Advanced Satellite Communications Research
The impact on wireless communication system performance was investigated for five channel conditions, which included (1) additive white Gaussian noise, (2) flat Raleigh fading, (3) frequency selective Raleigh fading, (4) flat Rician fading, and (5) frequency selective Rician fading.

New algorithm strategies and diverse communication techniques are constantly emerging in the telecommunications realm that consumers, commercial, government, and military demand in order to push the boundaries of data throughput to receive information as quickly as possible. Currently, the Ku/Ka satellite band (20–30 GHz) becomes congested during peak service. There has been a strong demand for a wider bandwidth and higher data rate in both cellular and satellite communication service. As the carrier frequency increases, a wider bandwidth can be made available, and a higher data rate can be obtained with beamforming or precoding. Particularly, the V band (50–75 GHz) and W band (75–110 GHz) offer unprecedented broadband capabilities and extremely large contiguous allocations of bandwidth. This is the reason NASA and AFRL have been investigating these bands for civilian and military use.
At W/V-band, the wavelength is on the order of 3 to 4 millimeters. Thus, receivers can be implemented via very small devices. Further, a W/V-band system can have a very narrow beam angle-spread, which can significantly reduce the interference among beams and recover propagation loss.
When a new wireless terrestrial or satellite communication system is planned, the channel path attenuation data is typically collected first by transmitting a carrier frequency signal without modulation under a line-of-sight (LOS) and an Additive White Gaussian Noise (AWGN) environment. Since the transmit power, PT, and the distance, dTR, between a transmitter (TX) and a receiver (RX) are known, the free space path loss, P path = (λ /4 π dTR)2 , can be precalculated for a given wavelength λ = c/fc, i.e., a given carrier frequency fc where c is the speed of the light. Hence, the channel attenuation, Pattn due to the channel medium can be obtained as Pattn = PT – PR – Ppath by measuring the received power PR at the RX for a given transmitted power PT.
These channel attenuation data can be obtained more economically than by sending a modulated signal. Data enables an RF communication system engineer to determine the appropriate transmit power, antenna type, antenna size, modulation type, forward error correction coding type, code rate, and data rate.
The technical objective of this project was to investigate bandwidth efficiency of wireless communication waveforms under Rayleigh and Rician fading environments, in addition to additive white Gaussian noise, for satellite communication links. Initial research, simulations, and analyses are presented in this report, but the entire scope of work was not completed due to limitation of funds and premature termination of the program.
In this work, the same bandwidth efficiency (BWE) conversion methods were used to model the estimated BWE of a W/V-band channel under Rayleigh and Rician fading. Both flat fading and frequency selective fading were considered for both types of fading (i.e., Rayleigh and Rican). Measured data from the W/V-band Terrestrial Link Experiment were used to model the communications channel. Simulations were conducted using adaptive code modulation (ACM) methods included in the Digital Video Broadcasting – Second Generation (DVBS2) communications protocol. Simulations and analysis was accomplished using Matlab tools. The DVB-S2 satellite link protocol has been in existence since 2014 and includes 28 possible combinations of forward error correction (FEC) coding and modulations, depending on the channel conditions.
Models and simulations were developed to compare the performance for an additive white Gaussian noise (AWGN) channel, a Rayleigh fading channel, and a Rician fading channel. Both flat and frequency selective channels were considered for the later two models. Simulations were performed using channel attenuation data measured at 72 GHz from the W/V-band Terrestrial Link Experiment. Analysis was presented using the DVB-S2 protocol. Results suggest that multipath fading significantly deteriorates performance.
Models and simulations were developed that implemented orthogonal frequency division multiplexing (OFDM), similar to that used by 5G wireless commercial networks. Implementation of OFDM improved performance against severe multipath fading environments. However, the bit error rate performance was worse than under a no-fading, AWGN channel.
This work was performed by Hyuck M. Kwon and Richard T. Lahman for the Air Force Research Laboratory, Space Vehicles Directorate. For more information, download the Technical Support Package (free white paper) below. AFRL-007723
This Brief includes a Technical Support Package (TSP).

Advanced Satellite Communications Research
(reference AFRL-007723) is currently available for download from the TSP library.
Don't have an account?
Overview
The document is a final report titled "Advanced Satellite Communications Research," authored by Hyuck M. Kwon and Richard T. Lahman from Wichita State University. It is based on research sponsored by the Air Force Research Laboratory (AFRL) under agreement number FA9453-21-2-0011. The report is dated June 30, 2023, and covers research conducted from February 2, 2018, to March 31, 2023.
The primary focus of the report is to present findings and advancements in the field of satellite communications, which is critical for various military and civilian applications. The research aims to enhance the capabilities of satellite communication systems, addressing challenges such as bandwidth limitations, signal integrity, and the integration of new technologies.
The report emphasizes the importance of scientific and technical information exchange, highlighting that the findings do not necessarily represent the official policies or endorsements of the U.S. Government or the AFRL. It is approved for public release, ensuring that the information is accessible to the general public, including foreign nationals.
The document includes acknowledgments of the support received from the AFRL and outlines the legal disclaimers regarding the use of government data and drawings. It clarifies that the research does not obligate the U.S. Government for any procurement purposes and that the publication of the report does not imply government approval or disapproval of its ideas or findings.
The report is structured to include various sections, including a table of contents and a list of figures, although specific details about the content of these sections are not provided in the pages available. The report is part of a broader effort to advance satellite communication technologies, which are essential for modern defense operations and civilian communications.
Overall, this document serves as a significant contribution to the field of satellite communications, providing insights into recent research developments and fostering collaboration and knowledge sharing among researchers, engineers, and policymakers in the domain. The findings and methodologies discussed in the report may have implications for future advancements in satellite technology and its applications.
Top Stories
INSIDERDesign
Venus Aerospace’s Rotating Detonation Rocket Engine Completes First Flight...
INSIDERDesign
Bombardier is Digitally Upgrading its Aircraft Design, Engineering and...
INSIDERDefense
How the US Army is Advancing Research in Robotics, AI and Autonomy
INSIDERManned Systems
New Copper Alloy Could Provide Breakthrough in Durability for Military Systems
Original EquipmentManned Systems
ACT Expo 2025: Heavy-Duty EVs, H2 Trucks and Tariff Talk Dominate Day One
Technology ReportPower
Webcasts
Defense
Soar to New Heights: Simulation-Driven Design for Safety in Electrified...
Software
Improving Signal and Power Integrity Performance in Automotive...
Aerospace
Transforming Quality Management with Data-Driven Analytics
Software
Enhancing Automotive Software Efficiency with vECU-based...
Aerospace
Precision Under Pressure: The Centerless Grinding Advantage in...
Photonics/Optics
Breaking Barriers in Space Communication with Optical Technology