MEMS Drive Wants to Shake up Automotive Sensor
Optical image stabilization technology from cell phones can find a home in your cars, says MEMS Drive CEO Colin Kwan.
Advanced optical image stabilization (OIS) technology used in mobile phones should have a home in the automotive world. Specifically, using microelectromechanical systems (MEMS) to move an image sensor in the X-Y plane to provide fast and accurate image stabilization against camera motion can make automotive sensors see better, especially in dark conditions.
That was the message from MEMS Drive Inc. president and CEO Colin Kwan at AutoSens USA 2024. MEMS Drive is a fabless semiconductor company that develops, manufactures and markets MEMS actuators and has been working on the technology for 25 years. MEMS Drive even designed the first actuator for moving image sensors in a mobile phone compact camera module.
Kwan said MEMS Drive stabilizes an image by moving the sensor and not the lens because the glass in a lens stack in an automotive camera can be a hundred times heavier than the image sensor. Kwan said MEMS Drive’s actuators can move the image sensor with sub-micron movement precision at a high frequency and in a fraction of a millisecond.
“We believe this is the future of automotive sensing,” Kwan said. “You’re talking about moving a few tenths of a milligram of an imager, so the speed can be much higher than moving the lens, obviously.”
The MEMS Drive OIS uses thousands of electrostatic comb drives arranged in four sets of actuators to move the “inner platform” of the sensor in X, Y and roll directions.
Tested two billion times
MEMS Drive is not the only company working on MEMS sensors for automotive use. Bosch’s SMI230 sensor, for example, detects acceleration and angular rates in three perpendicular axes. Silicon Sensing offers the CRH03, a stand-alone gyroscope for precise inertial sensing. MEMS Drive says MEMS technology is now ready for cars.
Kwan said MEMS Drive has already tested units with over two billion actuation cycles, enough to give him confidence that this smartphone technology can make the transition to automotive. The secret, he said, is the electrical conductive flexure (ECF). The ECF is what connects the signal/power line from the imager to the printed circuit board.
“ECF is a silicone structure, it’s not metal it’s not gold wire or other metallic element, so you won’t see any fractures,” he said. “That’s why the actuator can perform exactly the same after two billion cycles. You will not experience any problems in terms of signal integrity.”
Other benefits of the MEMS Drive OIS include negligible power consumption (less than 10 milliwatts) that doesn’t generate heat. The actuators can also operate in a wide range of environments because temperature does not impact the performance of the silicone, unlike sheet metal alloys, for example, he said. The system also has strong robustness against vibration, Kwan said, offering shake suppression within one frame.
“There is an increasing number of cameras being used in automotive,” Kwan said. “All these cameras experience similar situations and they have to compensate for different road conditions and then provide a stabilized image for the AI computing and under different lighting conditions to do what you need. This kind of MEMS device can provide a very long life and you needn’t worry about the robustness for vibration, temperature or mechanical shock. You find a lot of shake everywhere, no matter what camera you have, whether that’s a night shot or a drone or, of course, in automotive. This kind of shake can be effectively compensated by sensor movement.”
Top Stories
INSIDERDesign
This Robot Dog Detects Nuclear Material and Chemical Weapons
ArticlesEnergy
INSIDERDesign
New Anduril, Skydio Drones Start Field Testing in Romania
INSIDERData Acquisition
Atomic Fountain to Host Defense Research for Quantum Sensing
INSIDERAerospace
Testing the Viability of Autonomous Laser Welding in Space
INSIDERRF & Microwave Electronics
Webcasts
Power
Designing an HVAC Modeling Workflow for Cabin Energy Management and XiL Testing
Unmanned Systems
Countering the Evolving Challenge of Integrating UAS Into...
Aerospace
Best Practices for Developing Safe and Secure Modular Software
Manufacturing & Prototyping
How Pratt & Whitney Uses a Robot to Help Build Jet Engines
Unmanned Systems
Scaling Manufacturing and Production for 'Data as a Service' Electric Drone
Test & Measurement
A Quick Guide to Multi-Axis Simulation and Component Testing