MOBILITY ENGINEERING Produced by SAE Media Group
MOBILITY ENGINEERING
Magazines
Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Magazine cover

Current Issue

Archives

Low Power Optical Phase Array Using Graphene on Silicon Photonics

Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power.

Despite enormous advances in integrated photonics over the last decade, an efficient integrated phase delay remains to be demonstrated. This problem is fundamental – most monolithic thin film deposition relies on centro symmetric materials (such as silicon, silicon dioxide, silicon nitride), which by definition do not have an electro-optic effect. Such materials have been shown to be excellent transparent materials, however they are either optically passive, or rely on very small plasma dispersion effect or power-hungry thermo-optic effect for tunability. These phase change materials have losses associated due to heating or carrier injection in the waveguides. This research shows that graphene can be used to provide electro-optic properties to traditionally passive optical materials.

Figure 1. Graphene’s Electro-Optic Properties. (a) Theoretical absorption and refractive index as a function of Fermi level for intrinsic graphene (region I - high absorption, region II - low absorption). (b) Optical micrograph of the fabricated device (interferometer arms false colored). (c) Device cross section showing graphene-HfO2-graphene capacitor on Si3N4 waveguide.

Graphene is a versatile 2D material with wavelength-insensitive electrical tunability of its optical absorption and refractive index (Figure 1). As seen in Figure 1, theory predicts a strong tenability of the graphene’s optical properties with tuning of the Fermi level. This tuning is achieved here via electrostatic doping by embedding the graphene in a capacitor (as shown in Figure 1c). As the Fermi level is tuned, it is predicted that the absorption decreases (region I). As the tuning is further increased, the absorption becomes negligible, while the index of refraction changes drastically (region II and III). The ease of integration with silicon photonics and the capacitive nature of graphene electro-optic devices renders graphene an attractive choice for photonics. The electrostatic tunability of the optical properties of graphene lends graphene the novel capability of transcending any passive platform to an active device.

To date, the state-of-the-art graphene electro-optic modulators level has been mostly designed using the voltage tunable absorption of graphene. The potential of utilizing the voltage dependent refractive index tunability of graphene has been recently demonstrated. In these devices, however, the phase modulation is accompanied by loss modulation at low voltages of operation, where absorption and refractive index gets tuned simultaneously.

The regime of low loss and high refractive index of graphene has also been electrostatically tuned using electrolytic ion gels, which render these devices low speed. Using the current silicon-insulator- graphene configuration, the regime where the absorption of graphene is low and the phase change is high has not yet been achieved. Those devices are limited within the fermi energy level of 0.5 eV (region I of Figure 1a), where loss and phase change proceed simultaneously. Recently, the devices demonstrated have limited speed of operation since they use electrolyte, whereas the silicon-insula-tor-graphene configuration are limited to the high loss and phase change regime (region I of Figure 1a).

This work was done by Ipshita Datta, Brian Lee, and Michael Lipson, Columbia University, for the Air Force Research laboratory. AFRL-0265

Topics:
Aerospace Electronic Components Electronic equipment Electronics Electronics & Computers Materials Materials properties Optical Components Optics Optics Photonics Research and development Waveguides
This Brief includes a Technical Support Package (TSP).
Document cover
Low Power Optical Phase Array Using Graphene on Silicon Photonics

(reference AFRL-0265) is currently available for download from the TSP library.

Don't have an account?

More From SAE Media Group

    Magazine cover
    Aerospace & Defense Technology Magazine

    This article first appeared in the September, 2018 issue of Aerospace & Defense Technology Magazine.

    Read more articles from this issue here.

    Read more articles from the archives here.

    Overview

    The document titled "Low Power Optical Phase Array Using Graphene on Silicon Photonics" presents research focused on the development of an electro-refractive modulator utilizing graphene, a material known for its unique electro-optic properties. The report, authored by Ipshita Datta, Brian Lee, and Michal Lipson from Columbia University, details experimental demonstrations and theoretical methodologies aimed at enhancing optical systems through the integration of graphene with silicon photonics.

    The introduction outlines the background of graphene's electro-optic properties, emphasizing its potential for high-speed modulation and low power consumption. The authors discuss the significance of graphene's bandwidth and the importance of effective contact methods for integrating graphene into photonic devices. The approach taken in the research includes the design and fabrication of modulators that leverage graphene's properties to achieve efficient phase modulation with minimal absorption loss.

    In the results and discussion section, the document highlights the successful demonstration of a graphene electro-refractive modulator. The modulator operates in a regime where the absorption of graphene is modulated minimally (less than 1 dB), while the phase modulation is significant, achieving a strong response in a compact device. This capability is crucial for applications in optical communications and signal processing, where maintaining signal integrity while enabling rapid modulation is essential.

    The report also discusses the impact of using ammonium persulfate in the fabrication process, which enhances the performance of the modulator. Additionally, it explores mid-infrared modulation capabilities of graphene, indicating its versatility across different wavelengths.

    The conclusions drawn from the research emphasize the potential of graphene-based devices in advancing silicon photonics, particularly in creating low-power, high-performance optical systems. The authors recommend further exploration of graphene edge contacts and other fabrication techniques to optimize device performance.

    Overall, this document contributes valuable insights into the integration of graphene with silicon photonics, showcasing its promise for future optical technologies. The findings are relevant for researchers and engineers working in the fields of photonics, telecommunications, and materials science, as they pave the way for innovative applications in high-speed optical systems.

    Top Stories

    INSIDERManned Systems

    Feature Image Venus Aerospace’s Rotating Detonation Rocket Engine Completes First Flight...

    INSIDERSoftware

    Feature Image Bombardier is Digitally Upgrading its Aircraft Design, Engineering and...

    INSIDERManned Systems

    Feature Image New Copper Alloy Could Provide Breakthrough in Durability for Military Systems

    Technology ReportSoftware

    Feature Image SkillReal Signs Tier 1 Supplier for NVIDIA-Powered AI Inspection

    INSIDERDefense

    Feature Image How the US Army is Advancing Research in Robotics, AI and Autonomy

    NewsGreen Design & Manufacturing

    Feature Image ACT Expo 2025: Heavy-Duty EVs, H2 Trucks and Tariff Talk Dominate Day One

    Webcasts