Tailoring the Optoelectronic Properties of Transition Metal Dichalcogenides for Sensing and Electronics
A team of Air Force Research Laboratory, or AFRL, researchers partnered with Pennsylvania State University to publish an article in the February 2023 issue of the prestigious scientific journal ACS Nano.
The publication highlights an innovative method for manipulating and tailoring the optoelectronic properties of transition metal dichalcogenides, or TMDs, a specific class of two-dimensional layered materials essential for developing emerging sensing and electronic technologies. The research team’s findings have potential future applications for both the Department of the Air Force and the commercial market, said Dr. Rahul Rao, a research group leader in AFRL’s Materials and Manufacturing Directorate.
“Anywhere you might expect to see electronics in the future, you could find these materials,” Rao said. “This research has potential implications for use in quantum devices, satellite communications, aircraft, biosensing, vapor sensing. We wanted to be able to modify and control the properties of [TMDs] in order to know exactly what they can do so that we can make these devices.”
TMDs are comprised of ultrathin, two-dimensional layers of transition metals and chalcogenides — specific classes of elements found on the periodic table — that are only three atoms thick, said Dr. Ryan Selhorst, Lead Author and Research Scientist in AFRL’s Materials Development section of the Polymers and Specialty Materials branch.
Researchers used the focused, high-energy electron beam from a scanning electron microscope in a water vapor environment to create gentle chemical reactions on the surface of the TMDs. This process can be used to create high precision patterns, Selhorst said. The method chemically alters the TMDs’ structure and modulates their optoelectronic properties.
Functionalization is a process by which researchers add organic chemical functional groups, which are specific groupings of atoms within molecules with their own characteristic properties, to the TMDs, altering the thermal and optical properties of the material to be harnessed for use in sensing and other technologies.
Traditionally, scientists have used an intricate, time-consuming process called lithography to alter the electronic and optical properties of TMDs, Selhorst said. However, it can take researchers days or even weeks working in a tightly controlled, sanitary environment to complete the task.
“Traditional lithography is the basis of modern electronics. Researchers have worked for decades to get this kind of precision down,” Selhorst said. “But it is a multistep procedure. Your outcome relies heavily on the purity of the chemicals and the cleanliness of the room. You need pristine conditions, cleanroom suits — it’s a whole other ballgame.”
The method developed by Rao and Selhorst’s team alleviates the sanitation concerns and the need for multiple complex steps, Selhorst said.
“Using [our] process, you can generate any pattern that you would like, down to a resolution of 60 nanometers,” Selhorst said. “I can go in and do this whole procedure in roughly an hour, maybe a few hours at most.”
According to its webpage, ACS Nano publishes only original research that presents an advance of immediate, broad and lasting impact in the chemistry, physics, materials science, biology and engineering fields. Its impact factor — a universal ranking used to gauge the international reach and influence of peer-reviewed scientific journals — was approximately 18 in 2021.
Rao said the scientific community generally views any ranking above 10 as notable.
“ACS Nano carries a lot of weight, particularly in the Materials Science community,” Selhorst said. “When researchers get published there, that’s a solid indicator that they’ve accomplished some significant scientific work. It’s pretty hard not to feel ecstatic about that.”
TMD research is a relatively new field that has only been active for about 10 years, said Rao.
“Research like this is always such a collaborative effort,” Selhorst said. “This whole project, the publication — none of it would have happened without [the entire team].”
Additional contributors from the AFRL Materials and Manufacturing Directorate’s Photonic, Electronic and Soft Matter Materials Division included researchers David Moore, Dr. Jie Jiang, Dr. Michael A. Susner, Dr. Nicholas R. Glavin, Dr. Ruth Pachter and Dr. Benji Maruyama. Zhuohang Yu and Dr. Mauricio Terrones from Pennsylvania State University’s Department of Materials Science and Engineering also contributed to the publication.
“Research teams sometimes can work as these incredibly well-oiled machines where everything just fits so perfectly into place,” Selhorst said. “This was one of those times. In simply doing our jobs, we created something absolutely astounding.”
Check out the full publication here: https://pubs.acs.org/doi/10.1021/acsnano.2c11503
University of Rochester Lab Creates New 'Reddmatter' Superconductivity Material...
Air Force Completes First Magnetic Navigation Flight on C-17 - Mobility...
Air Force Performs First Test of Microwave Counter Drone Weapon THOR - Mobility...
MIT Report Finds US Lead in Advanced Computing is Almost Gone - Mobility...
Navy Selects Lockheed Martin and Raytheon to Develop Hypersonic Missile -...
Boeing to Develop Two New E-7 Variants for US Air Force - Mobility Engineering...
Accelerate Software Innovation Through Target-Optimized Code...
Manufacturing & Prototyping
How Metal Additive Manufacturing Is Driving the Future of Tooling
Electronics & Computers
Microelectronics Data Security: Better with Formal Methods
Solving Complex Thermal Challenges of Today’s Space Market
Traction-Motor Innovations for Passenger and Commercial Electric...
Air Force Performs First Test of Microwave Counter Drone Weapon THOR
Single Event Effects in High Altitude Aerospace Sensor Applications