or user-designed cards. This approach facilitates the integration of many applications and interfaces including A to D, D to A, Camera Link, FPDP, and high-speed serial using a single PXIe slot. The design of the FPGA is done using Altera’s Quartus or the license-free Quartus Prime Lite tool set, officials say.

The user FPGA’s interface to the PXIe bus is partitioned via an internal address and data bus, which is accessed via predefined registers and supported by the module’s software driver and an interactive user interface. The PXIe bus interface and associated software driver are known and tested, helping simplify design and integration processes, officials say. The compiled FPGA design can be loaded into on-board flash memory via this same interface, providing an easy way to incrementally design, test, or modify FPGA code.

PCI eXtensions for Instrumentation (PXI), an adaptation of PCI Express to the PXI form factor, is a modular electronic instrumentation platform used as a basis for developing electronic test equipment, automation systems, and modular laboratory instruments. PXI Express enables the use of hybrid slots compatible with PXI and PXI Express modules; National Instruments  in 2015 extended the standard to use PCI Express 3.x, increasing the system bandwidth to 24 gigabytes.

Working on aerospace systems and platforms? Wrestling with challenges? Using a novel tool or process, or need one? Have aerospace wisdom or other insights to share for the greater good of the industry? You're invited to get involved with SAE International -- contact This email address is being protected from spambots. You need JavaScript enabled to view it. and add your voice to the growing body of mobility engineering knowledge.

Courtney E. Howard  is editorial director and content strategist at SAE International, Aerospace Products Group. Contact her by e-mail at This email address is being protected from spambots. You need JavaScript enabled to view it..