Next-Generation Phased Radar Systems Lead to Hardware Improvements
More compact, lightweight, and efficient power dividers increase resolution and range for the next wave of fixed phased array systems.
Meeting the performance needs of the next generation of radar systems that will be deployed by the military is spurring the development of more efficient and sensitive hardware components to go along with the rapid advances in signal processing techniques and bandwidth.
The military uses radar for many purposes, including guiding missiles to targets, directing the firing of weapon systems, and providing long-distance surveillance and navigation information. However, for the next generation of systems currently in development, the most critical requirement is the ability to successfully counter saturation attacks. Such attacks may include numerous aircraft and missiles converging from multiple directions at the same time.
To meet this challenge, very high data rates are required to track a large number of simultaneous targets. Unfortunately, the level of data quality required is not achievable with the traditional rotating or fixed radar systems in use today.
Radar systems are often identified by type of scanning. The most common, mechanical scanning, involves the rotation of a parabolic dish or antenna through a 360-degree sweep of the horizon. As it rotates, pulses of radio waves or microwaves are transmitted and bounce off any object in its path. The object returns a tiny part of the wave’s energy.
These systems are not without limitations. Such systems provided limited tracking capabilities. Upon detecting a potential target, the radar typically waits a second or two for an additional sweep return so that it can correlate the two echoes, extract course and speed information, and start a new tracking process. Depending on the sweep rate, this wastes valuable time against an incoming enemy aircraft or weapon.
Mechanical-scan radars are also susceptible to damage. If the servomotors that cause the antenna to rotate or stabilize it fail, or the antenna is damaged, the radar is rendered inoperable. As a result, later generations of radar moved away from mechanical scanning toward fixed, phased array radar systems in which all movement is eliminated.
Fixed Phased Arrays
Phased arrays are composed of evenly spaced antenna elements, each of which emits a signal that incorporates a phase shift to produce a phase gradient across the array. The amplitudes of the signals radiated by the individual antennas, and the constructive and destructive interference caused by objects, determine the effective radiation pattern of the array.
By digitally varying the signal phases and amplitude of the elements in an array – a process known as digital beamforming – the main beam can be “steered” to determine the direction of the signal source, even though the antenna does not physically move.
Because of the rapidity at which the beam can be steered, phased array radars can perform search, track, and missile guidance functions simultaneously with a capability of over a hundred targets.
Phased array systems vary in size and complexity. For several decades, massive planar arrays have been used aboard Navy warships and are at the heart of the shipborne Aegis combat system and the Patriot Missile Systems. Smaller phased array antenna can be built to conform to specific shapes, like missiles, infantry support vehicles, ships, and aircraft.
Although there are several ways to accomplish electronic beam steering, one such technique involves varying the phasing between elements in a fixed, multi-element array. This is typically accomplished with power dividers that emit signals of varying phase and amplitude to the antennae.
As an example of the hardware improvements required in next-generation systems, power dividers serve as a prime example.
Hardware Improvements – Power Dividers
Power dividers are passive components that divide an input signal into two or more identical output signals. For phased array systems that require a range of signal amplitudes, the input signal is often altered using attenuators to vary the signals prior to output to deliver the desired signal level.
The traditional way of accomplishing this is to utilize a standard, multi-channel power divider with attenuators at each of the output ports. Attenuators, however, increase the overall size and weight of the unit while drawing additional precious watts of power. The size and weight of the power divider with attenuators made it difficult to deploy on jet planes that could benefit from more sophisticated radar.
There are power dividers that split power from 6.7 to 18.4 dB across the output ports and do not require attenuators. Operating between 1100 and 1500 MHz, the 8-way divider is optimized for space-constrained applications. The divider can handle 350W peak and 35 W CW.
The output signal is staggered in fixed amplitudes that begin at 18.4 dB at ports 1 and 8, 12.4 dB at 2 and 7, 8.6 dB at 3 and 6, and 6.7 dBs at ports 4 and 5. The 8-output ports are each connected to a fixed antenna. The power divider extends the coverage from one mile to several miles.
The next generation of phased array systems, along with advanced signal processing techniques, could have significant benefits for many branches of the military. For example, higher-resolution radar could be used to initiate a computer takeover in the event of a missile attack on a jet plane. Using sophisticated evaluation of the missile’s speed and trajectory, millisecond-to-millisecond, computer-controlled micro-adjustments could be used to evade the threat.
In an intense battlefield application with numerous vehicles and personnel, advanced radar could be used to not just track high-speed targets, but also slowmoving targets like ground troops. Armed with this information, the command center could have complete, realtime visibility of all moving components of a battlefield.
This article was written by Anuj Srivastava, President and CEO of Renaissance Electronics & Communications, Harvard, MA. For more information, Click Here .
Air Force Completes First Magnetic Navigation Flight on C-17 - Mobility...
University of Rochester Lab Creates New 'Reddmatter' Superconductivity Material...
Air Force Performs First Test of Microwave Counter Drone Weapon THOR - Mobility...
INSIDERElectronics & Computers
MIT Report Finds US Lead in Advanced Computing is Almost Gone - Mobility...
Navy Selects Lockheed Martin and Raytheon to Develop Hypersonic Missile -...
Boeing to Develop Two New E-7 Variants for US Air Force - Mobility Engineering...
How Metal Additive Manufacturing Is Driving the Future of Tooling
Microelectronics Design Security: Better with Formal Methods
Solving Complex Thermal Challenges of Today’s Space Market
Manufacturing & Prototyping
Traction-Motor Innovations for Passenger and Commercial Electric...
5 Ways to Test Wearable Devices
Mastering the Challenges of the Software Defined Vehicle: Digital...