GA-ASI Maximizes Fuel Capacity for MQ-25 Entry
The integrated fuel tank structure improves fuel carriage and delivery capacity for General Atomics’ entry in the MQ-25 competition
General Atomics Aeronautical Systems, Inc. (GA-ASI) of Poway, Calif. is using an integrated fuel tank structure to maximize fuel offload for the company’s proposed MQ-25 design for the U.S. Navy.
The MQ-25 “Stingray” unmanned, carrier-based, aerial refueling aircraft is an unmanned combat aerial system (UCAV) that the Navy plans to field by the early- to mid-2020s. While the MQ-25 will mainly serve as an aerial refueling platform for Navy aircraft, it is likely that the chosen entry will also possess limited intelligence, surveillance, and reconnaissance (ISR) capabilities.
In October 2017, the Navy released the final request for proposals for the MQ-25. At the time, the main competitors were Boeing , General Atomics, Lockheed Martin , and Northrop Grumman ; although, Northrop Grumman withdrew from the competition at the end of October 2017.
GA-ASI’s MQ-25 design – dubbed the Sea Avenger – is based on an enlarged version of their Predator C Avenger long-endurance, medium-to-high-altitude remotely piloted aircraft (RPA) system.
GA-ASI applied its knowledge of advanced composite aircraft structures to develop integrated fuel tanks in a large-scale wing box test article and a full-scale wing skin pre-production validation article.
The wing box tested to failure via wing bending at GA-ASI’s Adelanto, Calif. structural test facility last year. In April, the company verified the production readiness of the co-cured wing and tail components using both non-destructive and destructive inspections.
“The integral fuel tank wing box test article will reduce technical and schedule risk for the program,” said David R. Alexander, president of aircraft systems at GA-ASI. “Specifically, through extensive validation of fuel containment sealing methods, advanced non-linear buckling finite element analysis models and thick composite laminate construction, we have accelerated engineering design consideration prior to the detail design phase and production.”
A full-scale inner-wing skin demonstration article built in March at GA-ASI’s Spanish Fork, Utah facility verified the MQ-25 tooling concepts, lamination approach, and processes. The team validated the outer mold line tooling approach for the build process which enables accelerated engineering and tooling fabrication for the MQ-25 program.
GA-ASI’s Predator C-based wing-body-tail design will compete against two flying wing designs: Lockheed Martin’s RQ-170 Sentinel-based prototype and an iteration of the Boeing Phantom Ray .
William Kucinski is content editor at SAE International, Aerospace Products Group in Warrendale, Pa. Previously, he worked as a writer at the NASA Safety Center in Cleveland, Ohio and was responsible for writing the agency’s System Failure Case Studies. His interests include literally anything that has to do with space, past and present military aircraft, and propulsion technology.
Contact him regarding any article or collaboration ideas by e-mail at
Top Stories
INSIDERManned Systems
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERMaterials
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERImaging
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
INSIDERManned Systems
Stratolaunch Approaches Hypersonic Speed in First Powered TA-1 Test Flight -...
INSIDERUnmanned Systems
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
ArticlesEnergy
Can Solid-State Batteries Commercialize by 2030? - Mobility Engineering...
Webcasts
AR/AI
From Data to Decision: How AI Enhances Warfighter Readiness
Energy
April Battery & Electrification Summit
Manufacturing & Prototyping
Tech Update: 3D Printing for Transportation in 2024
Test & Measurement
Building an Automotive EMC Test Plan
Manufacturing & Prototyping
The Moon and Beyond from a Thermal Perspective
Software
Mastering Software Complexity in Automotive: Is Release Possible...