Deformation Sensing in Soft Bio-Surrogate Materials
Accurate measurement of deformations occurring within or on soft materials has recently generated interest for its benefits to the fields of soft robotics and wearable biomedical sensors.
Deformation sensing in and on soft materials has garnered increased interest with the advancement of emerging technologies such as soft robotics, wearable computing, and biomedical applications. These applications have a need for quantification of stretching-contraction deformations along a single-axis as well as multi-directional deformation quantifications (i.e. bending, pressure, membrane stretch, planar and torsional shear).
These measurement devices must conform to the movements of the device or component under test, which can be complex, involving multiple degrees-of-freedom and dynamic rates, while closely matching the mechanical properties of the system they are embedded in, such as skin, tissue, textiles, and soft actuators. For example, soft actuators are increasingly used in the fields of bio-fidelic robotics and aerospace, however, there is an absence of reliable positional and force feedback, which is necessary to provide a soft touch as well as accurate and controllable behavior. Soft sensors are being implemented to provide this feedback, however, embedding them without hindering the actuator’s functionality has been a significant challenge.
Traditional strain gages, typically made of a resistive metal alloy element, cannot measure large strains (typically limited to strains < 1%). They are well suited to measure strain on stiffer materials (e.g., metals, composites, plastics), but cannot be used for strain measurements on soft materials, whose stiffness is much lower than the gage itself and whose strains may be greater than 20%, sometimes 250%+. In designing a soft strain sensor, the following requirements (application dependent) need to be considered:
Reliable, accurate quantification of small, intermediate, and large strains (20% +);
Type of quantification desired (i.e. normal or shear strain due to axial, bending, pressure, shear, or torsional loading);
Impedance matching of the sensor with the material system for accuracy as well as unimpeded movement;
Biomechanically relevant strain rates and frequency responses.
The objective of this research was to develop and characterize materials and sensors for measuring normal and shear strains in soft materials. Of particular interest was developing impedance matched soft strain sensors for use in anatomically correct, bio-surrogate injury assessments in visually obscured threat protection applications.
There are three types of electromechanical, soft sensors: piezoresistive, piezoelectric, and capacitive sensors.
Piezoresistive sensors exhibit a change of resistance under an applied deformation. The resistance change typically occurs as a result of deformation induced changes in the sensing element’s physical dimensions.
Piezoelectric sensors measure strain by transducing a stress-induced electric field. They are susceptible to temperature changes, however, and flexible piezoelectric materials, such as polymers, have a low piezoelectric coefficient.
Capacitive type sensors measure change in capacitance between a set or sets of embedded electrodes. Although capacitive type sensors can accommodate large deformations, they typically have very low sensitivity (gage factors < 1). For these reasons, the focus of this research was on piezoresistive type sensors.
This work was done by Christopher C. Rudolph for the Naval Research Laboratory. For more information, download the Technical Support Package (free white paper) here under the Sensors category. NRL-0076
This Brief includes a Technical Support Package (TSP).
Deformation Sensing in Soft Bio-Surrogate Materials
(reference NRL-0076) is currently available for download from the TSP library.
Don't have an account?
Top Stories
INSIDERDesign
This Robot Dog Detects Nuclear Material and Chemical Weapons
ArticlesEnergy
INSIDERDesign
New Anduril, Skydio Drones Start Field Testing in Romania
INSIDERData Acquisition
Atomic Fountain to Host Defense Research for Quantum Sensing
INSIDERAerospace
Testing the Viability of Autonomous Laser Welding in Space
INSIDERRF & Microwave Electronics
Webcasts
Power
Designing an HVAC Modeling Workflow for Cabin Energy Management and XiL Testing
Unmanned Systems
Countering the Evolving Challenge of Integrating UAS Into...
Aerospace
Best Practices for Developing Safe and Secure Modular Software
Manufacturing & Prototyping
How Pratt & Whitney Uses a Robot to Help Build Jet Engines
Unmanned Systems
Scaling Manufacturing and Production for 'Data as a Service' Electric Drone
Test & Measurement
A Quick Guide to Multi-Axis Simulation and Component Testing