Army Develops Technology to Intercept Drones
As drone technology gains greater public attention, along with its potential for hostile action against American targets, Army engineers are adapting ongoing research to counter aerial systems that could threaten soldiers. At Picatinny Arsenal, the Extended Area Protection and Survivability Integrated Demonstration (EAPS ID) began as an Army Technology Objective program. The goal was to develop and demonstrate technology, which could support a gun- based solution to counter rockets, artillery and mortars (C-RAM). Research into enhanced C-RAM technology had the goal of extending the range and probability of success against the incoming threat.
"The smaller and smaller the protective area, the more efficient the gun systems become compared to missiles," said Manfredi Luciano, the project officer for the EAPS system. "You don't need as many, and the gun system has certain logistics advantages."
As news reports about potential airborne threats to the White House have stirred public awareness of such threat to U.S. interests, ongoing technology aimed at countering rockets, artillery and mortars could be used to defend against unmanned aerial systems (UAS), Luciano said. The UAS challenge has grown exponentially in the last decade as the world's inventory of Unmanned Aircraft Systems has grown from approximately 20 system types and 800 aircraft in 1999, to more than 200 system types and approximately 10,000 unmanned aircraft in 2010, said Nancy Elliott, a spokeswoman with the U.S. Army's Fires Center of Excellence on Fort Sill, Oklahoma.
Although a missile-based C-RAM defense system has been selected as the technical approach for the Indirect Fire Protection Capability Increment 2 Intercept Program of Record, the gun alternative continued to mature as force-protection technologies for other potential applications. In response to proliferation, UAS threats recently were added to the project scope of gun-based force protection.
Luciano and his team, working on enhanced area protection and survivability, tested an integrated a system recently by shooting down a class 2 unmanned aerial system using command guidance and command warhead detonation at Yuma Proving Ground, Arizona. Funding for development and testing was provided by the U.S. Army Armament Research, Development and Engineering Center, or ARDEC, Technology Office.
The EAPS ARDEC gun alternative envisions a 50mm cannon to launch command guided interceptors. The system uses a precision tracking radar interferometer as a sensor, a fire control computer, and a radio frequency transmitter and receiver to launch the projectile into an engagement "basket."
"In order to minimize the electronics on board the interceptor and to make it cheaper, all the 'smarts' are basically done on the ground station," Luciano said. "The computations are done on the ground, and the radio frequency sends the information up to the round."
The Picatinny area-protection systems track both the incoming threat and interceptor, then compute an ideal trajectory correction for the interceptor to maximize probability of mission success. A thruster on the interceptor/projectile is used for course correction. The ground station uplinks the maneuver and detonation commands while receiving downlinked assessment data. The interceptor takes the commands and computes the roll orientation and time to execute thruster and warhead detonation. The warhead has a tantalum-tungsten alloy liner to form forward propelled penetrators for defeat of C-RAM targets, and steel body fragments to counter unmanned aerial systems.
The recent test was performed with a single shot Mann barrel. The UAS was flying a surveillance-type track and was engaged on the approach path leg. The airplane fell precipitously from its flight. The integrated test demonstrated a proof-of-principle that direct fire, command guided ammunition can intercept and negate aerial threats, Luciano said. Technologies from the EAPS gun alternative Army Technology Objective may potentially be used for both Army and Navy air defense systems, he added.
Top Stories
INSIDERManned Systems
Turkey's KAAN Combat Aircraft Completes First Flight - Mobility Engineering...
INSIDERMaterials
FAA Expands Boeing 737 Investigation to Manufacturing and Production Lines -...
INSIDERImaging
New Video Card Enables Supersonic Vision System for NASA's X-59 Demonstrator -...
INSIDERManned Systems
Stratolaunch Approaches Hypersonic Speed in First Powered TA-1 Test Flight -...
INSIDERUnmanned Systems
Army Ends Future Attack and Reconnaissance Helicopter Development Program -...
ArticlesEnergy
Can Solid-State Batteries Commercialize by 2030? - Mobility Engineering...
Webcasts
AR/AI
From Data to Decision: How AI Enhances Warfighter Readiness
Energy
April Battery & Electrification Summit
Manufacturing & Prototyping
Tech Update: 3D Printing for Transportation in 2024
Test & Measurement
Building an Automotive EMC Test Plan
Manufacturing & Prototyping
The Moon and Beyond from a Thermal Perspective
Software
Mastering Software Complexity in Automotive: Is Release Possible...